CAM Fixture/es: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 10: Line 10:
*G53 -> Machine coordinate system.
*G53 -> Machine coordinate system.
*G54 -> Scratchpad coordinate system.
*G54 -> Scratchpad coordinate system.
*G55 to G59 -> Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.
*G55 to G59.9 -> Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.

*G59 allows extension from G59.1 to G59.255 on many CNC Controllers.
The G59 Fixture is used to expand available fixtures. The degree of expansion implemented is CNC machine specific, and this command allows provides for G59.1 to G59.9.


==Utilización==
==Utilización==

Revision as of 22:25, 25 January 2018

Fixtura de trayectoria

Menu location
Trayectoria → Comandos Parciales → Fixtura
Workbenches
Trayectoria
Default shortcut
P,F
Introduced in version
-
See also
None

Descripción

Esta herramienta coloca un punto de fixtura (G53-G59) para las siguientes operaciones

Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-Code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:

  • G53 -> Machine coordinate system.
  • G54 -> Scratchpad coordinate system.
  • G55 to G59.9 -> Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.

The G59 Fixture is used to expand available fixtures. The degree of expansion implemented is CNC machine specific, and this command allows provides for G59.1 to G59.9.

Utilización

  1. Presiona el boton Fixtura
  2. Coloca la fixtura deseada

Propiedades

  • DatosFixtura: Coloca el actual punto como fixtura
  • DatosActivar: Define si este comando esta activo o no cuando es introducido a un compuesto.