CAM Fixture/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "* {{PropertyData|Fixture}}: Définit le point de fixation courant * {{PropertyData|Active}}: Définit si cette commande est active ou non lors de l'ajoût dans un composé")
(Updating to match new version of source page)
Line 3: Line 3:
== Description ==
== Description ==


<div class="mw-translate-fuzzy">
Cet outil définit un point de fixation (G53-G59) pour les opérations suivantes.
Cet outil définit un point de fixation (G53-G59) pour les opérations suivantes.
</div>

Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-Code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:
*G53 -> Machine coordinate system.
*G54 -> Scratchpad coordinate system.
*G55 to G59 -> Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.
*G59 allows extension from G59.1 to G59.255 on many CNC Controllers.


== Utilisation ==
== Utilisation ==


<div class="mw-translate-fuzzy">
# Pressez le bouton {{KEY|[[Image:Path Fixture.png|16px]] [[Path Fixture|Fixation]]}}
# Pressez le bouton {{KEY|[[Image:Path Fixture.png|16px]] [[Path Fixture|Fixation]]}}
# Définit le point de fixation souhaité
# Définit le point de fixation souhaité
</div>


== Propriétés ==
== Propriétés ==

Revision as of 18:04, 18 January 2018

Path Fixture

Emplacement du menu
Path → Partial Commands → Fixture
Ateliers
Path
Raccourci par défaut
P,F
Introduit dans la version
-
Voir aussi
Aucun

Description

Cet outil définit un point de fixation (G53-G59) pour les opérations suivantes.

Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-Code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:

  • G53 -> Machine coordinate system.
  • G54 -> Scratchpad coordinate system.
  • G55 to G59 -> Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.
  • G59 allows extension from G59.1 to G59.255 on many CNC Controllers.

Utilisation

  1. Pressez le bouton Fixation
  2. Définit le point de fixation souhaité

Propriétés

  • DonnéesFixture: Définit le point de fixation courant
  • DonnéesActive: Définit si cette commande est active ou non lors de l'ajoût dans un composé