CAM ToolController: Difference between revisions

From FreeCAD Documentation
(Docnav + General formatting.)
(Marked this version for translation)
Line 3: Line 3:
<translate>
<translate>


<!--T:8-->
{{Docnav
{{Docnav
|[[Path_ToolBit_Library|ToolBit_Library]]
|[[Path_ToolBit_Library|ToolBit_Library]]
Line 16: Line 17:
<translate>
<translate>


== Description ==
== Description == <!--T:9-->


<!--T:1-->
<!--T:1-->
Line 43: Line 44:




<!--T:10-->
{{Docnav
{{Docnav
|[[Path_ToolBit_Library|ToolBit_Library]]
|[[Path_ToolBit_Library|ToolBit_Library]]

Revision as of 10:49, 20 August 2021

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Description

A tool controller carries properties for how a tool should be used in one or more operations.

For example a tool, like a 1/4 inch cutter can run at many different spindle speeds and feed rates. The same tool might be used in different ways in the same job.

properties:

feed speed (h) feed speed (v)

rapid speed (h) rapid speed (v)

Spindle Speed (rpm) Spindle direction (forward/reverse)

Tool Number


Template:Path Tools navi