CAM Fixture/fr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 10: Line 10:
*G53 -> Machine coordinate system.
*G53 -> Machine coordinate system.
*G54 -> Scratchpad coordinate system.
*G54 -> Scratchpad coordinate system.
*G55 to G59 -> Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.
*G55 to G59.9 -> Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.

*G59 allows extension from G59.1 to G59.255 on many CNC Controllers.
The G59 Fixture is used to expand available fixtures. The degree of expansion implemented is CNC machine specific, and this command allows provides for G59.1 to G59.9.


== Utilisation ==
== Utilisation ==

Revision as of 22:25, 25 January 2018

Path Fixture

Emplacement du menu
Path → Partial Commands → Fixture
Ateliers
Path
Raccourci par défaut
P,F
Introduit dans la version
-
Voir aussi
Aucun

Description

Cet outil définit un point de fixation (G53-G59) pour les opérations suivantes.

Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-Code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:

  • G53 -> Machine coordinate system.
  • G54 -> Scratchpad coordinate system.
  • G55 to G59.9 -> Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.

The G59 Fixture is used to expand available fixtures. The degree of expansion implemented is CNC machine specific, and this command allows provides for G59.1 to G59.9.

Utilisation

  1. Pressez le bouton Fixation
  2. Définit le point de fixation souhaité

Propriétés

  • DonnéesFixture: Définit le point de fixation courant
  • DonnéesActive: Définit si cette commande est active ou non lors de l'ajoût dans un composé