Basic Sketcher Tutorial/it: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 36: Line 36:
# Selezionare [[Image:Sketcher_Line.png|32px]] [[Sketcher_Line/it|Linea da 2 punti]]
# Selezionare [[Image:Sketcher_Line.png|32px]] [[Sketcher_Line/it|Linea da 2 punti]]
# Nello schizzo avvicinare il cursore al '''punto di origine''' , il punto viene evidenziato e vicino al cursore appare questa icona[[Image:Constraint_PointOnPoint.png|32px]].
# Nello schizzo avvicinare il cursore al '''punto di origine''' , il punto viene evidenziato e vicino al cursore appare questa icona[[Image:Constraint_PointOnPoint.png|32px]].
# Selezionare il punto e estendere una linea diagonale fino ad una lunghezza arbitraria.
# Selezionare il punto e estendere una linea in diagonale fino ad una lunghezza arbitraria.
# Ripetere questa procedura fino a creare cinque '''linee di costruzione'''. Accertarsi che siano tutte in diagonale.
# Ripetere questa procedura fino a creare cinque '''linee di costruzione'''. Accertarsi che siano tutte in diagonale.
# Per uscire dalla modalità di costruzione, è sufficiente cliccare nuovamente su [[Image:Sketcher_ToggleConstruction.png|32px]] [[Sketcher_ToggleConstruction/it|Costruzione]]
# Per uscire dalla modalità di costruzione, è sufficiente cliccare nuovamente su [[Image:Sketcher_ToggleConstruction.png|32px]] [[Sketcher_ToggleConstruction/it|Costruzione]]

Revision as of 22:16, 28 October 2015

Tutorial
Argomento
{{{Topic}}}
Livello di difficoltà
Base
Tempo di esecuzione
10 minuti
Autori
Drei
Versione di FreeCAD
0.16 o superiore
Files di esempio
Vedere anche
Nessuno

Introduzione

Questo tutorial ha lo scopo di introdurre il lettore al flusso di lavoro di base dell'ambiente Schizzo.

L'ambiente Sketcher esiste come modulo autonomo, ma è accessibile anche dall'ambiente PartDesign quando è necessario per creare un profilo.

Requisiti

  • FreeCAD versione 0.16 o superiore

Procedura

Creare uno Schizzo

  1. Creare un nuovo documento
  2. Passare nell'ambiente Sketcher
  3. Selezionare Nuovo schizzo

Ora siamo all'interno dell'ambiente Sketcher. Al suo interno, siamo in grado di utilizzare la maggior parte degli strumenti disponibili in questo ambiente.

Nella Vista combinata, espandere le opzioni Edit controls e abilitare gli Autovincoli.

Creare la geometria

La geometria di costruzione dello schizzo

La geometria di costruzione viene utilizzata come guida per creare dei profili complessi. Per accedervi, è necessario attivare la modalità Costruzione.

  1. Selezionare Construzione
  2. Selezionare Linea da 2 punti
  3. Nello schizzo avvicinare il cursore al punto di origine , il punto viene evidenziato e vicino al cursore appare questa icona.
  4. Selezionare il punto e estendere una linea in diagonale fino ad una lunghezza arbitraria.
  5. Ripetere questa procedura fino a creare cinque linee di costruzione. Accertarsi che siano tutte in diagonale.
  6. Per uscire dalla modalità di costruzione, è sufficiente cliccare nuovamente su Costruzione
La geometria dello schizzo

La geometria dello schizzo viene utilizzata per creare i profili chiusi necessari per eseguire le operazioni 3D nell'ambiente PartDesign.

  1. Selezionare Cerchio
  2. Posizionare il suo centerpoint nell'origine dello schizzo.
  3. Estendere la circonferenza per una lunghezza arbitraria.


  1. Select Arc
  2. Approach the endpoint of one of the construction lines.
  3. Set the centerpoint' of the arc to be coincident with the endpoint.
  4. Select an arbitrary location of your cursor to be set as the beginning of the arc, by clicking once.
  5. Extend the arc an arbitrary amount, making sure the circumference opens outward (the empty space is facing towards the circle you created earlier).
  6. Repeat these steps for each construction line.


  1. Create an arc between each pair of the previous arcs, with their circumference pointing towards the circle.

We have now created the basic elements for our profile.

External Geometry

When a 3D element has been created it is possible to create references to it within a sketch.

  1. Select External Geometry.
  2. Approach the element that you wish to reference, the edge of a Pad for example.
  3. Click on it
  4. New elements of a different color should appear on the sketch in the location of the feature you wish to reference.


Constraints

Constraints are used to constrain the Degrees of Freedom of points and curves within sketcher.

Geometric Constraints

They are used to establish relations between points and curves without the use of dimensions.

  1. Select all five construction lines.
  2. Select Equal Length


  1. Select all five arcs centered on an endpoint of a line.
  2. Select Equal Length
  3. Repeat for all five arcs that are not centered on an endpoint.


  1. Select the construction line that is closest to the vertical axis.
  2. Select Vertical


  1. Select the endpoint of an arc and the endpoint closest to it.
  2. Select Tangent
  3. Repeat for each endpoint, until a closed profile is created.

As of this step, we have now created a closed profile that can be adjusted with the desired dimensions.


Datum Constraints

These are used to specify the distance between points in a particular direction and the dimensions of curves.

  1. Select the vertically constrained construction line.
  2. Select Vertical Distance
  3. Set the length to 30 mm.


  1. Select the vertical construction line and the line closest to it
  2. Select Internal Angle
  3. Set the angle to 72°
  4. Repeat the same procedure for each pair of adjacent lines.


  1. Select one of the arcs centered on the endpoint of a line.
  2. Select Radius
  3. Set the radius to 8 mm.
  4. Do the same for an arc not centered on an endpoint. Set the radius to 11 mm.
  5. Set the center circle radius to 10 mm.

You should end up with a fully constrained sketch. It can be comfirmed by noticing the change in color of all curves.

We are now finished with the basic workflow for the Sketcher Module.

Further Reading