Draft: Intersection/Пересечение

From FreeCAD Documentation
Revision as of 10:50, 29 November 2018 by Luc (talk | contribs) (Created page with "=== Описание === Этот режим привязки позволяет вам выбрать пересечение двух сегментов линии или д...")

Draft Intersection

Системное название
Draft Intersection
Расположение в меню
Черчение → Привязка → Пересечение
Верстаки
Draft, Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Описание

Этот режим привязки позволяет вам выбрать пересечение двух сегментов линии или дуги.


Use

  1. Make sure snap mode is turned on
  2. Choose element to be inserted into the FreeCAD-document

On Linux

  1. Move cursor near the Intersection of the elements you wish to attach your element to
  2. Below on the right side of the cursor the symbol of the snap mode will appear
  3. Click to attach your element to the selected intersection point of target elements

On Windows

  1. Press CTRL and move mouse near to intersection
  2. Below on the right side of the cursor the symbol of the snap mode will appear
  3. Click to attach your element to the selected intersection point of target elements

Works also with Draft Move and Draft Rotate


Notes

Snap mode can be used with

  • sketcher elements (lines)
  • draft elements (DWires, Lines)

Clicking on the snap-mode icon will toggle the snap mode on/off.