Path Vestizione osso di cane

From FreeCAD Documentation
Revision as of 22:36, 12 March 2018 by Renatorivo (talk | contribs) (Created page with "==Descrizione==")

Vestizione Osso di cane

Posizione nel menu
Path → Vestizione → Osso di cane
Ambiente
Path
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Tag di vestizione, Rampa di ingresso, Trascina lama

Descrizione

This tool dresses up an existing path to overcut corners on inside angles of a profile or contour operation. A cylindrical cutter cannot cut all the way into an acute corner without colliding with the model. In certain cases, it may be preferable to violate the model and ensure that the material at the corner is removed. This is especially necessary if parts are going to intersect/interlock with each other.

Usage

  1. Select a contour or profile path Path objects
  2. click the Dogbone Dress-up menu item

Options

  • Side - Which side of the path the modification will be added to.
  • Style - Style of overcut (Dogbone, T-Bone Horizontal, T-Bone Vertical, T-Bone Long Edge, T-Bone Short Edge).
  • incision - The Algorithm to use calculating the overcut length
  • Custom- If Incision is custom, the custom property is used to set the length.