CAM DressupDogbone/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "# Selectați un contur sau profil de traiectorie Path objects # Click pe articolul din meniu 16px Path DressupDogbone|Dogbone...")
(Created page with "== Opţiuni ==")
Line 11: Line 11:
# Click pe articolul din meniu [[Image:Path Dressup.png|16px]] [[Path DressupDogbone|Dogbone Dress-up]]
# Click pe articolul din meniu [[Image:Path Dressup.png|16px]] [[Path DressupDogbone|Dogbone Dress-up]]


==Options==
== Opţiuni ==


*Side - Which side of the path the modification will be added to.
*Side - Which side of the path the modification will be added to.

Revision as of 11:41, 5 November 2018

Path DressupTag

Menu location
Path → Path Dressup → Dogbone Dress-up
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also
Path_DressupTag, Path_DressupRampEntry, Path_DressupDragKnife

Descriere

Acest instrument îmbracă o traiectorie existentă în a derula colțurile în unghiuri interioare ale unei operații de profilare sau de contur. O freză cilindrică nu poate să se taie complet în colțul ascuțit, fără a se ciocni cu modelul. În anumite cazuri, ar putea fi preferabil să încălcați modelul și să vă asigurați că materialul din colț este îndepărtat. Acest lucru este necesar în special dacă părțile se vor intersecta / interconecta unele cu altele.

Utilizare

  1. Selectați un contur sau profil de traiectorie Path objects
  2. Click pe articolul din meniu Dogbone Dress-up

Opţiuni

  • Side - Which side of the path the modification will be added to.
  • Style - Style of overcut (Dogbone, T-Bone Horizontal, T-Bone Vertical, T-Bone Long Edge, T-Bone Short Edge).
  • incision - The Algorithm to use calculating the overcut length
  • Custom- If Incision is custom, the custom property is used to set the length.

Limitations

The dogbone dressup needs a straight path segement (G1) before and after the corner where the dressup should be inserted.