CAM Fixation

From FreeCAD Documentation
Revision as of 18:04, 18 January 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Path Fixture

Emplacement du menu
Path → Partial Commands → Fixture
Ateliers
Path
Raccourci par défaut
P,F
Introduit dans la version
-
Voir aussi
Aucun

Description

Cet outil définit un point de fixation (G53-G59) pour les opérations suivantes.

Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-Code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:

  • G53 -> Machine coordinate system.
  • G54 -> Scratchpad coordinate system.
  • G55 to G59 -> Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.
  • G59 allows extension from G59.1 to G59.255 on many CNC Controllers.

Utilisation

  1. Pressez le bouton Fixation
  2. Définit le point de fixation souhaité

Propriétés

  • DonnéesFixture: Définit le point de fixation courant
  • DonnéesActive: Définit si cette commande est active ou non lors de l'ajoût dans un composé