Compile on Linux/pt: Difference between revisions
(Updating to match new version of source page) |
(Updating to match new version of source page) |
||
Line 506: | Line 506: | ||
{{Code|lang=bash|code= |
{{Code|lang=bash|code= |
||
# from |
# from your freecad source folder: |
||
mkdir build |
mkdir build |
||
cd build |
cd build |
Revision as of 17:26, 28 January 2024
Overview
On recent linux distributions, FreeCAD is generally easy to build, since all dependencies are usually provided by the package manager. It basically involves 3 steps:
- Getting the FreeCAD source code
- Getting the dependencies or packages that FreeCAD depends on
- Configure with
cmake
and compile withmake
Below, you'll find detailed explanations of the whole process, some build scripts, and particularities you might encounter. If you find anything wrong or out of date in the text below (Linux distributions change often), or if you use a distribution which is not listed, discuss the issue in the forum, and help us correct it.
General workflow to compile FreeCAD from source. The third party dependencies must be in the system, as well as the FreeCAD source code itself. CMake configures the system so that with a single make instruction the entire project is compiled.
Getting the source
Git
The best way to get the code is to clone the read-only Git repository. For this you need the git
program which can be easily installed in most Linux distributions. It can also be obtained from the official website.
Git can be installed via the following command:
sudo apt install git
The following command will place a copy of the latest version of the FreeCAD source code in a new directory called freecad-source
.
git clone --recurse-submodules https://github.com/FreeCAD/FreeCAD.git freecad-source
For more information on using Git and contributing code to the project, see Source code management.
Source archive
Alternatively you can download the source as an archive, a .zip
or .tar.gz
file, and unpack it in the desired directory.
Getting the dependencies
To compile FreeCAD you have to install the requisite dependencies mentioned in Third Party Libraries; the packages that contain these dependencies are listed below for different Linux distributions. Please note that the names and availability of the libraries will depend on your particular distribution; if your distribution is old, some packages may be unavailable of have a different name. In this case, look in the older and non-conventional distributions section below.
Once you have all the dependencies installed, proceed to compile FreeCAD.
Please note that FreeCAD's source code is around 500 MB in size; it may be three times as big if you clone the Git repository with its entire modification history. Getting all dependencies may require downloading 500 MB or more of new files; when these files are unpacked they may require 1500 MB or more in space. Also beware that the compilation process may generate up to 1500 MB of additional files as the system copies and modifies the entire source code. Therefore, be sure you have enough free space in your hard drive, at least 4 GB, when attempting compilation.
Debian and Ubuntu
On Debian-based systems (Debian, Ubuntu, Mint, etc.) it is quite easy to get all needed dependencies installed. Most of the libraries are available via apt
or the Synaptic package manager.
If you already installed FreeCAD from the official repositories, you can install its build dependencies with this single line of code in a terminal:
sudo apt build-dep freecad
However, if the version of FreeCAD in the repositories is old, the dependencies may be the wrong ones to compile a recent version of FreeCAD. Therefore, please verify that you have installed the following packages.
These packages are essential for any sort of compilation to succeed:
build-essential
, installs the C and C++ compilers, the C development libraries, and themake
program.cmake
, essential tool to configure the source of FreeCAD. You may also wish to installcmake-gui
andcmake-curses-gui
for a graphical option.libtool
, essential tools to produce shared libraries.lsb-release
, the standard base reporting utility is normally already installed in a Debian system, and allows you to programmatically distinguish between a pure Debian installation or a variant, such as Ubuntu or Linux Mint. Do not remove this package, as many other system packages may depend on it.
Compilation of FreeCAD uses the Python language, and it's also used at runtime as a scripting language. If you are using a Debian based distribution the Python interpreter is normally already installed.
python3
swig
, the tool that creates interfaces between C++ code and Python.
Please check that you have Python 3 installed. Python 2 was obsoleted in 2019, so new development in FreeCAD is not tested with this version of the language.
The Boost libraries need to be installed:
libboost-dev
libboost-date-time-dev
libboost-filesystem-dev
libboost-graph-dev
libboost-iostreams-dev
libboost-program-options-dev
libboost-python-dev
libboost-regex-dev
libboost-serialization-dev
libboost-thread-dev
The Coin libraries need to be installed:
libcoin80-dev
, for Debian Jessie, Stretch, Ubuntu 16.04 to 18.10, orlibcoin-dev
, for Debian Buster, Ubuntu 19.04 and newer, as well as for Ubuntu 18.04/18.10 with the freecad-stable/freecad-daily PPAs added to your software sources.
Several libraries that deal with mathematics, triangulated surfaces, sorting, meshes, computer vision, cartographic projections, 3D visualization, the X11 Window system, XML parsing, and Zip file reading:
libeigen3-dev
libgts-bin
libgts-dev
libkdtree++-dev
libmedc-dev
libopencv-dev
orlibcv-dev
libproj-dev
libvtk7-dev
orlibvtk6-dev
libx11-dev
libxerces-c-dev
libyaml-cpp-dev
libzipios++-dev
Python 2 and Qt4
This is not recommended for newer installations as both Python 2 and Qt4 are obsolete. As of version 0.20, FreeCAD no longer supports them.
To compile FreeCAD for Debian Jessie, Stretch, Ubuntu 16.04, using Python 2 and Qt4, install the following dependencies.
qt4-dev-tools
libqt4-dev
libqt4-opengl-dev
libqtwebkit-dev
libshiboken-dev
libpyside-dev
pyside-tools
python-dev
python-matplotlib
python-pivy
python-ply
python-pyside
Python 3 and Qt5
To compile FreeCAD for Debian Buster, Ubuntu 19.04 and newer, as well as Ubuntu 18.04/18.10 with the freecad-stable/freecad-daily PPAs added to your software sources, install the following dependencies.
qtbase5-dev
qttools5-dev
qt5-default
(if compiling 0.20 on a machine that still has Qt4)libqt5opengl5-dev
libqt5svg5-dev
qtwebengine5-dev
libqt5xmlpatterns5-dev
libqt5x11extras5-dev
libpyside2-dev
libshiboken2-dev
pyside2-tools
pyqt5-dev-tools
python3-dev
python3-matplotlib
python3-packaging
python3-pivy
python3-ply
python3-pyside2.qtcore
python3-pyside2.qtgui
python3-pyside2.qtsvg
python3-pyside2.qtwidgets
python3-pyside2.qtnetwork
python3-pyside2.qtwebengine
python3-pyside2.qtwebenginecore
python3-pyside2.qtwebenginewidgets
python3-pyside2.qtwebchannel
python3-pyside2uic
OpenCascade kernel
The OpenCascade kernel is the core graphics library to create 3D shapes. It exists in an official version OCCT, and a community version OCE. The community version is no longer recommended, as it's outdated.
For Debian Buster and Ubuntu 18.10 and newer, as well as Ubuntu 18.04 with the freecad-stable/freecad-daily PPAs added to your software sources, install the official packages.
libocct*-dev
libocct-data-exchange-dev
libocct-draw-dev
libocct-foundation-dev
libocct-modeling-algorithms-dev
libocct-modeling-data-dev
libocct-ocaf-dev
libocct-visualization-dev
occt-draw
For Debian Jessie, Stretch, Ubuntu 16.04 and newer, install the community edition packages.
liboce*-dev
liboce-foundation-dev
liboce-modeling-dev
liboce-ocaf-dev
liboce-ocaf-lite-dev
liboce-visualization-dev
oce-draw
You may install the libraries individually, or using asterisk expansion. Change occ
for oce
if you want to install the community libraries.
sudo apt install libocct*-dev
Optional packages
Optionally you can also install these extra packages:
libsimage-dev
, to make Coin support additional image file formats.doxygen
andlibcoin-doc
(orlibcoin80-doc
for older systems), if you intend to generate source code documentation.libspnav-dev
, for 3D input devices support, like the 3Dconnexion "Space Navigator" or "Space Pilot".checkinstall
, if you intend to register your installed files into your system's package manager, so you can uninstall it later.
Single command for Python 3 and Qt5
Requires Pyside2 available in Debian buster and the freecad-stable/freecad-daily PPAs.
sudo apt install cmake cmake-gui libboost-date-time-dev libboost-dev libboost-filesystem-dev libboost-graph-dev libboost-iostreams-dev libboost-program-options-dev libboost-python-dev libboost-regex-dev libboost-serialization-dev libboost-thread-dev libcoin-dev libeigen3-dev libgts-bin libgts-dev libkdtree++-dev libmedc-dev libocct-data-exchange-dev libocct-ocaf-dev libocct-visualization-dev libopencv-dev libproj-dev libpyside2-dev libqt5opengl5-dev libqt5svg5-dev qtwebengine5-dev libqt5x11extras5-dev libqt5xmlpatterns5-dev libshiboken2-dev libspnav-dev libvtk7-dev libx11-dev libxerces-c-dev libzipios++-dev occt-draw pyside2-tools python3-dev python3-matplotlib python3-packaging python3-pivy python3-ply python3-pyside2.qtcore python3-pyside2.qtgui python3-pyside2.qtsvg python3-pyside2.qtwidgets python3-pyside2.qtnetwork python3-pyside2.qtwebengine python3-pyside2.qtwebenginecore python3-pyside2.qtwebenginewidgets python3-pyside2.qtwebchannel python3-markdown python3-git python3-pyside2uic qtbase5-dev qttools5-dev swig libyaml-cpp-dev
NOTE: On some versions of Ubuntu and some versions of Qt, you will get an error that python3-pyside2uic cannot be found -- on those systems you can safely omit it. On Ubuntu 20.04 you will need to add pyqt5-dev-tools
. More information can be found in this forum discussion.
Single command for Python 2 and Qt4
This is not recommended for newer installations as both Python 2 and Qt4 are obsolete.
sudo apt install cmake debhelper dh-exec dh-python libboost-date-time-dev libboost-dev libboost-filesystem-dev libboost-graph-dev libboost-iostreams-dev libboost-program-options-dev libboost-python-dev libboost-regex-dev libboost-serialization-dev libboost-thread-dev libcoin80-dev libeigen3-dev libgts-bin libgts-dev libkdtree++-dev libmedc-dev libocct-data-exchange-dev libocct-ocaf-dev libocct-visualization-dev libopencv-dev libproj-dev libpyside-dev libqt4-dev libqt4-opengl-dev libqtwebkit-dev libshiboken-dev libspnav-dev libvtk6-dev libx11-dev libxerces-c-dev libzipios++-dev lsb-release occt-draw pyside-tools python-dev python-matplotlib python-pivy python-ply swig
Ubuntu 16.04 users please see also the compilation discussion in the forum: Compile on Linux (Kubuntu): CMake can't find VTK.
Raspberry Pi
Follow the same steps as in Debian and Ubuntu.
There are problems reported when trying to compile in Raspberry PI OS 32-bit with Python 3 and Qt5, but the combination Python 3 and Qt4 seems to work for older versions of FreeCAD (with minor issues).
For newer versions of FreeCAD (>= 0.20) the compilation with Py3/Qt5 is successful if the operating system installed is Raspberry Pi OS 64-bit or Ubuntu 20.04.
Due to different issues with Qt, in Ubuntu 20.04 the normal PySide tools won't be found.
E: Unable to locate package python3-pyside2uic
In this case, we can install the packages from PyQt and create symbolic links to the needed tools.
sudo apt-get install pyqt5-dev
sudo apt-get install pyqt5-dev-tools
cd /usr/bin/
ln -s pyrcc5 pyside2-rcc
ln -s pyuic5 pyside2-uic
Now compilation may proceed.
cd freecad-build/
cmake ../freecad-source -DBUILD_QT5=ON -DPYTHON_EXECUTABLE=/usr/bin/python3 -DUSE_PYBIND11=ON
make -j2
The -j
option to make
should not be more than 3 because the Raspberry Pi has limited memory. It will take several hours to compile, so it is better to do it overnight.
More information, FreeCAD and Raspberry Pi 4.
Fedora
There is a bug in cmake distributed by Fedora 34/35 which results in cmake failing to find the opencascade libraries. This can easily be fixed by making one minor change to the top level cmake file of opencascade installed on Fedora. Details here: https://bugzilla.redhat.com/show_bug.cgi?id=2083568.
Near the top of the file OpenCASCADEConfig.cmake, change the following line to use REAL_PATH()
. This fixes a bug introduced by the use of a symlink from /lib
to /usr/lib
of Fedora, which causes cmake to fail.
This file is usually installed in /usr/lib64/cmake/opencascade/OpenCASCADEConfig.cmake.
get_filename_component (OpenCASCADE_INSTALL_PREFIX "${OpenCASCADE_INSTALL_PREFIX}" PATH)
change this to:
file (REAL_PATH ${OpenCASCADE_INSTALL_PREFIX} OpenCASCADE_INSTALL_PREFIX)
This trivial change needs to be made inside the build directory once cmake has been run and failed. Re-running cmake will then correctly detect the OCCT libraries in the normal way.
You need the following packages:
gcc-c++
(or possibly another C++ compiler?)cmake
doxygen
swig
gettext
dos2unix
desktop-file-utils
libXmu-devel
freeimage-devel
mesa-libGLU-devel
opencascade-devel
openmpi-devel
python3
python3-devel
python3-pyside2
python3-pyside2-devel
pyside2-tools
boost-devel
tbb-devel
eigen3-devel
qt-devel
qt5-qtwebengine-devel
qt5-qtxmlpatterns
qt5-qtxmlpatterns-devel
qt5-qtsvg-devel
qt5-qttools-static
ode-devel
xerces-c
xerces-c-devel
opencv-devel
smesh-devel
Coin3
Coin3-devel
yaml-cpp
(April 2021, Coin4 and Coin4-devel are available) (if coin2 is the latest available for your version of Fedora, use packages from http://www.zultron.com/rpm-repo/)
SoQt-devel
freetype
freetype-devel
vtk
vtk-devel
med
med-devel
And optionally:
libspnav-devel
(for 3Dconnexion devices support like the Space Navigator or Space Pilot)python3-pivy
(https://bugzilla.redhat.com/show_bug.cgi?id=458975 Pivy is not mandatory but needed for the Draft Workbench)python3-markdown
(for the Addon Manager to display native markdown)python3-GitPython
(for the Addon Manager to use git to checkout and update workbenches and macros)
To install all dependencies at once (tested on fedora 36 and 37):
sudo dnf install gcc-c++ cmake doxygen swig gettext dos2unix desktop-file-utils libXmu-devel freeimage-devel mesa-libGLU-devel opencascade-devel openmpi-devel python3 python3-devel python3-pyside2 python3-pyside2-devel pyside2-tools boost-devel tbb-devel eigen3-devel qt-devel qt5-qtwebengine-devel qt5-qtxmlpatterns qt5-qtxmlpatterns-devel qt5-qtsvg-devel qt5-qttools-static ode-devel xerces-c xerces-c-devel opencv-devel smesh-devel Coin3 Coin3-devel SoQt-devel freetype freetype-devel vtk vtk-devel med med-devel libspnav-devel python3-pivy python3-markdown python3-GitPython yaml-cpp
Gentoo
Easiest way to check which packages are needed to compile FreeCAD is to check via portage:
emerge -pv freecad
This should give a nice list of extra packages that you need installed on your system.
If FreeCAD is not available on portage, it is available on the waebbl overlay. The issue tracker on the waebbl overlay Github may help guide through some issues you may come across. The overlay provides freecad-9999, which you can choose to compile, or simply use to get the dependencies.
layman -a waebbl
openSUSE
Tumbleweed
The following commands will install the packages required for building FreeCAD with Qt5 and Python 3.
zypper in --no-recommends -t pattern devel_C_C++ devel_qt5
zypper in libqt5-qtbase-devel libqt5-qtsvg-devel libqt5-qttools-devel boost-devel swig libboost_program_options-devel libboost_mpi_python3-devel libboost_system-devel libboost_program_options-devel libboost_regex-devel libboost_python3-devel libboost_thread-devel libboost_system-devel libboost_headers-devel libboost_graph-devel python3 python3-devel python3-matplotlib python3-matplotlib-qt5 python3-pyside2 python3-pyside2-devel python3-pivy gcc gcc-fortran cmake occt-devel libXi-devel opencv-devel libxerces-c-devel Coin-devel SoQt-devel freetype2-devel eigen3-devel libode6 vtk-devel libmed-devel hdf5-openmpi-devel openmpi2-devel netgen-devel freeglut-devel libspnav-devel f2c doxygen dos2unix glew-devel yaml-cpp
The following command will install Qt Creator and the GNU Project Debugger.
zypper in libqt5-creator gdb
If any packages are missing, then you can check the Tumbleweed "FreeCAD.spec" file on the Open Build Service.
Also, check to see if there are any patches you need to apply (such as 0001-find-openmpi2-include-files.patch).
Leap
If there is a difference between the available packages on Tumbleweed and Leap, then you can read the Leap "FreeCAD.spec" file on the Open Build Service to determine the required packages.
Arch Linux
You will need the following libraries from the official repositories:
boost
cmake
coin
curl
desktop-file-utils
eigen
gcc-fortran
git
glew
hicolor-icon-theme
jsoncpp
libspnav
med
nlohmann-json
opencascade
pyside2-tools
pyside2
python-matplotlib
python-netcdf4
python-packaging
python-pivy
qt5-svg
qt5-tools
qt5-webengine
shared-mime-info
shiboken2
swig
utf8cpp
xerces-c
yaml-cpp
sudo pacman -S --needed boost cmake coin curl desktop-file-utils eigen gcc-fortran git glew hicolor-icon-theme jsoncpp libspnav med nlohmann-json opencascade pyside2-tools pyside2 python-matplotlib python-netcdf4 python-packaging python-pivy qt5-svg qt5-tools qt5-webengine shared-mime-info shiboken2 swig utf8cpp xerces-c yaml-cpp
Older and non-conventional distributions
On other distributions, we have very few feedback from users, so it might be harder to find the required packages.
Try first locating the required libraries mentioned in third party libraries in your package manager. Beware that some of them might have a slightly different package name; search for name
, but also libname
, name-dev
, name-devel
, and similar. If that is not possible try compiling those libraries yourself.
FreeCAD requires the GNU g++ compiler version equal or above 3.0.0, as FreeCAD is mostly written in C++. During the compilation some Python scripts are executed, so the Python interpreter has to work properly. To avoid any linker problems it is also a good idea to have the library paths in the LD_LIBRARY_PATH
variable or in the ld.so.conf
file. This is already done in modern Linux distributions, but may need to be set in older ones.
Pivy
Pivy (Python wrappers to Coin3d) is not needed to build FreeCAD or to start it, but it is needed as a runtime dependency by the Draft Workbench. If you are not going to use this workbench, you won't need Pivy. However, do notice that the Draft Workbench is used internally by other workbenches, like Arch and BIM, so Pivy needs to be installed to use these workbenches as well.
By November 2015 the obsolete version of Pivy included with the FreeCAD source code will no longer compile on many systems. This isn't a big problem as normally you should get Pivy from your distribution's package manager; if you cannot find Pivy, you may have to compile it yourself, see Pivy compilation instructions.
Debug symbols
In order to troubleshoot crashes in FreeCAD, it is useful to have the debug symbols of important dependency libraries such as Qt. For this, try installing the dependency packages that end with -dbg
, -dbgsym
, -debuginfo
or similar, depending on your Linux distribution.
For Ubuntu, you may have to enable special repositories to be able to see and install these debug packages with the package manager. See Debug Symbol Packages for more information.
Compile FreeCAD
FreeCAD uses CMake as its main build system, as it's available on all major operating systems. Compiling with CMake is usually very simple and happens in two steps.
- CMake checks that every needed program and library is present on your system, and generates a
Makefile
that is configured for the second step. FreeCAD has several configuration options to choose from, but it comes with sensible defaults. Some alternatives are detailed below. - The compilation itself, which is done with the program
make
, which generates the FreeCAD executables.
Since FreeCAD is a large application, compiling the entire source code can take anywhere from 10 minutes to one hour, depending on your CPU and the number of CPU cores used for compilation.
Building
To build simply create a build directory, build
. Then from this build directory point cmake
to the right source folder. You can use cmake-gui
or ccmake
instead of cmake
in the instructions below as well. Once cmake
finishes configuring the environment, use make
to start the actual compilation.
# from your freecad source folder:
mkdir build
cd build
cmake ../
make -j$(nproc --ignore=2)
The -j
option of make
controls how many jobs (files) are compiled in parallel. The nproc
program prints the number of CPU cores in your system; by using it together with the -j
option you can choose to process as many files as you have cores, in order to speed up overall compilation of the program. In the example above, it will use all cores in your system except two; this will keep your computer responsive for other uses while compilation proceeds in the background. The FreeCAD executable will eventually appear in the build/bin
directory. See also Compiling (speeding up) to improve compilation speed.
Resolving cmake issues
If you have done a build before and get stuck on a dependency that is not recognized or can't seem to be resolved, try the following:
- Delete the contents of the build directory before running cmake again. FreeCAD is a rapidly moving target, you may be tripping over cached cmake information that points at an older version than the new repository head can use. Clearing the cache may allow cmake to recover and recognize the version you actually need.
- If cmake complains about missing a specific file, use a tool such as "apt-file search", or its equivalent in other package systems, to discover what package that file belongs to and install it. Bear in mind that you are likely to need the -dev version of the package that carries header or config files files required for FreeCAD to use the package.
Compiling against GNU libc 2.34 and later
GNU libc 2.34 introduces a change to the library that can cause builds on some Linux systems to fail with an error like:
No rule to make target '/usr/lib/x86_64-linux-gnu/libdl.so
To resolve this, a symbolic link must be manually created from the (now empty) system-installed libdl.so.* to the location your compiler says it is looking for the file. For example (if the actual installed copy of libdl.so on your system is /usr/lib/x86_64-linux-gnu/libdl.so.2):
sudo ln -s /usr/lib/x86_64-linux-gnu/libdl.so.2 /usr/lib/x86_64-linux-gnu/libdl.so
Adapt the command for the structure of your system by searching for libdl.so* and linking it to the appropriate location.
How to repair your source code directory
If you accidentally performed a compilation inside the source code directory, or added strange files, and would like to restore the contents to only the original source code, you can perform the following steps.
> .gitignore
git clean -df
git reset --hard HEAD
The first line clears the .gitignore
file. This ensures that the following clean and reset commands will affect everything in the directory and will not ignore items matching the expressions in .gitignore
. The second line deletes all files and directories that are not tracked by the git repository; then the last command will reset any changes to tracked files, including the first command which cleared the .gitignore
file.
If you do not clear the source directory, subsequent runs of cmake
may not capture new options to the system if the code changes.
Configuration
By passing different options to cmake
, you can change how FreeCAD is compiled. The syntax is as follows.
cmake -D <var>:<type>=<value> $SOURCE_DIR
Where $SOURCE_DIR
is the directory that contains the source code. The <type>
may be omitted in most cases. The space after the -D
option may also be omitted.
For example, to avoid building the FEM Workbench:
cmake -D BUILD_FEM:BOOL=OFF ../freecad-source
cmake -DBUILD_FEM=OFF ../freecad-source
All possible variables are listed in the InitializeFreeCADBuildOptions.cmake
file, located in the cMake/FreeCAD_Helpers
directory. In this file, search for the word option
to get to the variables that can be set, and see their default values.
# ============================================================================== # ================= All the options for the build process ================= # ============================================================================== option(BUILD_FORCE_DIRECTORY "The build directory must be different to the source directory." OFF) option(BUILD_GUI "Build FreeCAD Gui. Otherwise you have only the command line and the Python import module." ON) option(FREECAD_USE_EXTERNAL_ZIPIOS "Use system installed zipios++ instead of the bundled." OFF) option(FREECAD_USE_EXTERNAL_SMESH "Use system installed smesh instead of the bundled." OFF) ...
Alternatively, use the command cmake -LH
to list the current configuration, and thus all variables that can be changed. You may also install and use cmake-gui
to launch a graphical interface showing all the variables that can be modified. In the next sections we list some of the more relevant options that you may want to use.
For a Debug build
Create a Debug
build to troubleshoot crashes in FreeCAD. Beware that with this build the Sketcher becomes very slow with complex sketches.
cmake -DPYTHON_EXECUTABLE=/usr/bin/python3 -DCMAKE_BUILD_TYPE=Debug ../freecad-source
For a Release build
Create a Release
build to test code that doesn't crash. A Release
build will run much faster than a Debug
build.
cmake -DPYTHON_EXECUTABLE=/usr/bin/python3 -DCMAKE_BUILD_TYPE=Release ../freecad-source
Building against Python 3 and Qt5
Support for Python 2 and Qt4 has been removed in FreeCAD 0.20 and it is not necessary to explicitly enable Qt5 and Python 3 if compiling the latest versions. Qt6 support is currently in development and does not work yet. Unless you plan on assisting with the Qt6 migration effort, FREECAD_QT_VERSION should be left at "Auto" (the default) or explicitly set to "5".
For 0.20 and 0.21_dev:
cmake ../freecad-source
Note that when switching between 0.20 and the 0.21_dev builds, it may be necessary to delete CMakeCache.txt prior to running cmake.
Building for a specific Python version
If the default python
executable in your system is a symbolic link to Python 2, cmake
will try to configure FreeCAD for this version. You must then choose another version of Python by giving the path to a specific executable:
cmake -DPYTHON_EXECUTABLE=/usr/bin/python3 ../freecad-source
If that doesn't work, you may have to define additional variables pointing to the desired Python libraries and include directories:
cmake -DPYTHON_EXECUTABLE=/usr/bin/python3.6 \
-DPYTHON_INCLUDE_DIR=/usr/include/python3.6m \
-DPYTHON_LIBRARY=/usr/lib/x86_64-linux-gnu/libpython3.6m.so \
-DPYTHON_PACKAGES_PATH=/usr/lib/python3.6/site-packages/ \
../freecad-source
It is possible to have several independent versions of Python in the same system, so the locations and version numbers of your Python files will depend on your particular Linux distribution. Use python3 -V
to display the version of Python that you are using currently; only the first two numbers are necessary; for example, if the result is Python 3.6.8
, you need to specify the directories that relate to the 3.6 version. If you don't know the right directories, try searching for them with the locate
command.
locate python3.6
You may use python3 -m site
in a terminal to determine the site-packages
directory, or dist-packages
for Debian systems.
Some components of FreeCAD, such as PySide, try to autodetect the most recent Python version installed on your system, which might fail if it is different from what you entered above. Adding the following cMake option might solve the issue:
-DPython3_FIND_STRATEGY=LOCATION
Building with Qt Creator against Python 3 and Qt5
1. Launch Qt Creator.
2. Click on Open Project.
3. Navigate to the directory where the source code is, freecad-source/
, and choose the topmost CMakeLists.txt
file.
4. By selecting the file, it will automatically run cmake
on it, but it may fail if the appropriate options aren't correctly set.
5. Go to Projects → Build & Run → Imported Kit → Build → Build Settings → CMake. Set the appropriate build directory, build/
.
6. Set the appropriate variables in the Key-Value dialog, of types String
and Bool
.
PYTHON_EXECUTABLE=/usr/bin/python3
7. If the variables do not load the project correctly, you may have to go to Projects → Manage Kits → Kits → Default (or Imported Kit or similar) → CMake Configuration. Then press Change, and add the appropriate configuration as described above. You may have to add more variables about the Python paths, if the system Python is not found.
PYTHON_EXECUTABLE:STRING=/usr/bin/python3.7
PYTHON_INCLUDE_DIR:STRING=/usr/include/python3.7m
PYTHON_LIBRARY:STRING=/usr/lib/x86_64-linux-gnu/libpython3.7m.so
PYTHON_PACKAGES_PATH:STRING=/usr/lib/python3.7/site-packages
7.1. Press Apply, then OK.
7.2. Make sure the rest of the options are correctly set, for example, Qt version should be a present version installed in the system, like Qt 5.9.5 in PATH (qt5)
.
Press Apply, then OK to close the configuration.
The cmake
program should run automatically again, and it should fill the entire Key-Value dialog with all the variables that can be configured.
8. Go to Projects → Build & Run → Imported Kit → Run → Run Settings → Run → Run Configuration and choose FreeCADMain
to compile the graphical version of FreeCAD, or FreeCADMainCMD
to compile only the command line version.
9. Finally, go to the menu Build → Build Project "FreeCAD". If this is a new compilation, it should take several minutes, inclusive hours, depending on the number of processors that you have available.
Qt designer plugin
If you want to develop Qt code for FreeCAD, you'll need the Qt Designer plugin that provides all custom widgets of FreeCAD.
Go into an auxiliary directory of the source code, the run qmake
with the indicated project file to create a Makefile
; then run make
to compile the plugin.
cd freecad-source/src/Tools/plugins/widget
qmake plugin.pro
make
If you are compiling for Qt5, make sure the qmake
binary is the one for this version, so that the resulting Makefile
contains the necessary information for Qt5.
cd freecad-source/src/Tools/plugins/widget
$QT_DIR/bin/qmake plugin.pro
make
where $QT_DIR
is the directory that stores Qt binary libraries, for example, /usr/lib/x86_64-linux-gnu/qt5
.
The library created is libFreeCAD_widgets.so
, which needs to be copied to $QT_DIR/plugins/designer
.
sudo cp libFreeCAD_widgets.so $QT_DIR/plugins/designer
External or internal Pivy
Previously, a version of Pivy was included in the source code of FreeCAD (internal). If you wanted to use your system's copy of Pivy (external), you needed to use -DFREECAD_USE_EXTERNAL_PIVY=1
.
Using external Pivy became the default during development of FreeCAD 0.16, therefore this option does not need to be set manually anymore.
Doxygen documentation
If you have Doxygen installed you can build the source code documentation. See source documentation for instructions.
Additional documentation
The source code of FreeCAD is very extensive, and with CMake it's possible to configure many options. Learning to use CMake fully may be useful to choose the right options for your particular needs.
- CMake Reference Documentation by Kitware.
- How to Build a CMake-Based Project (blog) by Preshing on programming.
- Learn CMake's Scripting Language in 15 Minutes (blog) by Preshing on programming.
Making a debian package
If you plan to build a Debian package out of the sources you need to install certain packages first:
sudo apt install dh-make devscripts lintian
Go to the FreeCAD directory and call
debuild
Once the package is built, you can use lintian
to check if the package contains errors
lintian freecad-package.deb
*.deb package with checkinstall
The Debian script checkinstall
allows to create a *.deb package that can be installed and removed with the standard dpkg
commands. It may need to be installed first (on Ubuntu use sudo apt install checkinstall
). It's interactive and asks for the required information providing helpful defaults. During the process the package is installed and a *.deb file and a backup archive are created.
It's a good idea to define a name and a short description for the package. The name must be entered to uninstall it again and the desription will be listed by dpkg -l
. The default name "build" is not very informative.
Example:
cd freecad-source/build
cmake ..
make
sudo checkinstall # e.g. name=freecad-test1
The result is a *.deb file in the build folder. checkinstall
will install the build by default. This is how you can install or uninstall it:
cd freecad-source/build
ls | grep freecad
freecad-test1_20220814-1_amd64.deb
sudo dpkg -i freecad-test1_20220814-1_amd64.deb # install
dkpg -l | grep freecad # find by name
sudo dpkg -r freecad-test1 # uninstall by name
Updating the source code
The CMake system allows you to intelligently update the source code, and only recompile what has changed, making subsequent compilations faster.
Move to the location where the FreeCAD source code was first downloaded, and pull the new code:
cd freecad-source
git pull
Then move into the build directory where the code was compiled initially, and run cmake
specifying the present directory (denoted by a dot); then trigger the re-compilation with make
.
cd ../freecad-build
cmake .
make -j$(nproc --ignore=2)
Uninstalling the source code
In case the compiled source code was installed with sudo make install
(for Debian) the files were copied to the /usr/local folder into several subfolders. For uninstallation the file install_manifest.txt can be used. It has been created into the build folder during compilation and contains all installed files. As long as this file exists, the installation can be uninstalled.
cd freecad-source/freecad-build
xargs sudo rm < install_manifest.txt
Troubleshooting
For 64 bit systems
When building FreeCAD for 64-bit there is a known issue with the OpenCASCADE (OCCT) 64-bit package. To get FreeCAD running properly you might need to run the configure
script and set additional CXXFLAGS
:
./configure CXXFLAGS="-D_OCC64"
For Debian based systems this option is not needed when using the pre-built OpenCASCADE packages because these ones set the proper CXXFLAGS
internally.
Automatic build scripts
Here is all what you need for a complete build of FreeCAD. It's a one-script-approach and works on a freshly installed Linux distribution. The commands will ask for the root password for installation of packages and new online repositories. These scripts should run on 32 and 64 bit versions. They are written for different versions, but are also likely to run on a later version with or without major changes.
If you have such a script for your preferred distribution, please discuss it on the FreeCAD forum so we can incorporate it.
Ubuntu
These scripts provide a reliable way to install the correct set of dependencies required to build and run FreeCAD on Ubuntu. They make use of the Ubuntu personal package archives (PPA), and should work on any version of Ubuntu targeted by the PPA. The freecad-daily PPA targets recent versions of Ubuntu, while the freecad-stable PPA targets officially supported versions of Ubuntu.
This script installs the daily compiled snapshot of FreeCAD and its dependencies. It adds the daily repository, gets the dependencies to build this version, and installs the required packages. Afterwards it proceeds to pull the source code into a particular directory, creates a build directory and changes into it, configures the compilation environment with cmake
, and finally builds the entire program with make
. Save the script to a file, make it executable, and run it, but don't use sudo
; superuser privileges will be asked only for selected commands.
#!/bin/sh
sudo add-apt-repository --enable-source ppa:freecad-maintainers/freecad-daily && sudo apt-get update
sudo apt-get build-dep freecad-daily
sudo apt-get install freecad-daily
git clone --recurse-submodules https://github.com/FreeCAD/FreeCAD.git freecad-source
mkdir freecad-build
cd freecad-build
cmake -DPYTHON_EXECUTABLE=/usr/bin/python3 -DFREECAD_USE_PYBIND11=ON ../freecad-source
make -j$(nproc --ignore=2)
If you wish, you can uninstall the pre-compiled version of FreeCAD (freecad-daily
) while leaving the dependencies in place, however, leaving this package installed will allow the package manager to keep its dependencies up to date as well; this is mostly useful if you intend to follow the development of FreeCAD, and constantly update and compile the sources from the Git repository.
The previous script assumes that you want to compile the latest version of FreeCAD, so you are using the "daily" repository to get the dependencies. However, you can instead get the build dependencies of the "stable" version for your current Ubuntu release. If this is the case, replace the top part of the previous script with the following instructions. For Ubuntu 12.04, omit --enable-source
from the command.
#!/bin/sh
sudo add-apt-repository --enable-source ppa:freecad-maintainers/freecad-stable && sudo apt-get update
sudo apt-get build-dep freecad
sudo apt-get install libqt5xmlpatterns5-dev # Needed for 0.20; should go away on next packaging update
sudo apt-get install freecad
Once you install the freecad
package from the freecad-stable
repository, it will supersede the FreeCAD executable that is available from the Universe Ubuntu repository. The executable will be named simply freecad
, and not freecad-stable
.
openSUSE
No external Repositories are needed to compile FreeCAD. However, there is an imcompatability with python3-devel which needs to be removed. FreeCAD can be compiled from GIT
# install needed packages for development
sudo zypper install gcc cmake OpenCASCADE-devel libXerces-c-devel \
python-devel libqt4-devel python-qt4 Coin-devel SoQt-devel boost-devel \
libode-devel libQtWebKit-devel libeigen3-devel gcc-fortran git swig
# create new dir, and go into it
mkdir FreeCAD-Compiled
cd FreeCAD-Compiled
# get the source
git clone --recurse-submodules https://github.com/FreeCAD/FreeCAD.git free-cad
# Now you will have a subfolder in this location called free-cad. It contains the source
# make another dir for compilation, and go into it
mkdir FreeCAD-Build1
cd FreeCAD-Build1
# build configuration
cmake ../free-cad
# build FreeCAD
make
# test FreeCAD
cd bin
./FreeCAD -t 0
Since you are using git, next time you wish to compile you do not have to clone everything, just pull from git and compile once more
# go into free-cad dir created earlier
cd free-cad
# pull
git pull
# get back to previous dir
cd ..
# Now repeat last few steps from before.
# make another dir for compilation, and go into it
mkdir FreeCAD-Build2
cd FreeCAD-Build2
# build configuration
cmake ../free-cad
# build FreeCAD
# Note: to speed up build use all CPU cores: make -j$(nproc)
make
# test FreeCAD
cd bin
./FreeCAD -t 0
Debian Squeeze
# get the needed tools and libs
sudo apt-get install build-essential python libcoin60-dev libsoqt4-dev \
libxerces-c2-dev libboost-dev libboost-date-time-dev libboost-filesystem-dev \
libboost-graph-dev libboost-iostreams-dev libboost-program-options-dev \
libboost-serialization-dev libboost-signals-dev libboost-regex-dev \
libqt4-dev qt4-dev-tools python2.5-dev \
libsimage-dev libopencascade-dev \
libsoqt4-dev libode-dev subversion cmake libeigen2-dev python-pivy \
libtool autotools-dev automake gfortran
# checkout the latest source
git clone --recurse-submodules https://github.com/FreeCAD/FreeCAD.git freecad
# go to source dir
cd freecad
# build configuration
cmake .
# build FreeCAD
# Note: to speed up build use all CPU cores: make -j$(nproc)
make
# test FreeCAD
cd bin
./FreeCAD -t 0
Fedora 27/28/29
Posted by user [PrzemoF] in the forum.
#!/bin/bash
ARCH=$(arch)
MAIN_DIR=FreeCAD
BUILD_DIR=build
#FEDORA_VERSION=27
#FEDORA_VERSION=28
FEDORA_VERSION=29
PACKAGES="gcc cmake gcc-c++ boost-devel zlib-devel swig eigen3 qt-devel \
shiboken shiboken-devel pyside-tools python-pyside python-pyside-devel xerces-c \
xerces-c-devel OCE-devel smesh graphviz python-pivy python-matplotlib tbb-devel \
freeimage-devel Coin3 Coin3-devel med-devel vtk-devel"
FEDORA_29_PACKAGES="boost-python2 boost-python3 boost-python2-devel boost-python3-devel"
if [ "$FEDORA_VERSION" = "29" ]; then
PACKAGES="$PACKAGES $FEDORA_29_PACKAGES"
fi
echo "Installing packages required to build FreeCAD"
sudo dnf -y install $PACKAGES
cd ~
mkdir $MAIN_DIR || { echo "~/$MAIN_DIR already exist. Quitting.."; exit; }
cd $MAIN_DIR
git clone --recurse-submodules https://github.com/FreeCAD/FreeCAD.git
mkdir $BUILD_DIR || { echo "~/$BUILD_DIR already exist. Quitting.."; exit; }
cd $BUILD_DIR
cmake ../FreeCAD
make -j$(nproc)
Arch using AUR
Arch User Repository (AUR) is a collection user made recipes to build packages which are not officially supported by distribution maintainers / community. They are usually safe. You can see who maintain the package and for how long he did. It is recommended to check construction files. Also non open source software are available in this area even if maintained by the official owning company.
Prerequisite : git
Steps :
- Open a terminal. Optionally create a directory eg.
mkdir git
. Optionally change directory eg.cd git
. - Clone the AUR repository :
git clone https://aur.archlinux.org/freecad-git.git
- Enter AUR repository folder :
cd freecad-git
- Compile using Arch makepkg :
makepkg -s
. The -s or --syncdeps flag will also install required dependencies. - Install created package :
makepkg --install
or double click on the pkgname-pkgver.pkg.tar.xz inside your file browser.
To update FreeCAD to latest build just repeat from step 3. Update AUR repository when there is some breaking change in the recipe or new features using git checkout -f
inside the folder.
![](/images/thumb/9/94/User_hub.png/24px-User_hub.png)
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub