Macro Rotate To Point
Description |
---|
Updated version of macro modified the GUI to improve HiDPI support (QGridLayout). Run only FC v0.18 or higher (supporting Qt5 and PySide2) Macro for rotate an object on itself with the axis of rotation the: boundbox center, center of mass, direction of wire, or last point clicked. You must save in a file all coordinate worked and save it in a file "Coordinate [(0.06,1.30,0.0),(85.0,0.0,0.0)]," or in a complete macro for create one animation For the previous version (Qt4) see Macro_Rotate_To_Point and install it manually. Macro version: 00.10 Last modified: 2021/03/08 FreeCAD version: 0.19 Download: ToolBar Icon Author: Mario52 |
Author |
Mario52 |
Download |
ToolBar Icon |
Links |
Macros recipes How to install macros How to customize toolbars |
Macro Version |
00.10 |
Date last modified |
2021/03/08 |
FreeCAD Version(s) |
0.19 |
Default shortcut |
None |
See also |
None |
Description
Macro to rotate an object on itself with the axis of rotation being either the:
- boundbox center
- center of mass
- direction of wire
- last point clicked
Usage
- Download the macro from the Addon Manager
- Execute the macro
- Select one object
- Choose one of the following orientations:
Point Rotation
- Boundbox Center: Select the BoundBox center to axis rotation
- Center of Mass: Select the Center of Mass to axis rotation
- Point Clicked: Select the last mouse click as the point for axis rotation
- 1: select the object
- 2: use the CTRL key to choose an extra object
Axis Rotation
- Rotation(Z) Yaw: Yaw axis
- Rotation(Y) Pitch: Pitch axis
- Rotation(X) Roll: Roll axis
- Rotation(D) Direction: Rotate around line, wire selected
Coordinates Point clicked
- DoubleSpinBox: Coordinate X on mouse click (modifiable only with the mode "Point Clicked")
- DoubleSpinBox: Coordinate Y on mouse click (modifiable only with the mode "Point Clicked")
- DoubleSpinBox: Coordinate Z on mouse click (modifiable only with the mode "Point Clicked")
Work
- Translation: If this checkBox is checked the rotation is disabled, the object placement is done on the axis selected.
- Point: One point is created for visualise the point rotation axis: red X, green Y, blue Z
- Line Edit: The line edit displays the original coordinate to axis selected + the input data given in the spinBox
- 0,0000 : Enter the modification
- Apply: Apply the modification to the object
- The coordinate is displayed
Data
- Window for display the coordinates memorized
- Save: Save the data in file
- Clear: Delete and clean the text editor
- Delete: Delete the selected line
- Memorize: Memorize and display the coordinate
- Macro:
- Mode normal Macro the coordinate is saved in this mode : [(0.06,1.30,0.0),(85.0,0.0,0.0)],
- Mode macro 0,0 Coordinate the coordinate is saved (one object or many objects worked) in a complete macro directly in your macros directory with the same name of the document extension .FCMacro
- Options of the macro
- __pompe____engrenage__ : Name of document
- __22 Coordinates__ : number of coordinates
- Type Key Q to Quit : Quit the macro
- Type Key D to Decrease speed : Decrease the speed of the animation
- Type Key I to Increase speed : Increase the speed of the animation
- Type Key P to Pause/Continue or key RETURN or ESCAPE : Pause / Anime
- Type Key S to Step by Step (key RETURN or ESCAPE to continue) : Step by Step
- Type Key R to reverse
- Type Key M for this message : Display this memo
- ____________________________
- Memo on Click:
Command
- Quit: Quit the macro
- Original: After modifying the data of the object you can return to the original placement, If you have not deselected the current object.
- 0,0,0 : This option places the object in base coordinate
0, 0, 0
- Reset: Reset the data in the macro and deselect the current object (same mouse click in the 3D view)
Script
Macro_Rotate_To_Point.FCMacro
# -*- coding: utf-8 -*- from __future__ import unicode_literals """ *************************************************************************** * Copyright (c) 2017 2018 2019 2020 2021 <mario52> * * * * This file is a supplement to the FreeCAD CAx development system. * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU Lesser General Public License (LGPL) * * as published by the Free Software Foundation; either version 2 of * * the License, or (at your option) any later version. * * for detail see the LICENCE text file. * ** ** * Use at your own risk. The author assumes no liability for data loss. * * It is advised to backup your data frequently. * * If you do not trust the software do not use it. * ** ** * * * This software is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU Library General Public License for more details. * * * * You should have received a copy of the GNU Library General Public * * License along with this macro; if not, write to the Free Software * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * * USA * *************************************************************************** * WARNING! All changes in this file will be lost and * * may cause malfunction of the program * *************************************************************************** """ # # #OS: Windows 10 (10.0) #Word size of OS: 64-bit #Word size of FreeCAD: 64-bit #Version: 0.19.24219 (Git) #Build type: Release #Branch: master #Hash: 8c26baebab320b8c1c3279bc8eb34a1eb6c7a363 #Python version: 3.6.8 #Qt version: 5.12.1 #Coin version: 4.0.0a #OCC version: 7.3.0 #Locale: French/Mars (fr_Ma) # # __title__ = "Rotate_To_Point" __author__ = "Mario52" __url__ = "https://www.freecadweb.org/" __Wiki__ = "https://www.freecadweb.org/wiki/Macro_Rotate_To_Point" __version__ = "00.10" __date__ = "2021/03/08" #YYYY/MM/DD # # import PySide2 from PySide2 import (QtWidgets, QtCore, QtGui) from PySide2.QtWidgets import * from PySide2.QtCore import * from PySide2.QtGui import * from PySide2.QtWidgets import QComboBox #from PySide2.QtWidgets import (QWidget, QApplication, QSlider, QGraphicsView, QGraphicsScene, QVBoxLayout, QStyle, QListWidget) #from PySide2.QtCore import QDate #from PySide2.QtGui import (QPainter, QColor, QIcon, QBrush, QPalette) from PySide2.QtSvg import * import unicodedata import re import operator from operator import itemgetter, attrgetter, methodcaller # pour sort import Draft, Part, PartGui, FreeCADGui, FreeCAD from FreeCAD import Base import DraftVecUtils import time, os Gui = FreeCADGui App = FreeCAD global ui ; ui = "" global sourisPass ; sourisPass = 0 global positionMouse ; positionMouse = "" global selM ; selM = "" global originalObject; originalObject = "" global myObject ; myObject = "" global myObjectName ; myObjectName = "" global originalPlacement; originalPlacement = "" global valeur ; valeur = 0.0 global axisX ; axisX = 0.0 global axisY ; axisY = 0.0 global axisZ ; axisZ = 0.0 global posX ; posX = 0.0 global posY ; posY = 0.0 global posZ ; posZ = 0.0 global rotAngleX ; rotAngleX = 0.0 global rotAngleY ; rotAngleY = 0.0 global rotAngleZ ; rotAngleZ = 0.0 global saveOnDisk ; saveOnDisk = [] global saveListView ; saveListView = "" global memorySelected; memorySelected = [] global countMemory ; countMemory = 0 global duplicate_Memory ;duplicate_Memory = [] global duplicate_View; duplicate_View = [] global s ; s = "" ##path########################################################################### global path, path2 # #path = FreeCAD.ConfigGet("AppHomePath") # path FreeCAD installation #path = FreeCAD.ConfigGet("UserAppData") # path FreeCAD User data #path = "your path" # your directory path param = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macro")# macro path path = param.GetString("MacroPath","") + "/" # macro path path = path.replace("\\","/") # convert the "\" to "/" #print( "Path for the icons : " , path ) # ################################################################################# global pathFile #### Configuration begin ############################################################## pathFile = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__ ).GetString("setLastPath") if pathFile == "": pathFile = path FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetString("setLastPath",pathFile) #### FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetString("Version",__version__ + " (" + __date__ + ")") global switchZoomOnCilck switchZoomOnCilck = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetBool("switchZoomOnCilck") if switchZoomOnCilck == 0: FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetBool("switchZoomOnCilck", switchZoomOnCilck) #### Configuration end ############################################################## #### wiki help page #### import WebGui #def on_PB_Help(self): # # WebGui.openBrowser("http://www.freecadweb.org/wiki/index.php?title=xxxx") # App.Console.PrintMessage("http://www.freecadweb.org/wiki/index.php?title=xxxx" + "\n") #### wiki help page #### global switchVersionMacroSearch#; switchVersionMacroSearch = False try: def versionSearch(): import urllib import requests contentPage = requests.get("https://wiki.freecadweb.org/Macro_" + __title__).text for i in contentPage.split("\n"): # list page to line if "ctEven macro-version" in i: versionDetect = (i.split(">")[1]) if "ctEven macro-date" in i: dateDetect = (i.split(">")[1]) try: if (len(versionDetect) != 0) and (len(dateDetect) != 0): break except Exception: None try: if (versionDetect == __version__) and (dateDetect == __date__): None else: msg = ("New version availlable : " + "\n" + str(versionDetect) + ":" + str(dateDetect) + "\n" + "You can install with AddonManager") FreeCAD.Console.PrintMessage("your actual version : " + str(__version__) + " : " + str(__date__) + "\n") FreeCAD.Console.PrintMessage("new version availlable : " + str(versionDetect) + " : " + str(dateDetect) + "\n") diag = QtWidgets.QMessageBox(QtWidgets.QMessageBox.Information, 'New Version', msg) diag.setWindowModality(QtCore.Qt.ApplicationModal) diag.exec_() except Exception: None return versionDetect, dateDetect # switchVersionMacroSearch = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetBool("switchVersionMacroSearch") # if switchVersionMacroSearch == 0: # FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetBool("switchVersionMacroSearch", switchVersionMacroSearch) # if switchVersionMacroSearch == True: # versionSearch() except Exception: FreeCAD.Console.PrintMessage("Failed to establish a connection" + "\n") #### Detect version macro ########################################### switchVersionMacroSearch = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).GetBool("switchVersionMacroSearch") if switchVersionMacroSearch == 0: FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetBool("switchVersionMacroSearch", switchVersionMacroSearch) if switchVersionMacroSearch == True: versionSearch() #### Detect version macro ########################################### Quit_Icon = [ "24 24 3 1", " c None", ". c #FFFFFF", "+ c #CC0000", " .... ", "++++++++++....++++++++++", "+.......++....++.......+", "+.......++....++.......+", "+.......++....++.......+", "+...++++++....++++++...+", "+...++++++....++++++...+", "+...+++++......+++++...+", "+...+++++......+++++...+", "+...+++++......+++++...+", "+...+++++......+++++...+", "+...+++++......+++++...+", "+...+++++......+++++...+", "+...++++++++++++++++...+", "+...++++++++++++++++...+", "+...++++++++++++++++...+", "+...++++++++++++++++...+", "+...++++++++++++++++...+", "+...++++++++++++++++...+", "+...++++++++++++++++...+", "+......................+", "+......................+", "+......................+", "++++++++++++++++++++++++" ] boundBox_Center_Icon = [ "24 24 8 1", " c None", ". c #284871", "+ c #234C86", "@ c #314B64", "# c #EF2929", "$ c #4A74A4", "% c #4478AD", "& c #4E9A06", " ", " # ", " # ", " # ", " &&&&&# ", " & #&&&&&&& ", " & +#.. && ", " &&&&&+%#%%. & & ", " & ++&&&&&&& & ", " & +$$$$$$&+@ & ", " & +%$$$$$$&+@ & ", "####&###$$$$$+&+####### ", " & +%$$$$++&+@ & ", " & +%$$$+++&+@ & ", " & +$$++++&@ & ", " & ++++++&@ & ", " & @@@@@& & ", " & # & & ", " &&&&& # &&& ", " &&&&&& ", " # ", " # ", " # ", " " ] centerMass_Icon = [ "24 24 9 1", " c None", ". c #000100", "+ c #CD0000", "@ c #6B6014", "# c #B0A22C", "$ c #D5B716", "% c #E9D235", "& c #F7E66C", "* c #FBF4BC", " ", " ", " ", " ", " ...... ", " ..#%%%%#.. ", " .@&&&%%%%%@. ", " .@&**&%%%%%%@. ", " .&***&%%%%%%%. ", " .#&**&%%+%%%%%#. ", " .%&&&%%++%%%$$%. ", " .%%%%+++++$$$$$. ", " .%%%%%+++++$$$$. ", " .%%%%$$++$$$$$$. ", " .#%$$$$+$$$$$$#. ", " .%$$$$$$$$$$%. ", " .@%$$$$$$$$$@. ", " .@%$$$$$$%@. ", " ..#$$$$#.. ", " ...... ", " ", " ", " ", " " ] point_Clicked_Icon = [ "24 24 7 1", " c None", ". c #730000", "+ c #9F0000", "@ c #E90000", "# c #C39F03", "$ c #ECD309", "% c #FBE851", " ", " ##### ", " #%%%%%# ", " #%%%%%%$# ", " #%%%%%$$$$# ", " #%%%%$$$$$# ", " #%%%+.$$$$# ", " #%%%++.$$$# ", " #%%+@+.$# ", " #%%+@@+.# ", " ##+@@@+. ", " +@@@@+. ", " +@@@@@+. ", " +@@@@@@+. ", " +@@@@@@@.. ", " +@@@@@@@@.. ", " +@@@@@@@@@.. ", " +@@@@@@+.... ", " +@@@@@+ ", " +@@++@@. ", " +@+. .@@. ", " ++. .@. ", " .+.. ", " .. " ] axis_X_Icon = [ "24 24 6 1", " c None", ". c #000000", "+ c #A40000", "@ c #EE2A2A", "# c #729FCF", "$ c #B9BCB5", " $$ $$$$ ", " $$$$ $ $ ", " $$$$$$ $ ", " $$$$$$ $ ", " $$$$$$$$ $$$ ", " $$$$ ", " $$$$ ", " $$$$ ", " $$$$ ", " $$$$ $$ $$", " $$##$$ $$ $$", " . . $####$ $$$ ", " ... +####$ $$ ", " .. +@####$$ $ ", " . ... +@@@+$$$$$ $$ ", " +@@@+ $$$$$ ", " +@@@+ $$$$$ ", " +++@@@+ $$$$$$$ ", " +@@@@+ $$$$$$ ", " +@@@+ $$$$$ ", " +++++ $$$$$ ", " ", " ", " " ] axis_Y_Icon = [ "24 24 7 1", " c None", ". c #030303", "+ c #4E9A06", "@ c #729FCF", "# c #B9BCB5", "$ c #BABDB6", "% c #8AE134", " $$ #### ", " $$$$ # # ", " $$$$$$ # ", " $$$$$$ # ", " $$$$$$$$ ### ", " $$$$ ", " $$$$ ", " $$$$ ", " $$$$ ", " $$$$ .. ..", " $$@@$$ .. ..", " # # $@@@@$ ... ", " ### $@@@@+ .. ", " ## $$@@@@%+ . ", " # ### $$$$$+%%%+ .. ", " $$$$$ +%%%+ ", " $$$$$ +%%%+ ", " $$$$$$$ +%%%+++ ", " $$$$$$ +%%%%+ ", " $$$$$ +%%%+ ", " $$$$$ +++++ ", " ", " ", " " ] axis_Z_Icon = [ "24 24 6 1", " c None", ". c #000000", "+ c #204A87", "@ c #1D89B6", "# c #729FCF", "$ c #B9BCB5", " ++ ... ", " +@@+ . ", " +@@@@+ . ", " +@@@@+ . ", " +++@@+++ ... ", " +@@+ ", " +@@+ ", " +@@+ ", " +@@+ ", " +@@+ $$ $$", " ++##++ $$ $$", " $ $ +####+ $$$ ", " $$$ $####$ $$ ", " $$ $$####$$ $ ", " $ $$$ $$$$$$$$$$ $$ ", " $$$$$ $$$$$ ", " $$$$$ $$$$$ ", " $$$$$$$ $$$$$$$ ", " $$$$$$ $$$$$$ ", " $$$$$ $$$$$ ", " $$$$$ $$$$$ ", " ", " ", " " ] direction_Icon = [ "24 24 6 1", " c None", ". c #000000", "+ c #A40000", "@ c #EE2A2A", "# c #565854", "$ c #729FCF", " ", " ", " +++++ ", " +@@+ ", " +@@@+ ", " +@@@++ ", " +@@@+ + ", " +@@@+ ", " +@@@+ ", " +@@@+ ", " +@@@+ ", " +@@@+ ", " +@@@+ ", " +@@@+ ", " +@@@+ ", " +@@@+ ", " + +@@@+ ", " ++@@@+ ", " +@@@+ ", " +@@+ ", " +++++ ", " ", " ", " " ] point_Icon = [ "24 24 8 1", " c None", ". c #000100", "+ c #B0A22C", "@ c #E9D235", "# c #6B6014", "$ c #F7E66C", "% c #FBF4BC", "& c #D5B716", " ", " ", " ", " ", " ...... ", " ..+@@@@+.. ", " .#$$$@@@@@#. ", " .#$%%$@@@@@@#. ", " .$%%%$@@@@@@@. ", " .+$%%$@@@@@@@@+. ", " .@$$$@@@@@&&&&&. ", " .@@@@@@@&&&&&&&. ", " .@@@@@&&&&&&&&&. ", " .@@@@&&&&&&&&&&. ", " .+@@&&&&&&&&&&+. ", " .@&&&&&&&&&&&. ", " .#&&&&&&&&&&#. ", " .#&&&&&&&&#. ", " ..+&&&&+.. ", " ...... ", " ", " ", " ", " " ] apply_Icon = [ "24 24 3 1", " c None", ". c #4E9A06", "+ c #FFFFFF", " ", " ", " ", " . ", " .+. ", " .+.+. ", " .+...+. ", " .+.....+. ", " . .+.......+.", " .+. .+.......+. ", " .+.+. .+.......+. ", " .+...+. .+.......+. ", " .+.....+.+.......+. ", ".+.......+.......+. ", " .+.............+. ", " .+...........+. ", " .+.........+. ", " .+.......+. ", " .+.....+. ", " .+...+. ", " .+.+. ", " .+. ", " . ", " " ] quit_Icon = [ "24 24 3 1", " c None", ". c #FFFFFF", "+ c #CC0000", " .... ", "++++++++++....++++++++++", "+.......++....++.......+", "+.......++....++.......+", "+.......++....++.......+", "+...++++++....++++++...+", "+...++++++....++++++...+", "+...+++++......+++++...+", "+...+++++......+++++...+", "+...+++++......+++++...+", "+...+++++......+++++...+", "+...+++++......+++++...+", "+...+++++......+++++...+", "+...++++++++++++++++...+", "+...++++++++++++++++...+", "+...++++++++++++++++...+", "+...++++++++++++++++...+", "+...++++++++++++++++...+", "+...++++++++++++++++...+", "+...++++++++++++++++...+", "+......................+", "+......................+", "+......................+", "++++++++++++++++++++++++" ] save_Icon = [ "24 24 9 1", " c None", ". c #A30500", "+ c #5D5F5C", "@ c #3967A0", "# c #4B9A00", "$ c #7E9BBD", "% c #A9ABA8", "& c #C7C9C6", "* c #DCDEDB", " ", " @@@@@ ", " @@$$$$$@ ", " @$$$$$$$@ ", " @@@@@@$@$$@ ", " @$@@@ ", " +%&&&@$@@@@&%%% ", " +*@@@$@@@@@@@@&% ", " +%*@@@@@@@@@@@@*&+ ", " +***@@@@@@@@@@***+ ", " +%***&@@@@@@@@&****+ ", " +****&&@@@@@@&&****+ ", " +***&&&&@@@@&&&&***+ ", " +%***&&&&&@@&&&&&****+ ", " +***&&&&&&&&&&&&&&***+ ", " %********************+ ", " %********************+ ", " %&&&&&&&&&&&&&&&&&&&&+ ", " %&%%%%%%%%%%%%%%%%%%%+ ", " %&%%%%%%%%%%%%%%%%%%%+ ", " %&%&&&%%%%%%%@%%#%%.%+ ", " %%%%%%%%%%%%%%%%%%%%%+ ", " ++++++++++++++++++++++ ", " " ] clear_Icon = [ "24 24 9 1", " c None", ". c #000200", "+ c #8B0606", "@ c #875209", "# c #E3383A", "$ c #C19916", "% c #C4A163", "& c #E2C928", "* c #E4D05A", " @@@ ", " @%%%@ ", " @%*@@ ", " @%@*%@ ", " @%$$%@ ", " @%%$%%@ ", " @%$$$*@ ", " @$**+++ ", " @*%+##+. ", " ++##+*$ ", " +#++****$ ", " ++****&**$ ", " &**&*&&&*$ ", " &*&&&*&$&*$ ", " $*&*&$&&$$*$ ", " $*&$&*$*&*$*$ ", " *&$$&&$&&&&*$ ", " $*&$&**$$**@ ", " $*&$&****&$ ", " $*$***$$@ ", " $***$@ @ ", " $@$@ ", " @ ", " " ] delete_Icon = [ "24 24 3 1", " c None", ". c #A40000", "+ c #EE2A2A", " ", " ", " . . ", " .+. .+. ", " .+++. .+++. ", " .+++++. .+++++. ", " .+++++++. .+++++++. ", " .+++++++.+++++++. ", " .+++++++++++++. ", " .+++++++++++. ", " .+++++++++. ", " .+++++++. ", " .+++++++++. ", " .+++++++++++. ", " .+++++++++++++. ", " .+++++++.+++++++. ", " .+++++++. .+++++++. ", " .+++++. .+++++. ", " .+++. .+++. ", " .+. .+. ", " . . ", " ", " ", " " ] memo_Allume_Icon = [ "24 24 9 1", " c None", ". c #4F514E", "+ c #635D41", "@ c #676966", "# c #848784", "$ c #888A87", "% c #E9D312", "& c #FEEE4D", "* c #FDFFFC", " ", " ", " ", " ", " %%%%%% ", " %%&&&&%% ", " %%&&&&&&%% ", " %%&&&**&&&%% ", " %%&&&****&&&%% ", " %&&&******&&&% ", " %&&&******&&&% ", " %&&&******&&&% ", " %%&&&****&&&%% ", " %%&&&**&&&%% ", " %%&&&&&&%% ", " %%%&&%%% ", " .%%%%+ ", " @..... ", " ..#$$@ ", " @@.... ", " ..$$$@ ", " @@.... ", " $$$$ ", " " ] memo_Eteint_Icon = [ "24 24 9 1", " c None", ". c #000000", "+ c #204A87", "@ c #555753", "# c #4F514E", "$ c #635D41", "% c #676966", "& c #848784", "* c #888A87", " ", " ", " ", " ", " ...... ", " ........ ", " .......... ", " ............ ", " ....+.+.+.+... ", " ...+.+.+.++... ", " ...@......@... ", " ...@......@... ", " ....@....@.... ", " ....@..@.... ", " ...@..@... ", " ..@..@.. ", " #@..@$ ", " %##### ", " ##&**% ", " %%#### ", " ##***% ", " %%#### ", " **** ", " " ] origin_Icon = [ "24 24 14 1", " c None", ". c #EF2929", "+ c #A40000", "@ c #DDDFDC", "# c #888A85", "$ c #DDDEDB", "% c #DCDEDB", "& c #DCDEDC", "* c #DBDDDA", "= c #BABDB6", "- c #555753", "; c #729FCF", "> c #3465A4", ", c #8191AA", " ", " ", " .+ ", " ..++ ", " ....++ ", " .....+++ ", " ....@#++++ ", " ....@@@#++++ ", " ....@@@@@#++++ ", " ....@@@@$@@#++++ ", " ....@@@$@@%@@#++++ ", " ....@@@@@@@@%@@#++++ ", " ...@@@%%%%&%%*@@#+++ ", " ..@@@@@@@@@@@@@@@#++ ", " #@@=#---@@=====@# ", " #@@=#---@@;>>>;@# ", " #@@,#---@@;>>>;@# ", " #@@,#---@@;>>>;@# ", " #@@=#---@@-----@# ", " #@@=#---@@@@@@@@# ", " #@@=##--@@@@@@@@# ", " ################# ", " ", " " ] zero_Icon = [ "24 24 6 1", " c None", ". c #CC0000", "+ c #000000", "@ c #BABDB6", "# c #4E9A06", "$ c #204A87", " .. ", " .. ", " .. ", " .. ", " .. ", " .. ", " .. ", " ++@ ..@ ++@ ", " ++++@ +..+@ ++++@ ", " ++@ ++@ ++..++@ ++@ ++@", " +@ +@ +@.. +@ +@ +@", "######+@###$$#+@######+@", "######+@###$$#+@######+@", " ++@ ++@ ++..++@ ++@ ++@", " ++++ + ++++ + ++++ ", " ++ ++ ++ ++ ++ ", " + .. + ", " ++ ..++ ", " ++ ..+ ", " .. ", " .. ", " .. ", " .. ", " .. " ] reset_Icon = [ "24 24 3 1", " c None", ". c #3465A4", "+ c #888A85", " ", " ........ ", " .++++++++. ", " .++..+....+. ..... ", " .+.. .+....+. .+++. ", " .+. .+....+..+.+. ", " ... .+....+.+.+. ", " .+....+..+. ", " .+......+. ", " .+.....+. ", " .+....+. ", " ...... .+...+. ", " .++++. .++++. ", " .+...+. ...... ", " .+....+. ", " .+.....+. ", " .+......+. ", " .+..+....+. ", " .+.+.+....+. ... ", " .+.+..+....+. .+. ", " .+++. .+....+. ..+. ", " ..... .+....+..++. ", " .++++++++. ", " ........ " ] code_Python_Icon = [ "24 24 3 1", " c None", ". c #3B7AAC", "+ c #EDD400", " ", " ++++++++++++++++++++. ", " + . ", " + . ", " + ..... . ", " + . ..... . ", " + ....... + . ", " + ... +++ . ", " + ........ ++++ . ", " + ......... +++++ . ", " + ......... ++++++ . ", " + ....... +++++++ . ", " + ...... +++++++++ . ", " + ..... +++++++++ . ", " + .... ++++++++ . ", " + ... +++ . ", " + . +++++++ . ", " + +++++ + . ", " + +++++ . ", " + . ", " + . ", " + . ", " +.................... ", " " ] code_FC_Icon = [ "24 24 5 1", " c None", ". c #000000", "+ c #CB0208", "@ c #204A86", "# c #BABDB6", " ", " ", " ", " ", " ", "@@@ @@@ @@@ @@@", "@ @ @ @", "@ ++# @ @ ++# @", "@ ++++# @ @ ++++# @", "@ ++# ++#@ @ ++# ++#@", "@ +# +#@ @ +# +#@", "@ +# +#@ @ +# +#@", "@ +# +#@ @ +# +#@", "@ ++# ++#@ @ ++# ++#@", "@ ++++ @ @ ++++ @", "@ ++ @ @ ++ @", "@ @ @ @", "@ @ @ @", "@@@ @@@ . @@@ @@@", " .. ", " . ", " .. ", " .. ", " " ] rotate_Icon = [ "24 24 4 1", " c None", ". c #000100", "+ c #000201", "@ c #6695BF", " ", " ++++++++ ", " +@@@@@@@@+ ", " +@@......@@++ ", " +@@.@@@@@@.@@@+ ++ ", " +@@.@@++++@@.@@@+@+ ", " +@@.@@+ +@@.@@@@+ ", " +@@.@@+ +@@.@@@+ ", " +@.@@+ +@@.@@@+ ", " +@.@+ ++@@@@@@@+ ", " +@.@+ ++@@@@@@+ ", " +@.@+ +++@@@+ ", " +@.@+ +++++ ", " +@.@+ ", " +@.@@+ ", " +@@.@@+ +++ ", " +@@.@@+ +@+ ", " +@@.@@+++++@@+ ", " +@@.@@@@@@@@+ ", " +@@.....@@+ ", " +@@@@@@@++ ", " +++++++ ", " ", " " ] translate_Icon = [ "24 24 9 1", " c None", ". c #000100", "+ c #000407", "@ c #6694BF", "# c #6D92BE", "$ c #6A93C5", "% c #6795C0", "& c #6F93C0", "* c #6896C1", " ", " ", " .. ", " .@. ", " .@@.. ", " .@@@@. ", " .@@@@@. ", " ..........@@@@@@. ", " +**&%%&@&@@@@@@@. ", " .............+@@@$.. ", " +@@@@@@@@@@@@@@@@@@. ", " ..........+@@@@@@@@@@. ", " +@@@@@@@@@@@@@@@@@@+ ", " ........+@@@@@@@@@++ ", " +@@@@@@@@@@@@@@@. ", " ..........@@@@@@. ", " .@@@@@. ", " .@@@@. ", " .@@.. ", " .@. ", " .. ", " ", " ", " " ] OnClickApply_Icon = [ "24 24 9 1", " c None", ". c #910000", "+ c #F20001", "@ c #54595E", "# c #4B9A00", "$ c #8A8C89", "% c #B0B2AE", "& c #FED758", "* c #DFE1DC", " ", " .. ", " ....... ", " ....++ ", " .+.+++ ", " ....+++++ ", " $.+++++++%%%% ", " **$.++++++***&& ", " %***$.+++++&*&&& ", " *****$.++++&&&&* ", " %******$.+++&&&**% ", " *******&$.++&&&&** ", " ***&&&&&&$.+&&&&&&& ", " %*******&&&$.&&&&**% ", " *********&&&$&&&**** ", " ********&&&&&&&&&***% ", " %*******&&&*&&&*&&&**% ", " %%%%%%%%&&%%%&%%%&&%%$ ", " %%%$%%%%%%%%%&%@%#%+%$ ", " %%%$$%%%%%%%%&%%%%%%%$ ", " %%%%%%%%%%%%%&%%%%%%%$ ", " $%%%%%%%%%%%%%%%%%%%%$ ", " @@@@@@@@@@@@@@@@@@@@@ ", " " ] normalWork_Icon = [ "24 24 9 1", " c None", ". c #565854", "+ c #555753", "@ c #2E3436", "# c #FFFFFF", "$ c #FCE94F", "% c #FEFEFE", "& c #EDD400", "* c #BABDB6", " ", " ...................... ", " . . ", " . +++++ +++++ . ", " . . ", " . . ", " . +++++ +++++ . ", " . . ", " . . ", " . +++++ +++++ . ", " . . ", " . . ", " ...................... ", " ", " ", " @@@@@@@@@@@@@@@", " @#$$#########%@", " @#&&###@@@#@@%@", " @%&&%########%@", " @#**#########%@", " @@@@@@@@@@@@@@@", " ", " ", " " ] PointCenter_Icon = [ "24 24 9 1", " c None", ". c #CB0007", "+ c #363C3C", "@ c #A34467", "# c #666768", "$ c #756D98", "% c #999E9D", "& c #C2C4C0", "* c #E3E5E1", " ", " +++++++ ", " ++%&***&#++ ", " +&***&&&***&+ ", " +**%#+++++%&**+ ", " +*&#+ +#&*+ ", " +**#+ +#**+ ", " +%*#+ +#*%+ ", " +*&+ . . +&*+ ", "+#*% .. .. %*#+ ", "+%*# ...... #*%+ ", "+%*+ .... +*%+ ", "+%*+ .... +*%+ ", "+#*# ...... #*#+ ", " +*% .. .. %*+ ", " +&* . . +*&+ ", " +*+ +%*+ ", " +&*+ +#*&+ ", " +&*++ ++%*&+ ", " +&**&+++++&**&+ ", " +#&*******%#+ ", " ++#%%%%%#++ ", " +++++++ ", " " ] positif_Icon = [ "24 24 9 1", " c None", ". c #213B07", "+ c #3B6212", "@ c #487415", "# c #5AA713", "$ c #66BB14", "% c #6FC31C", "& c #7ACE23", "* c #80D82B", " ", " ", " ++++++ ", " +****+ ", " +****+ ", " +****+ ", " +****+ ", " +****+ ", " +****+ ", " ++++++++****++++++++ ", " +******************+ ", " +******************+ ", " +******************+ ", " +******************+ ", " ++++++++****++++++++ ", " +****+ ", " +****+ ", " +****+ ", " +****+ ", " +****+ ", " +****+ ", " ++++++ ", " ", " " ] negatif_Icon = [ "24 24 9 1", " c None", ". c #000100", "+ c #3C0406", "@ c #680A0D", "# c #7B0B13", "$ c #B00206", "% c #C40D0D", "& c #D7171A", "* c #EA2525", " ", " ", " ", " ", " ", " ", " ", " ", " ", " @@@@@@@@@@@@@@@@@@@@ ", " @******************@ ", " @******************@ ", " @******************@ ", " @******************@ ", " @@@@@@@@@@@@@@@@@@@@ ", " ", " ", " ", " ", " ", " ", " ", " ", " " ] global objectPlacementAngle ; objectPlacementAngle = "" def objectRealPlacement3D(obj): global objectPlacementAngle try: objectPlacement = obj.Shape.Placement #### objectPlacementBase = FreeCAD.Vector(objectPlacement.Base) #### objectWorkCenter = objectPlacementBase #### objectPlacementAngle = objectPlacement.Rotation.toEuler() if hasattr(obj, "getGlobalPlacement"): globalPlacement = obj.getGlobalPlacement() globalPlacementBase = FreeCAD.Vector(globalPlacement.Base) objectRealPlacement3D = globalPlacementBase.add(objectWorkCenter).sub(objectPlacementBase) objectPlacementAngle = globalPlacement.Rotation.toEuler() else: objectRealPlacement3D = objectWorkCenter return objectRealPlacement3D except Exception: return FreeCAD.Vector(0.0, 0.0, 0.0) try: _fromUtf8 = QtCore.QString.fromUtf8 except AttributeError: def _fromUtf8(s): return s class Ui_MainWindow(object): def __init__(self ): global path, path2 self.window = MainWindow self.path = path self.vueActive = FreeCADGui.ActiveDocument.ActiveView self.click = self.vueActive.addEventCallback("SoMouseButtonEvent",self.souris) def souris(self,info): global sourisPass if (info["Button"] == "BUTTON1") and (info["State"] == "DOWN"): #time.sleep(0.02) sourisPass = 0 #print("ok") def setupUi(self, MainWindow): self.window = MainWindow MainWindow.setObjectName(_fromUtf8("MainWindow")) global saveListView # MainWindow.resize(360, 300) # MainWindow.setMinimumSize(QtCore.QSize(330, 10)) # MainWindow.setMaximumSize(QtCore.QSize(330, 330)) # MainWindow.setStyleSheet("background-color: rgb(50, 50, 50);") # MainWindow.move(900, 100) self.centralwidget = QtWidgets.QWidget(MainWindow) self.centralwidget.setObjectName(_fromUtf8("centralwidget")) #### self.groupBox_Rotation = QtWidgets.QGroupBox(self.centralwidget) self.groupBox_Rotation.setEnabled(False) self.RB_Bond_Box_Center = QtWidgets.QRadioButton() self.RB_Bond_Box_Center.setChecked(True) self.RB_Bond_Box_Center.setIcon(QtGui.QIcon(QtGui.QPixmap(boundBox_Center_Icon))) #icone dans une variable self.RB_Bond_Box_Center.clicked.connect(self.on_RB_CenterRot) self.RB_Center_Mass = QtWidgets.QRadioButton() self.RB_Center_Mass.setIcon(QtGui.QIcon(QtGui.QPixmap(centerMass_Icon))) # icone dans une variable self.RB_Center_Mass.clicked.connect(self.on_RB_CenterRot) self.RB_Point_Clicked = QtWidgets.QRadioButton() self.RB_Point_Clicked.setIcon(QtGui.QIcon(QtGui.QPixmap(point_Clicked_Icon))) # icone dans une variable self.RB_Point_Clicked.clicked.connect(self.on_RB_CenterRot) #### self.groupBox_Axis = QtWidgets.QGroupBox() self.groupBox_Axis.setEnabled(False) self.RB_Rotation_0 = QtWidgets.QRadioButton() # factice pour bouton invisible self.RB_Rotation_0.setVisible(False) # self.RB_Rotation_0.clicked.connect(self.on_RB_Rotation_0) self.RB_Rotation_X = QtWidgets.QRadioButton() self.RB_Rotation_X.setChecked(True) self.RB_Rotation_X.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_Z_Icon))) # icone dans une variable self.RB_Rotation_X.clicked.connect(self.on_RB_Rotation_X) self.RB_Rotation_Y = QtWidgets.QRadioButton() self.RB_Rotation_Y.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_Y_Icon))) # icone dans une variable self.RB_Rotation_Y.clicked.connect(self.on_RB_Rotation_Y) # self.RB_Angle_Y.setFont(QtGui.QFont(self.FontImpost,weight=QtGui.QFont.Bold)) # Bold # self.RB_Angle_Y.setStyleSheet("color : #008700") # Color text self.RB_Rotation_Z = QtWidgets.QRadioButton() self.RB_Rotation_Z.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_X_Icon))) # icone dans une variable self.RB_Rotation_Z.clicked.connect(self.on_RB_Rotation_Z) self.RB_Direction_D = QtWidgets.QRadioButton() self.RB_Direction_D.setIcon(QtGui.QIcon(QtGui.QPixmap(direction_Icon))) # icone dans une variable self.RB_Direction_D.clicked.connect(self.on_RB_Direction_D) #### self.groupBox_Pos_Mouse = QtWidgets.QGroupBox() self.groupBox_Pos_Mouse.setEnabled(False) self.DS_Pos_Mouse_X = QtWidgets.QDoubleSpinBox() self.DS_Pos_Mouse_X.setMinimum(-999999.9) self.DS_Pos_Mouse_X.setMaximum(99999999.9) self.DS_Pos_Mouse_X.setDecimals(6) self.DS_Pos_Mouse_X.setSuffix(" X") # self.DS_Pos_Mouse_X.setIcon(QtGui.QIcon(QtGui.QPixmap(CameraToFace))) # icone dans une variable self.DS_Pos_Mouse_X.valueChanged.connect(self.on_DS_Pos_Mouse_X) self.DS_Pos_Mouse_Y = QtWidgets.QDoubleSpinBox() self.DS_Pos_Mouse_Y.setMinimum(-999999.9) self.DS_Pos_Mouse_Y.setMaximum(99999999.9) self.DS_Pos_Mouse_Y.setDecimals(6) self.DS_Pos_Mouse_Y.setSuffix(" Y") # self.PB_To_Face.setIcon(QtGui.QIcon(QtGui.QPixmap(CameraToFace))) # icone dans une variable self.DS_Pos_Mouse_Y.valueChanged.connect(self.on_DS_Pos_Mouse_Y) self.DS_Pos_Mouse_Z = QtWidgets.QDoubleSpinBox() self.DS_Pos_Mouse_Z.setMinimum(-999999.9) self.DS_Pos_Mouse_Z.setMaximum(99999999.9) self.DS_Pos_Mouse_Z.setDecimals(6) self.DS_Pos_Mouse_Z.setSuffix(" Z") # self.PB_To_Face.setIcon(QtGui.QIcon(QtGui.QPixmap(CameraToFace))) # icone dans une variable self.DS_Pos_Mouse_Z.valueChanged.connect(self.on_DS_Pos_Mouse_Z) #### self.groupBox_Work = QtWidgets.QGroupBox() self.groupBox_Work.setEnabled(False) # self.SC_Slider_Bar = QtWidgets.QSlider() # self.SC_Slider_Bar.setMinimum(0.0) # self.SC_Slider_Bar.setMaximum(359.0) # self.SC_Slider_Bar.setValue(0.0) # self.SC_Slider_Bar.setSliderPosition(0) # self.SC_Slider_Bar.setOrientation(QtCore.Qt.Horizontal) # self.SC_Slider_Bar.valueChanged.connect(self.on_SC_Slider_Bar) self.LE_Increment = QtWidgets.QLineEdit() self.LE_Increment.setReadOnly(True) self.LE_Increment.setText(str(0.0)) #self.LE_Increment.returnPressed.connect(self.on_LE_Increment_Pressed) self.LE_Increment.textChanged.connect(self.on_LE_Increment_Pressed) self.DS_Value_Angle_Dimension = QtWidgets.QDoubleSpinBox() self.DS_Value_Angle_Dimension.setMinimum(-360.0) self.DS_Value_Angle_Dimension.setMaximum(360.0) self.DS_Value_Angle_Dimension.setSuffix(" Degrees") self.DS_Value_Angle_Dimension.setDecimals(4) self.DS_Value_Angle_Dimension.valueChanged.connect(self.on_DS_Value_Angle_Dimension) self.PB_Negatif = QtWidgets.QPushButton() self.PB_Negatif.setIcon(QtGui.QIcon(QtGui.QPixmap(negatif_Icon))) # icone dans une variable self.PB_Negatif.clicked.connect(self.on_PB_Negatif_clicked) self.PB_Apply = QtWidgets.QPushButton() self.PB_Apply.setAutoRepeat(True) self.PB_Apply.setIcon(QtGui.QIcon(QtGui.QPixmap(apply_Icon))) # icone dans une variable self.PB_Apply.clicked.connect(self.on_PB_Apply_clicked) self.CB_Position = QtWidgets.QCheckBox() #self.CB_Position.setEnabled(False) self.CB_Position.setIcon(QtGui.QIcon(QtGui.QPixmap(translate_Icon))) #icone dans une variable self.CB_Position.clicked.connect(self.on_CB_Position) self.PB_Point = QtWidgets.QPushButton() #self.PB_Point.setEnabled(False) self.PB_Point.setIcon(QtGui.QIcon(QtGui.QPixmap(point_Icon))) # icone dans une variable self.PB_Point.clicked.connect(self.on_CB_Point) self.PB_PointCenter = QtWidgets.QPushButton() #self.PB_PointCenter.setEnabled(False) self.PB_PointCenter.setIcon(QtGui.QIcon(QtGui.QPixmap(PointCenter_Icon))) # icone dans une variable self.PB_PointCenter.clicked.connect(self.on_PB_PointCenter) self.CBox_View = QtWidgets.QComboBox() #QtCore.QObject.connect(self.CBox_View, QtCore.SIGNAL("currentIndexChanged(QString)"), self.on_CBox_View) QtCore.QObject.connect(self.CBox_View, QtCore.SIGNAL("activated(QString)"), self.on_CBox_View) self.CBox_Impost = QtWidgets.QComboBox() self.CBox_Impost.setCurrentIndex(4) self.CBox_Impost.setMaxVisibleItems(16) self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") self.CBox_Impost.addItem("") QtCore.QObject.connect(self.CBox_Impost, QtCore.SIGNAL("currentIndexChanged(QString)"), self.on_CBox_Impost) self.CBox_Memory = QtWidgets.QComboBox() #self.CBox_Memory.addItem("") self.CBox_Memory.setDuplicatesEnabled(True) #False #QtCore.QObject.connect(self.CBox_Memory, QtCore.SIGNAL("currentIndexChanged(QString)"), self.on_CBox_Memory) QtCore.QObject.connect(self.CBox_Memory, QtCore.SIGNAL("activated(QString)"), self.on_CBox_Memory) self.groupBox_Data = QtWidgets.QGroupBox() self.groupBox_Data.setEnabled(False) self.TE_Memorize = QtWidgets.QListView() saveListView = QtGui.QStandardItemModel() self.TE_Memorize.setModel(saveListView) self.TE_Memorize.setSelectionRectVisible(True)# self.TE_Memorize.setAlternatingRowColors(True)# self.TE_Memorize.setStyleSheet("alternate-background-color:#fdeeee;") self.TE_Memorize.clicked[QtCore.QModelIndex].connect(self.on_TE_Clicked) self.PB_Save_Memorize = QtWidgets.QPushButton() self.PB_Save_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(save_Icon))) # icone dans une variable self.PB_Save_Memorize.clicked.connect(self.on_PB_Save_Memorize) self.PB_ClearMemo = QtWidgets.QPushButton() self.PB_ClearMemo.setIcon(QtGui.QIcon(QtGui.QPixmap(clear_Icon))) # icone dans une variable self.PB_ClearMemo.clicked.connect(self.on_PB_ClearMemo) self.PB_Delete_Line_Memory = QtWidgets.QPushButton() self.PB_Delete_Line_Memory.setIcon(QtGui.QIcon(QtGui.QPixmap(delete_Icon))) # icone dans une variable self.PB_Delete_Line_Memory.clicked.connect(self.on_PB_Delete_Line_Memory) self.PB_Memorize = QtWidgets.QPushButton() self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Eteint_Icon))) # icone dans une variable self.PB_Memorize.clicked.connect(self.on_PB_Memorize) self.CB_On_Click_Apply = QtWidgets.QCheckBox() self.CB_On_Click_Apply.setIcon(QtGui.QIcon(QtGui.QPixmap(OnClickApply_Icon))) # icone dans une variable self.CB_On_Click_Apply.clicked.connect(self.on_CB_On_Click_Apply) self.CB_DataInMacro = QtWidgets.QCheckBox() self.CB_DataInMacro.setIcon(QtGui.QIcon(QtGui.QPixmap(code_Python_Icon))) # icone dans une variable self.CB_DataInMacro.clicked.connect(self.On_CB_DataInMacro) self.label_00 = QtWidgets.QLabel() self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold #### self.groupBox_Command = QtWidgets.QGroupBox() self.PB_Quit = QtWidgets.QPushButton() self.PB_Quit.setIcon(QtGui.QIcon(QtGui.QPixmap(quit_Icon))) # icone dans une variable self.PB_Quit.clicked.connect(self.on_PB_Quit_clicked) self.PB_Original = QtWidgets.QPushButton() self.PB_Original.setIcon(QtGui.QIcon(QtGui.QPixmap(origin_Icon))) # icone dans une variable self.PB_Original.clicked.connect(self.on_PB_Original_clicked) self.PB_Zero = QtWidgets.QPushButton() self.PB_Zero.setIcon(QtGui.QIcon(QtGui.QPixmap(zero_Icon))) # icone dans une variable self.PB_Zero.clicked.connect(self.on_PB_Zero_clicked) self.PB_Reset = QtWidgets.QPushButton() self.PB_Reset.setIcon(QtGui.QIcon(QtGui.QPixmap(reset_Icon))) # icone dans une variable self.PB_Reset.clicked.connect(self.on_PB_Reset_clicked) #### Gridlayout Header self.gridLayoutWidget = QtWidgets.QWidget(self.centralwidget) self.gridLayout_00_00 = QtWidgets.QGridLayout(self.centralwidget) self.gridLayout_00_00.setContentsMargins(10, 10, 10, 10)#Gauche Haut Droit Bas #### Gridlayout Header #### Gridlayout BEGIN self.grid_00_01 = QtWidgets.QGridLayout() # self.gridLayoutWidget_3 = QtWidgets.QWidget(self.groupBox_Rotation) self.grid_00_01.addWidget(self.groupBox_Rotation, 0, 0, 1, 1) self.grid_00_01.setContentsMargins(0, 0, 0, 0) #Gauche Haut Droite Bas self.grid_00_01_00 = QtWidgets.QGridLayout(self.groupBox_Rotation) self.grid_00_01_00.setContentsMargins(10, 10, 0, 10) self.grid_00_01_00.addWidget(self.RB_Bond_Box_Center, 0, 0, 1, 1) self.grid_00_01_00.addWidget(self.RB_Center_Mass, 1, 0, 1, 1) self.grid_00_01_00.addWidget(self.RB_Point_Clicked, 2, 0, 1, 1) self.gridLayout_00_00.addLayout(self.grid_00_01, 0, 0, 1, 1) #### self.grid_00_02 = QtWidgets.QGridLayout() self.grid_00_02.addWidget(self.groupBox_Axis, 0, 0, 1, 1) self.grid_00_02.setContentsMargins(0, 0, 0, 0) self.grid_00_02_00 = QtWidgets.QGridLayout(self.groupBox_Axis) self.grid_00_02_00.setContentsMargins(10, 10, 0, 10) self.grid_00_02_00.addWidget(self.RB_Rotation_X, 0, 0, 1, 1) self.grid_00_02_00.addWidget(self.RB_Rotation_Y, 1, 0, 1, 1) self.grid_00_02_00.addWidget(self.RB_Rotation_Z, 2, 0, 1, 1) self.grid_00_02_00.addWidget(self.RB_Direction_D, 3, 0, 1, 1) self.gridLayout_00_00.addLayout(self.grid_00_02, 0, 1, 1, 1) #### self.grid_00_03 = QtWidgets.QGridLayout() self.grid_00_03.addWidget(self.groupBox_Pos_Mouse, 1, 0, 1, 1) self.grid_00_03.setContentsMargins(0, 0, 0, 0) self.grid_00_03_00 = QtWidgets.QGridLayout(self.groupBox_Pos_Mouse) self.grid_00_03_00.setContentsMargins(10, 10, 10, 10) self.grid_00_03_00.addWidget(self.DS_Pos_Mouse_X, 0, 0, 1, 1) self.grid_00_03_00.addWidget(self.DS_Pos_Mouse_Y, 0, 1, 1, 1) self.grid_00_03_00.addWidget(self.DS_Pos_Mouse_Z, 0, 2, 1, 1) self.gridLayout_00_00.addLayout(self.grid_00_03, 1, 0, 1, 2) #### self.grid_00_044 = QtWidgets.QGridLayout() self.grid_00_044.addWidget(self.groupBox_Work, 2, 0, 1, 1) self.grid_00_044.setContentsMargins(0, 0, 0, 0) self.grid_00_044_00 = QtWidgets.QGridLayout(self.groupBox_Work) self.grid_00_044_00.addWidget(self.CB_Position, 0, 0, 1, 1) self.grid_00_044_00.addWidget(self.PB_Point, 0, 1, 1, 1) self.grid_00_044_00.addWidget(self.PB_PointCenter, 0, 2, 1, 1) # self.grid_00_044_00.addWidget(self.CBox_View, 1, 0, 1, 1) self.grid_00_044_00.addWidget(self.CBox_Impost, 1, 1, 1, 1) self.grid_00_044_00.addWidget(self.CBox_Memory, 1, 2, 1, 1) # self.grid_00_044_00.addWidget(self.PB_Negatif, 2, 0, 1, 1) self.grid_00_044_00.addWidget(self.DS_Value_Angle_Dimension, 2, 1, 1, 1) self.grid_00_044_00.addWidget(self.PB_Apply, 2, 2, 1, 1) # self.grid_00_044_00.addWidget(self.LE_Increment, 3, 0, 1, 3) self.grid_00_044_00.addWidget(self.label_00, 4, 0, 1, 3) self.gridLayout_00_00.addLayout(self.grid_00_044, 2, 0, 1, 2) #### self.grid_00_044b = QtWidgets.QGridLayout() self.grid_00_044b.addWidget(self.groupBox_Data, 3, 0, 1, 1) self.grid_00_044b.setContentsMargins(0, 0, 0, 0) self.grid_00_044b_00 = QtWidgets.QGridLayout(self.groupBox_Data) self.grid_00_044b_00.addWidget(self.TE_Memorize, 0, 0, 1, 4) self.grid_00_044b_00.addWidget(self.PB_Save_Memorize, 1, 0, 1, 1) self.grid_00_044b_00.addWidget(self.PB_ClearMemo, 1, 1, 1, 1) self.grid_00_044b_00.addWidget(self.PB_Delete_Line_Memory, 1, 2, 1, 1) self.grid_00_044b_00.addWidget(self.PB_Memorize, 1, 3, 1, 1) self.grid_00_044b_00.addWidget(self.CB_DataInMacro, 2, 0, 1, 1) self.grid_00_044b_00.addWidget(self.CB_On_Click_Apply, 2, 1, 1, 1) self.gridLayout_00_00.addLayout(self.grid_00_044b, 3, 0, 1, 2) #### self.grid_00_08 = QtWidgets.QGridLayout() self.grid_00_08.addWidget(self.groupBox_Command, 4, 0, 1, 1) self.grid_00_08.setContentsMargins(0, 0, 0, 0) self.grid_00_08_00 = QtWidgets.QGridLayout(self.groupBox_Command) self.grid_00_08_00.addWidget(self.PB_Quit, 0, 0, 1, 1) self.grid_00_08_00.addWidget(self.PB_Original, 0, 1, 1, 1) self.grid_00_08_00.addWidget(self.PB_Zero, 0, 2, 1, 1) self.grid_00_08_00.addWidget(self.PB_Reset, 0, 3, 1, 1) self.gridLayout_00_00.addLayout(self.grid_00_08, 4, 0, 1, 2) #### Gridlayout END MainWindow.setCentralWidget(self.centralwidget) self.retranslateUi(MainWindow) QtCore.QMetaObject.connectSlotsByName(MainWindow) def retranslateUi(self, MainWindow): global path MainWindow.setWindowFlags(PySide2.QtCore.Qt.WindowStaysOnTopHint) # this function turns the front window (stay to hint) MainWindow.setWindowIcon(QtGui.QIcon(self.path+"Macro_Rotate_To_Point.png")) # change l'icone de la fenetre principale MainWindow.setWindowTitle(__title__ + " (" + __version__ + " : " + __date__ + " (rmu)") _translate = QtCore.QCoreApplication.translate self.groupBox_Rotation.setTitle(_translate("MainWindow", "Point Rotation")) self.RB_Bond_Box_Center.setText(_translate("MainWindow", "Bounbox Center")) self.RB_Bond_Box_Center.setToolTip(_translate("MainWindow", "Point rotation on BoundBox Center")) self.RB_Center_Mass.setText(_translate("MainWindow", "Center of Mass")) self.RB_Center_Mass.setToolTip(_translate("MainWindow", "Point rotation on Center Mass")) self.RB_Point_Clicked.setText(_translate("MainWindow", "Point clicked")) self.RB_Point_Clicked.setToolTip(_translate("MainWindow", "Point rotation on Point Mouse clicked on the object"+"\n" "If twoo points are clicked, the second point is used for axis rotation"+"\n" "The point axis rotation Can be changed during the work as long as the object is selected"+"\n" "For this press the CTRL KEY and click the new point rotation")) #### self.groupBox_Axis.setTitle(_translate("MainWindow", "Axis Rotation")) self.RB_Rotation_X.setText(_translate("MainWindow", "Rotation(Z) Yaw")) self.RB_Rotation_X.setToolTip(_translate("MainWindow", "Rotation on Axis Yaw (Z)")) self.RB_Rotation_Y.setText(_translate("MainWindow", "Rotation(Y) Pitch")) self.RB_Rotation_Y.setToolTip(_translate("MainWindow", "Rotation on Axis Pitch (Y)")) self.RB_Rotation_Z.setText(_translate("MainWindow", "Rotation(X) Roll")) self.RB_Rotation_Z.setToolTip(_translate("MainWindow", "Rotation on Axis Roll (X)")) self.RB_Direction_D.setText(_translate("MainWindow", "Direction")) self.RB_Direction_D.setToolTip(_translate("MainWindow", "Rotation or Translation on Direction" + "\n" "For use the Direction option:" + "\n" "Select First: the object to Rotate/Translate" + "\n" "Second: the path: Line, Wire or Edge")) #### self.groupBox_Work.setTitle(_translate("MainWindow", "Work")) self.groupBox_Pos_Mouse.setTitle(_translate("MainWindow", "Coordinates Point clicked")) self.groupBox_Pos_Mouse.setToolTip(_translate("MainWindow", "Position click mouse modification possible only with mode Point clicked")) self.DS_Pos_Mouse_X.setToolTip(_translate("MainWindow", "Position click mouse X" + "\n" + "modification only with mode Point clicked")) self.DS_Pos_Mouse_Y.setToolTip(_translate("MainWindow", "Position click mouse Y" + "\n" + "modification only with mode Point clicked")) self.DS_Pos_Mouse_Z.setToolTip(_translate("MainWindow", "Position click mouse Z" + "\n" + "modification only with mode Point clicked")) #### self.CB_Position.setText(_translate("MainWindow", "Translation")) self.CB_Position.setToolTip(_translate("MainWindow", "Check for move the object to axis choice X, Y or Z")) self.PB_Point.setText(_translate("MainWindow", "Point")) self.PB_Point.setToolTip(_translate("MainWindow", "Create one point to visualise the point rotation")) self.PB_PointCenter.setText(_translate("MainWindow", "Center")) self.PB_PointCenter.setToolTip(_translate("MainWindow", "Create one point on center face, circle ")) self.LE_Increment.setToolTip(_translate("MainWindow", "Display the original Data + the modification")) # #self.CBox_View.setItemText(0,_translate("MainWindow", "0")) self.CBox_View.setToolTip(_translate("MainWindow", "Memorize the view associate with the Object worked" + "\n" "For automate the zoom on object clicked, see:" + "\n" "User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__ + " > switchZoomOnCilck" "\n" "and check the 'switchZoomOnCilck' option on True and restart " + __title__ )) self.CBox_Impost.setCurrentIndex(4) self.CBox_Impost.setMaxVisibleItems(16) self.CBox_Impost.setItemText(0, "0.0001") self.CBox_Impost.setItemText(1, "0.001") self.CBox_Impost.setItemText(2, "0.01") self.CBox_Impost.setItemText(3, "0.1") self.CBox_Impost.setItemText(4, "0") self.CBox_Impost.setItemText(5, "1") self.CBox_Impost.setItemText(6, "5") self.CBox_Impost.setItemText(7, "10") self.CBox_Impost.setItemText(8, "20") self.CBox_Impost.setItemText(9, "30") self.CBox_Impost.setItemText(10, "40") self.CBox_Impost.setItemText(11, "45") self.CBox_Impost.setItemText(12, "60") self.CBox_Impost.setItemText(13, "90") self.CBox_Impost.setItemText(14, "120") self.CBox_Impost.setItemText(15, "180") self.CBox_Impost.setToolTip(_translate("MainWindow", "Value standard imposted")) # self.CBox_Memory.setItemText(0,_translate("MainWindow", "0")) self.CBox_Memory.setToolTip(_translate("MainWindow", "Value used memorized")) # self.DS_Value_Angle_Dimension.setToolTip(_translate("MainWindow", "Enter the modification")) self.PB_Negatif.setText(_translate("MainWindow", "Invert")) self.PB_Apply.setToolTip(_translate("MainWindow", "Apply the modification")) self.PB_Apply.setText(_translate("MainWindow", "Apply")) self.label_00.setText(_translate("MainWindow", " Select one Object or give one value Angle/Dimension")) #self.label_00.setToolTip("Display the modification Axis and Rotation or Position") #### self.groupBox_Data.setTitle(_translate("MainWindow", "Data")) self.PB_Save_Memorize.setText(_translate("MainWindow", "Save")) self.PB_Save_Memorize.setToolTip(_translate("MainWindow", "Save the memorized placement" + "\n" "Format to save : [Placement.Base], [Placement.Rotation.toEuler]" + "\n" "Ex: [0.0,0.0,0.0],[0.0,0.0,0.0] with the ext: .CoorInfo" + "\n" "If the file exist, the data is saved in Append (adding) mode" + "\n" "If the CheckBox is checked for a Macro the file is saved in Write mode")) self.PB_ClearMemo.setText(_translate("MainWindow", "Clear")) self.PB_ClearMemo.setToolTip(_translate("MainWindow", "Clear the memo data" + "\n" "The Reset button is not actif for this option")) self.PB_Delete_Line_Memory.setText(_translate("MainWindow", "Delete")) self.PB_Delete_Line_Memory.setToolTip(_translate("MainWindow", "Delete the line selected")) self.PB_Memorize.setText(_translate("MainWindow", "Memorize")) self.PB_Memorize.setToolTip(_translate("MainWindow", "Memorize the placement displayed")) self.CB_DataInMacro.setText(_translate("MainWindow", "Macro")) self.CB_DataInMacro.setToolTip(_translate("MainWindow", "If checked, the coordinate is saved in Python code (complete macro) in your Macro directory" + "\n" "Actual : " + path + "\n" "Select the object and run the macro" + "\n" "\t" + "The macro saved has various options :" + "\n" "\t" + " (Q)uit, (D)ecrease, (I)ncrease, (P)ause, (S)tep, (M)emo" + "\n" "If this is not checked, the data hare saved in coordinate mode" + "\n" "\t" + "Ex: [0.0,0.0,0.0],[0.0,0.0,0.0] with the ext: .CoorInfo" + "\n")) self.CB_On_Click_Apply.setText(_translate("MainWindow", "Memo on click")) self.CB_On_Click_Apply.setToolTip(_translate("MainWindow", "Memorize the coordinates on all Click Apply button")) #### self.groupBox_Command.setTitle(_translate("MainWindow", "Command")) self.PB_Quit.setText(_translate("MainWindow", "Quit")) self.PB_Quit.setToolTip(_translate("MainWindow", "Quite the macro")) self.PB_Original.setText(_translate("MainWindow", "Original")) self.PB_Original.setToolTip(_translate("MainWindow", "Move the object to the original position")) self.PB_Reset.setText(_translate("MainWindow", "Reset")) self.PB_Reset.setToolTip(_translate("MainWindow", "Reset the complete data macro")) self.PB_Zero.setText(_translate("MainWindow", "0,0,0")) self.PB_Zero.setToolTip(_translate("MainWindow", "Move the object to the base coordinates 0, 0, 0")) def on_DS_Pos_Mouse_X(self,val): global positionMouse global axisX positionMouse = [val, positionMouse[1], positionMouse[2]] axisX = positionMouse[0] self.DS_Pos_Mouse_X.setValue(axisX) # print("on_DS_Pos_Mouse_X ", val) def on_DS_Pos_Mouse_Y(self,val): global positionMouse global axisY positionMouse = [positionMouse[0], val, positionMouse[2]] axisY = positionMouse[1] self.DS_Pos_Mouse_Y.setValue(axisY) # print("on_DS_Pos_Mouse_Y ", val) def on_DS_Pos_Mouse_Z(self,val): global positionMouse global axisZ positionMouse = [positionMouse[0], positionMouse[1], val] axisZ = positionMouse[2] self.DS_Pos_Mouse_Z.setValue(axisZ) # print("on_DS_Pos_Mouse_Z ", val) # def on_SC_Slider_Bar(self,val): # global ui # global valeur # global myObject # # if (myObject != "") and (self.CB_Free.isChecked()): # valeur = val # self.DS_Value_Angle_Dimension.setValue(1) # self.SC_Slider_Bar.setValue(valeur) # ui.on_PB_Apply_clicked() # ## if self.CB_Free.isChecked(): ## ui.on_PB_Apply_clicked() ## else: ## self.DS_Value_Angle_Dimension.setValue(0.0) ## self.SC_Slider_Bar.setValue(0.0) # print("on_SC_Scroll_Bar ", valeur) def on_PB_Delete_Line_Memory(self): #self.TE_Memorize #QListView global countMemory global saveOnDisk self.model = model = QtGui.QStandardItemModel() try: self.PB_Delete_Line_Memory.setStyleSheet("Base") lineSelected = self.TE_Memorize.selectionModel().selectedRows()[0].row() #textLigne = self.TE_Memorize.selectionModel().currentIndex().data() # affiche la ligne selectionnee self.TE_Memorize.model().removeRow(lineSelected) del saveOnDisk[lineSelected] countMemory -= 1 self.PB_Memorize.setText("Memo (" + str(countMemory) + ")") except Exception: self.PB_Delete_Line_Memory.setStyleSheet("background-color: rgb(255, 0, 0)") # print("on_PB_Delete_Line_Memory ") def on_TE_Clicked(self, index): # click dans la fenetre global saveOnDisk global saveListView global memorySelected ####ori colore la ligne###### # item = saveListView.itemFromIndex(index) # item.setBackground(QtGui.QBrush(QtGui.QColor("#ef1919"))) # if (item.index().row()) in memorySelected: ## memorySelected.remove(item.index().row()) # baseBackground = self.TE_Memorize.palette().color(QPalette.Window) # item.setBackground(QtGui.QBrush(QtGui.QColor(baseBackground))) # else: # memorySelected.append(item.index().row()) ## print(memorySelected) ####ori colore la ligne###### item = saveListView.itemFromIndex(index) memorySelected = [] memorySelected.append(item.index().row()) # print("on_TE_Clicked ",memorySelected[0]) #self.TE_Memorize def on_PB_PointCenter(self): global objectPlacementAngle try: sel = FreeCADGui.Selection.getSelection() placementOrigine = objectRealPlacement3D(FreeCAD.ActiveDocument.getObject(sel[0].Name))# search the original Placement Part.show(FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0].copy()) # create repro shape subObject a = App.ActiveDocument.ActiveObject a.Placement.Base = placementOrigine a.Placement.Rotation = App.Rotation(objectPlacementAngle[0], objectPlacementAngle[1], objectPlacementAngle[2]) point = Draft.makePoint(a.Shape.BoundBox.Center) App.ActiveDocument.ActiveObject.recompute() #App.ActiveDocument.ActiveObject.touch() App.ActiveDocument.ActiveObject.purgeTouched() except Exception: self.PB_PointCenter.setStyleSheet("background-color: red") try: App.ActiveDocument.removeObject(a.Name) except Exception: None # print("on_PB_PointCenter") def on_PB_Memorize(self): global myObject global myObjectName global saveOnDisk global saveListView global countMemory global valeur # if (valeur != 0): self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Allume_Icon))) # icone dans une variable countMemory += 1 xPB = str(myObject.Placement.Base[0]) yPB = str(myObject.Placement.Base[1]) zPB = str(myObject.Placement.Base[2]) xPR = str(myObject.Placement.Rotation.toEuler()[0]) yPR = str(myObject.Placement.Rotation.toEuler()[1]) zPR = str(myObject.Placement.Rotation.toEuler()[2]) ##### # #myObjectName , [(3.7,0.0,41.8), (0.0,3.0,0.0)], # #nomObjet , Placement.Base , Placement.Rotation.toEuler() dummy = '["' + str(myObjectName) + '",' + "("+xPB+","+yPB+","+zPB+"),("+xPR+","+yPR+","+zPR+")]," #### saveOnDisk.append(dummy) self.PB_Memorize.setText("Memo (" + str(countMemory) + ")") self.PB_Memorize.setStyleSheet("background-color: rgb(188, 245, 169)"); # bouton self.PB_Delete_Line_Memory.setStyleSheet("Base") item = QtGui.QStandardItem(dummy) saveListView.appendRow(item) # else: # self.PB_Memorize.setStyleSheet("background-color: #ff0000;") # self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Eteint_Icon))) # icone dans une variable ## print("on_PB_Memorize ",saveListView," ",str(countMemory)) def on_PB_Save_Memorize(self): # Save_Memorize in macro file global pathFile global saveOnDisk global countMemory global path if countMemory != 0: if self.CB_DataInMacro.isChecked(): # SaveName, Filter = PySide2.QtWidgets.QFileDialog.getSaveFileName(None, "Save a file FCMacro", path, "FCMacro (*.FCMacro);;Python (*.py)") # PySide2 nomMacro = FreeCAD.ActiveDocument.Name SaveName, Filter = PySide2.QtWidgets.QFileDialog.getSaveFileName(None, "Save a file FCMacro", path + nomMacro, "(*.FCMacro);;Python (*.py)") # PySide2 else: SaveName, Filter = PySide2.QtWidgets.QFileDialog.getSaveFileName(None, "Save a file CoorInfo", pathFile, "CoorInfo (*.CoorInfo);;Ascii (*.asc);;TXT (*.txt)") # PySide2 if SaveName == "": # if the name file are not selected then Abord process App.Console.PrintMessage("Process aborted"+"\n") else: # if the name file are selected or created then ####new2 pathFile = os.path.dirname(SaveName) + "/" #= C:/Provisoire400/ formatFichier = os.path.splitext(SaveName)[1] #= .png SaveName = os.path.splitext(SaveName)[0] #= /home/kubuntu/.FreeCAD/Macro/Texture_007_H #= C:/Provisoire400/image3D SaveNameformatFichier = SaveName + formatFichier #= C:/Provisoire400/image3D.png ####new2 ######## sauve le dernier chemin utilise si n'est pas une macro######## if self.CB_DataInMacro.isChecked(): None else: FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetString("setLastPath",pathFile) ######## sauve le dernier chemin utilise si n'est pas une macro######## App.Console.PrintMessage("Registration of "+SaveNameformatFichier+"\n") try: if self.CB_DataInMacro.isChecked(): file = open(SaveNameformatFichier, 'w') #'w'write else: file = open(SaveNameformatFichier, 'a') #'a'append try: #### macro first section begin if self.CB_DataInMacro.isChecked(): file.write("# -*- coding: utf-8 -*-" + "\n") file.write("##" + "\n") try: nameAuthor = str(unicodedata.normalize('NFD', __author__).encode('ascii','ignore')) except Exception: nameAuthor = "Sir X" try: file.write("##Created by : " + __title__ + " : " + __version__ + ":" + __date__ + " : " + nameAuthor + "\n") file.write("##Document : " + FreeCAD.ActiveDocument.Name + "\n") #file.write("##Date : " + str(QDate.currentDate().toString()) + "\n") # mer. mars 3 2021 file.write("##Date : " + str(QDate.currentDate().toString("yyyy/MM/dd")) + " # yyyy/MM/dd" + "\n") file.write("##Object(First): " + str(FreeCADGui.Selection.getSelection()[0].Name) + "\n") file.write("##Coordinates : " + str(countMemory) + "\n") file.write("##" + "\n") except Exception: None file.write("import Draft, Part" + "\n") file.write("import PySide2" + "\n") file.write("from pivy import coin" + "\n") file.write("import time, os" + "\n") file.write("" + "\n") file.write("import FreeCAD, FreeCADGui" + "\n") file.write("App = FreeCAD" + "\n") file.write("Gui = FreeCADGui" + "\n") file.write("" + "\n") file.write("global Document; Document = " + chr(34) + FreeCAD.ActiveDocument.Name + chr(34) + "\n") file.write("global xxData ; xxData = [] " + "\n") file.write("global xxKey ; xxKey = " + chr(34) + chr(34) + "\n") file.write("global v, o, c" + "\n") file.write("global vitesse ; vitesse = 0.02" + "\n") file.write("" + "\n") file.write("def help():" + "\n") file.write(" global xxData" + "\n") file.write(" global Document" + "\n") file.write(' App.Console.PrintMessage("__' + FreeCAD.ActiveDocument.Name + '__"+"' + chr(92) + 'n")' + "\n") file.write(' App.Console.PrintMessage("__" + str(len(xxData)) + " Coordinates__"+"' + chr(92) + 'n")' + "\n") file.write(' App.Console.PrintMessage("Type Key Q to Quit"+"' + chr(92) + 'n")' + "\n") file.write(' App.Console.PrintMessage("Type Key D to Decrease speed"+"' + chr(92) + 'n")' + "\n") file.write(' App.Console.PrintMessage("Type Key I to Increase speed"+"' + chr(92) + 'n")' + "\n") file.write(' App.Console.PrintMessage("Type Key P to Pause/Continue or key RETURN or ESCAPE"+"' + chr(92) + 'n")' + "\n") file.write(' App.Console.PrintMessage("Type Key S to Step by Step (key RETURN or ESCAPE to continue)"+"' + chr(92) + 'n")' + "\n") file.write(' App.Console.PrintMessage("Type Key R to Reverse"+"' + chr(92) + 'n")' + "\n") file.write(' App.Console.PrintMessage("Type Key M for this message"+"' + chr(92) + 'n")' + "\n") file.write(' App.Console.PrintMessage("____________________________"+"' + chr(92) + 'n")' + "\n") file.write('\n') file.write('class ViewObserver:' + "\n") file.write(' def logPosition(self, info):' + "\n") file.write(' global xxKey' + "\n") file.write(' global v, o, c' + "\n") file.write(' global vitesse' + "\n") file.write('' + "\n") file.write(' xxKey = info["Key"].upper()' + "\n") file.write(' if xxKey in "QIDPSRM" or xxKey == "RETURN" or xxKey == "PAD_ENTER" or xxKey == "ESCAPE":' + "\n") file.write(' if (xxKey == "Q"): # Quit' + "\n") file.write(' v.removeEventCallback("SoKeyboardEvent",c)' + "\n") file.write(' FreeCAD.Console.PrintMessage("End " + Document + "' + chr(92) + 'n")' + "\n") file.write('' + "\n") file.write(' if (xxKey == "I"): # Increase' + "\n") file.write(' vitesse -= 0.01' + "\n") file.write(' if vitesse <= 0:' + "\n") file.write(' vitesse = 0' + "\n") file.write(' App.Console.PrintMessage("Speed maximum"+"' + chr(92) + 'n")' + "\n") file.write(' else:' + "\n") file.write(' App.Console.PrintMessage(str(vitesse)+"' + chr(92) + 'n")' + "\n") file.write('' + "\n") file.write(' if (xxKey == "D"): # Decrease' + "\n") file.write(' vitesse += 0.01' + "\n") file.write(' App.Console.PrintMessage(str(vitesse)+"' + chr(92) + 'n")' + "\n") file.write('' + "\n") file.write(' if (xxKey == "R"): # Reverse' + "\n") file.write(' xxData.reverse()' + "\n") file.write('' + "\n") file.write(' if (xxKey == "M"): # Help memo' + "\n") file.write(' help()' + "\n") file.write('##Begin of file' + "\n") file.write('xxData = [' + "\n") #### macro first section end #### save data for i in saveOnDisk: file.write(i + "\n") #### save data #### macro second section begin if self.CB_DataInMacro.isChecked(): file.write(']' + "\n") file.write('##End of file' + "\n") file.write('' + "\n") file.write('createPoint = 0 # 0=not point 1=create point #used by "S" :Step to Step' + "\n") file.write('try:' + "\n") file.write(' v = Gui.activeDocument().activeView()' + "\n") file.write(' o = ViewObserver()' + "\n") file.write(' c = v.addEventCallback("SoKeyboardEvent",o.logPosition)' + "\n") file.write('' + "\n") file.write(' ##Select the object' + "\n") file.write(' ##myObject = FreeCADGui.Selection.getSelection()[0] #select the object' + "\n") file.write(' help() #help message' + "\n") file.write('' + "\n") file.write(' ##Loop' + "\n") file.write(' while xxKey != "Q":' + "\n") file.write(' comptCoordinate = -1 # coordinte 0 to ...x' + "\n") file.write(' for p in xxData:' + "\n") file.write(' #if (xxKey == "Q"): break # Quit the loop after finish the complete loop (commented by default: if used quit the loop as is)' + "\n") file.write(' comptCoordinate += 1' + "\n") file.write(' ## p[1]=Coordinate x,y,z; p[2]=Rotation angle x (Roll), y (Pitch), z (Yaw)' + "\n") file.write(' px = float(p[1][0]); rx = float(p[2][0])' + "\n") file.write(' py = float(p[1][1]); ry = float(p[2][1])' + "\n") file.write(' pz = float(p[1][2]); rz = float(p[2][2])' + "\n") file.write(' App.ActiveDocument.getObject(p[0]).Placement=App.Placement(App.Vector(px,py,pz), App.Rotation(rx,ry,rz), App.Vector(0,0,0))' + "\n") file.write(' Gui.updateGui() # rafraichi l''ecran' + "\n") file.write(' time.sleep(vitesse)' + "\n") file.write('' + "\n") file.write(' if xxKey == "P": # Pause' + "\n") file.write(' xxKey = ""' + "\n") file.write(' comptLoop = 0' + "\n") file.write(' while xxKey != "P":' + "\n") file.write(' if xxKey == "RETURN" or xxKey == "PAD_ENTER" or xxKey == "ESCAPE": break' + "\n") file.write(' comptLoop += 1' + "\n") file.write(' if comptLoop > 50000:' + "\n") file.write(' comptLoop = 0' + "\n") file.write(' App.Console.PrintError("You is in mode Pause : Type P or RETURN or ESCAPE to continue" + "' + chr(92) + 'n")' + "\n") file.write(' Gui.updateGui() # rafraichi l''ecran' + "\n") file.write(' xxKey = ""' + "\n") file.write('' + "\n") file.write(' if xxKey == "S": # Step by Step' + "\n") file.write(' App.Console.PrintMessage(str(App.ActiveDocument.getObject(p[0]).Placement) + " #(" + str(comptCoordinate) + ")" + "' + chr(92) + 'n")' + "\n") file.write(' ####' + "\n") file.write(' if createPoint == 1:' + "\n") file.write(' point = Draft.makePoint(App.ActiveDocument.getObject(p[0]).Placement.Base) # create point to Placement.Base' + "\n") file.write(' Draft.autogroup(point) #' + "\n") file.write(' FreeCAD.ActiveDocument.recompute() #' + "\n") file.write(' ####' + "\n") file.write(' xxKey = ""' + "\n") file.write(' while xxKey != "S":' + "\n") file.write(' if xxKey == "RETURN" or xxKey == "PAD_ENTER" or xxKey == "ESCAPE": break' + "\n") file.write(' xxKey = ""' + "\n") file.write(' Gui.updateGui() # rafraichi l''ecran' + "\n") file.write('' + "\n") file.write('except Exception:' + "\n") file.write(' FreeCAD.Console.PrintError("' + chr(92) + 'n"+"Not document open, or not object selected" + "' + chr(92) + 'n")' + "\n") file.write(' try:' + "\n") file.write(' v.removeEventCallback("SoKeyboardEvent",c)' + "\n") file.write(' except Exception:' + "\n") file.write(' None' + "\n") file.write('' + "\n") #### macro second section end except Exception: self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold self.label_00.setText(" Error write file") # App.Console.PrintError("Error write file "+"\n") finally: file.close() except Exception: self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold self.label_00.setText(" Error Write file " + SaveName) # App.Console.PrintError("Error Write file " + SaveName+"\n") # print("on_PB_Save_Memorize") def on_PB_ClearMemo(self): global saveOnDisk global saveListView global countMemory global memorySelected try: model = saveListView = QtGui.QStandardItemModel() self.TE_Memorize.model().removeRows(0, countMemory)# model.rowCount() saveOnDisk = [] self.TE_Memorize.setModel(saveListView) countMemory = 0 memorySelected = [] self.PB_Memorize.setText("Memo") self.PB_Memorize.setStyleSheet("Base") self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Eteint_Icon))) # icone dans une variable except Exception: None # print("on_PB_ClearMemo") def on_CB_On_Click_Apply(self): if self.CB_On_Click_Apply.isChecked(): self.CB_On_Click_Apply.setIcon(QtGui.QIcon(QtGui.QPixmap(normalWork_Icon))) # icone dans une variable self.CB_On_Click_Apply.setText(u"Memo on demand") self.CB_On_Click_Apply.setToolTip(u"Memorize the coordinates on demand") self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Allume_Icon))) # icone dans une variable self.groupBox_Data.setEnabled(True) else: self.CB_On_Click_Apply.setIcon(QtGui.QIcon(QtGui.QPixmap(OnClickApply_Icon))) # icone dans une variable self.CB_On_Click_Apply.setText(u"Memo on click") self.CB_On_Click_Apply.setToolTip(u"Memorize the coordinates on all Click Apply button") # print("on_CB_On_Click_Apply") def On_CB_DataInMacro(self): if self.CB_DataInMacro.isChecked(): self.CB_DataInMacro.setIcon(QtGui.QIcon(QtGui.QPixmap(code_FC_Icon))) # icone dans une variable self.CB_DataInMacro.setText(u"Coordinate") self.PB_Save_Memorize.setText("Save (wr)") self.PB_Save_Memorize.setToolTip("The file is open in mode Write" + "\n" "If the file exist, the file is crushed" + "\n" "") else: self.CB_DataInMacro.setIcon(QtGui.QIcon(QtGui.QPixmap(code_Python_Icon))) # icone dans une variable self.CB_DataInMacro.setText(u"Macro") self.PB_Save_Memorize.setText("Save (ap)") self.PB_Save_Memorize.setToolTip("The file is open in mode Append" + "\n" "If the file exist, the the data hare adding in the file" + "\n" "") # print("On_CB_DataInMacro") def on_DS_Value_Angle_Dimension(self,val): global valeur global myObject global axisX, axisY, axisZ global posX, posY, posZ global rotAngleX, rotAngleY, rotAngleZ valeur = val if (myObject == "") or (valeur == 0): self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Eteint_Icon))) # icone dans une variable self.DS_Value_Angle_Dimension.setValue(0.0) self.DS_Value_Angle_Dimension.setStyleSheet("background-color: rgb(250, 88, 88)") # self.SC_Slider_Bar.setValue(0.0) None else: self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Allume_Icon))) # icone dans une variable self.DS_Value_Angle_Dimension.setStyleSheet("Base") self.PB_Memorize.setStyleSheet("Base") # self.SC_Slider_Bar.setValue(valeur) if self.CB_Position.isChecked(): # translate if self.RB_Rotation_X.isChecked(): posX = valeur posY = posZ = 0.0 self.LE_Increment.setText(str(round(myObject.Placement.Base[0],4) + valeur)) elif self.RB_Rotation_Y.isChecked(): posY = valeur posX = posZ = 0.0 self.LE_Increment.setText(str(round(myObject.Placement.Base[1],4) + valeur)) elif self.RB_Rotation_Z.isChecked(): posZ = valeur posX = posY = 0.0 self.LE_Increment.setText(str(round(myObject.Placement.Base[2],4) + valeur)) elif self.RB_Direction_D.isChecked(): posZ = valeur posX = posY = 0.0 xD = str(round(myObject.Placement.Base[0],4)) yD = str(round(myObject.Placement.Base[1],4)) zD = str(round(myObject.Placement.Base[2],4)) self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")") self.label_00.setText("[Pos=(" + str(round(myObject.Placement.Base[0],2))+" , " + str(round(myObject.Placement.Base[1],2))+" , " + str(round(myObject.Placement.Base[2],2))+")] " + "[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]") else: # rotation if self.RB_Rotation_X.isChecked(): rotAngleX = valeur rotAngleY = rotAngleZ = 0.0 self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4) + valeur)) elif self.RB_Rotation_Y.isChecked(): rotAngleY = valeur rotAngleZ = rotAngleX = 0.0 self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4) + valeur)) elif self.RB_Rotation_Z.isChecked(): rotAngleZ = valeur rotAngleX = rotAngleY = 0.0 self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4) + valeur)) elif self.RB_Direction_D.isChecked(): rotAngleZ = valeur rotAngleX = rotAngleY = 0.0 xD = str(round(myObject.Placement.Rotation.toEuler()[0],4)) yD = str(round(myObject.Placement.Rotation.toEuler()[1],4)) zD = str(round(myObject.Placement.Rotation.toEuler()[2],4)) self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")") self.label_00.setText("[Rot=(" + str(round(rotAngleX,2)) + " , " + str(round(rotAngleY,2)) + " , " + str(round(rotAngleZ,2)) + ")] " + "[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]") # print("on_DS_Value_Angle_Dimension ", valeur) def on_PB_Negatif_clicked(self): if valeur < 0: self.PB_Negatif.setIcon(QtGui.QIcon(QtGui.QPixmap(negatif_Icon))) # icone dans une variable else: self.PB_Negatif.setIcon(QtGui.QIcon(QtGui.QPixmap(positif_Icon))) # icone dans une variable self.DS_Value_Angle_Dimension.setValue(-valeur) # !? # print("on_PB_Negatif_clicked") def on_CBox_View(self,text): # memory view on object worked global duplicate_View global myObjectName global switchZoomOnCilck if text == "Empty": #duplicate_View = sorted(list(set(duplicate_View))) # trie et tire les doublons duplicate_View = sorted(duplicate_View, key=itemgetter(0)) # sort try: # supprime les doublons apres avoir ete trie (sorted) doublon = 1 while doublon < len(duplicate_View): if (duplicate_View[doublon][0] == duplicate_View[doublon-1][0]): del duplicate_View[doublon-1] doublon -= 1 doublon += 1 except Exception: None self.CBox_View.blockSignals(True) self.CBox_View.clear() for i in range(len(duplicate_View)): # copie les noms tries dans ComboBox_View self.CBox_View.addItem(duplicate_View[i][0]) self.CBox_View.blockSignals(False) #self.CBox_View.setItemText(0,_translate("MainWindow", "0")) else: for i in range(len(duplicate_View)): if text == duplicate_View[i][0]: Gui.ActiveDocument.ActiveView.setCamera(duplicate_View[i][1]) #restore previously stored camera settings ##camera = Gui.ActiveDocument.ActiveView.getCamera() #store camera settings to 'cam' # print("on_CBox_View ",text) def on_CBox_Impost(self,text): # value length and degrees if self.CB_Position.isChecked(): self.CBox_Impost.setCurrentIndex(4) self.CBox_Impost.setItemText(0, "0.0001") self.CBox_Impost.setItemText(1, "0.001") self.CBox_Impost.setItemText(2, "0.01") self.CBox_Impost.setItemText(3, "0.1") self.CBox_Impost.setItemText(4, "0") self.CBox_Impost.setItemText(5, "1") self.CBox_Impost.setItemText(6, "5") self.CBox_Impost.setItemText(7, "10") self.CBox_Impost.setItemText(8, "25") self.CBox_Impost.setItemText(9, "50") self.CBox_Impost.setItemText(10, "100") self.CBox_Impost.setItemText(11, "250") self.CBox_Impost.setItemText(12, "500") self.CBox_Impost.setItemText(13, "1000") self.CBox_Impost.setItemText(14, "5000") self.CBox_Impost.setItemText(15, "10000") else: self.CBox_Impost.setCurrentIndex(4) self.CBox_Impost.setItemText(0, "0.0001") self.CBox_Impost.setItemText(1, "0.001") self.CBox_Impost.setItemText(2, "0.01") self.CBox_Impost.setItemText(3, "0.1") self.CBox_Impost.setItemText(4, "0") self.CBox_Impost.setItemText(5, "1") self.CBox_Impost.setItemText(6, "5") self.CBox_Impost.setItemText(7, "10") self.CBox_Impost.setItemText(8, "20") self.CBox_Impost.setItemText(9, "30") self.CBox_Impost.setItemText(10, "40") self.CBox_Impost.setItemText(11, "45") self.CBox_Impost.setItemText(12, "60") self.CBox_Impost.setItemText(13, "90") self.CBox_Impost.setItemText(14, "120") self.CBox_Impost.setItemText(15, "180") self.DS_Value_Angle_Dimension.setProperty("value", text) # print("on_CBox_Impost ",text) def on_CBox_Memory(self,text): # memory the value sort and delete duplicate global duplicate_Memory self.DS_Value_Angle_Dimension.setValue(float(text)) duplicate_Memory.append(float(text)) duplicate_Memory = sorted(list(set(duplicate_Memory))) # sort self.CBox_Memory.blockSignals(True) self.CBox_Memory.clear() for i in range(len(duplicate_Memory)): self.CBox_Memory.addItem(str(duplicate_Memory[i])) self.CBox_Memory.blockSignals(False) # print("on_CBox_Memory ",text) def on_LE_Increment_Pressed(self,text): None # print("on_LE_Increment_Pressed") def on_PB_Apply_clicked(self): global valeur global selM global myObject global myObjectName global duplicate_View global axisX, axisY, axisZ global posX, posY, posZ global rotAngleX, rotAngleY, rotAngleZ if (myObject == "") or (valeur == 0): self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold self.label_00.setText(" Select one Object or give one value Angle/Dimension") # FreeCAD.Console.PrintError("Select one Object or give one value Angle/Dimension" + "\n") self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Eteint_Icon))) # icone dans une variable if valeur == 0: self.DS_Value_Angle_Dimension.setStyleSheet("background-color: rgb(250, 88, 88)") else: self.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Allume_Icon))) # icone dans une variable #Gui.ActiveDocument.ActiveView.setCamera(camera) #restore previously stored camera settings camera = Gui.ActiveDocument.ActiveView.getCamera() #store camera settings to 'cam' duplicate_View.append([myObjectName, camera]) self.on_CBox_View("Empty") self.on_CBox_Memory(self.DS_Value_Angle_Dimension.value()) if self.CB_Position.isChecked(): # translate if self.RB_Direction_D.isChecked(): # direction try: selectedEdge = FreeCADGui.Selection.getSelectionEx()[1].SubObjects[0] # select one element and axis second object (2 selections) except Exception: try: selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[1] # select one element and axis same object (2 selections) except Exception: try: selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0] # select one element and axis same object (1 selection) except Exception: None pointsTrajet = [] try: pointsTrajet = selectedEdge.discretize(Distance = 1.0) # discretize the element except Exception: direction = myObject.Vertexes[0].Point pointsTrajet = direction None try: direction = pointsTrajet[1].sub(pointsTrajet[0]) # search the direction line or sub except Exception: try: direction = myObject.Vertexes[0].Point # direction point except Exception: direction = App.Vector(0.0,0.0,0.0) selM.Placement.Base = myObject.Placement.Base + App.Vector(direction).scale(valeur, valeur, valeur) else: selM.Placement = App.Placement(App.Vector(posX, posY, posZ), App.Rotation(0.0,0.0,0.0), App.Vector(0.0,0.0,0.0)).multiply(App.ActiveDocument.getObject(myObjectName).Placement) myObject = selM if self.RB_Rotation_X.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Base[0],4))) elif self.RB_Rotation_Y.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Base[1],4))) elif self.RB_Rotation_Z.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Base[2],4))) elif self.RB_Direction_D.isChecked(): xD = str(round(myObject.Placement.Base[0],4)) yD = str(round(myObject.Placement.Base[1],4)) zD = str(round(myObject.Placement.Base[2],4)) self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")") self.label_00.setText("[Pos=(" + str(round(myObject.Placement.Base[0],2))+" , " + str(round(myObject.Placement.Base[1],2))+" , " + str(round(myObject.Placement.Base[2],2))+")] " + "[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]") else: # rotation if self.RB_Direction_D.isChecked(): # direction try: selectedEdge = FreeCADGui.Selection.getSelectionEx()[1].SubObjects[0] # select one element and axis second object (2 selections) except Exception: try: selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[1] # select one element and axis same object (2 selections) except Exception: try: selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0] # select one element and axis same object (1 selection) except Exception: None try: direction = selectedEdge.Vertexes[1].Point.sub(selectedEdge.Vertexes[0].Point)# search the direction line or sub except Exception: try: direction = objectRotation.Vertexes[0].Point except Exception: direction = App.Vector(0.0,0.0,0.0) selM.Placement = App.Placement(App.Vector(0.0,0.0,0.0), App.Rotation(App.Vector(direction), valeur), App.Vector(axisX, axisY, axisZ)).multiply(App.ActiveDocument.getObject(myObjectName).Placement) else: selM.Placement = App.Placement(App.Vector(0.0,0.0,0.0), App.Rotation(rotAngleX, rotAngleY, rotAngleZ), App.Vector(axisX, axisY, axisZ)).multiply(App.ActiveDocument.getObject(myObjectName).Placement) # other method myObject = selM if self.RB_Rotation_X.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4))) elif self.RB_Rotation_Y.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4))) elif self.RB_Rotation_Z.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4))) elif self.RB_Direction_D.isChecked(): xD = str(round(myObject.Placement.Rotation.toEuler()[0],4)) yD = str(round(myObject.Placement.Rotation.toEuler()[1],4)) zD = str(round(myObject.Placement.Rotation.toEuler()[2],4)) self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")") self.label_00.setText("[Rot=(" + str(round(myObject.Placement.Rotation.toEuler()[0],2)) + " , " + str(round(myObject.Placement.Rotation.toEuler()[1],2)) + " , " + str(round(myObject.Placement.Rotation.toEuler()[2],2)) + ")] " + "[Axis=("+ str(round(axisX,2))+" , "+ str(round(axisY,2))+" , "+ str(round(axisZ,2))+")]") if self.CB_On_Click_Apply.isChecked(): self.on_PB_Memorize() # FreeCAD.ActiveDocument.recompute() # print("on_PB_Apply_clicked") def on_RB_Rotation_0(self): None # print("on_RB_Rotation_0") def on_RB_Rotation_X(self): global myObject if self.CB_Position.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Base[0],4))) # pos X else: self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4))) # yaw = Z self.DS_Value_Angle_Dimension.setValue(0.0) # print("on_RB_Rotation_X") def on_RB_Rotation_Y(self): global myObject if self.CB_Position.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Base[1],4))) # pos Y else: self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4))) # pitch= Y self.DS_Value_Angle_Dimension.setValue(0.0) # print("on_RB_Rotation_Y") def on_RB_Rotation_Z(self): global myObject if self.CB_Position.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Base[2],4))) # pos Z else: self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4))) # roll = X self.DS_Value_Angle_Dimension.setValue(0.0) # print("on_RB_Rotation_Z") def on_RB_Direction_D(self): global myObject if self.CB_Position.isChecked(): xD = str(round(myObject.Placement.Base[0],4)) yD = str(round(myObject.Placement.Base[1],4)) zD = str(round(myObject.Placement.Base[2],4)) else: xD = str(round(myObject.Placement.Rotation.toEuler()[0],4)) yD = str(round(myObject.Placement.Rotation.toEuler()[1],4)) zD = str(round(myObject.Placement.Rotation.toEuler()[2],4)) self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")") self.DS_Value_Angle_Dimension.setValue(0.0) # print("on_RB_Direction_D") def on_RB_CenterRot(self): # zero global myObject global selM global positionMouse global axisX, axisY, axisZ try: if hasattr(selM, "Shape"): sel = selM.Shape elif hasattr(selM, "Mesh"): # upgrade with wmayer thanks #http://forum.freecadweb.org/viewtopic.php?f=13&t=22331 sel = selM.Mesh elif hasattr(selM, "Points"): sel = selM.Points myObject = sel self.groupBox_Pos_Mouse.setEnabled(False) if self.RB_Bond_Box_Center.isChecked(): # axis axisX = myObject.BoundBox.Center.x axisY = myObject.BoundBox.Center.y axisZ = myObject.BoundBox.Center.z self.label_00.setToolTip("Axis BoundBox.Center") self.RB_Center_Mass.setStyleSheet("Base") elif self.RB_Center_Mass.isChecked(): try: axisX = myObject.CenterOfMass.x axisY = myObject.CenterOfMass.y axisZ = myObject.CenterOfMass.z self.label_00.setToolTip("Axis Center Of Mass") except Exception: # case Mesh.MeshObject self.RB_Bond_Box_Center.setChecked(True) self.RB_Center_Mass.setStyleSheet("background-color: rgb(250, 88, 88)") elif self.RB_Point_Clicked.isChecked(): axisX = positionMouse[0] axisY = positionMouse[1] axisZ = positionMouse[2] self.groupBox_Pos_Mouse.setEnabled(True) self.label_00.setToolTip("Point Mouse") except Exception: self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold self.label_00.setText("Error CenterRot_0") ## FreeCAD.Console.PrintError("Error CenterRot_0" + "\n" + "or Bad selection" + "\n") ## print("on_RB_CenterRot") def on_CB_Position(self): global myObject global posX, posY, posZ global axisX, axisY, axisZ global ui self.on_CBox_Impost("") if self.CB_Position.isChecked(): self.DS_Value_Angle_Dimension.setMinimum(-999999999.999999999) self.DS_Value_Angle_Dimension.setMaximum(999999999.999999999) self.DS_Value_Angle_Dimension.setSuffix(" mm") self.RB_Rotation_Z.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_Z_Icon))) # icone dans une variable self.RB_Rotation_X.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_X_Icon))) # icone dans une variable self.CB_Position.setIcon(QtGui.QIcon(QtGui.QPixmap(rotate_Icon))) #icone dans une variable self.CB_Position.setToolTip(u"UnCheck for rotate the object in axis selected") self.CB_Position.setText(u"Rotation") self.CB_Position.setToolTip(u"Rotate the object to axis choice X, Y, Z or D") self.groupBox_Rotation.setEnabled(False) self.RB_Bond_Box_Center.setChecked(True) # self.SC_Slider_Bar.setMinimum(-1000) # self.SC_Slider_Bar.setMaximum(1000) # self.DS_Value_Angle_Dimension.setMinimum(-1000) # self.DS_Value_Angle_Dimension.setMaximum(1000) self.groupBox_Axis.setTitle("Axis Translation") self.RB_Rotation_Z.setText("Translation Z ") # translate self.RB_Rotation_Y.setText("Translation Y ") self.RB_Rotation_X.setText("Translation X ") self.RB_Direction_D.setText("Translation D ") try: self.label_00.setText("[Pl.Base=(" + str(round(myObject.Placement.Base[0],2)) + " , " + str(round(myObject.Placement.Base[1],2)) + " , " + str(round(myObject.Placement.Base[2],2)) + ")] " + "[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]") if self.RB_Rotation_X.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Base[0],4))) elif self.RB_Rotation_Y.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Base[1],4))) elif self.RB_Rotation_Z.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Base[2],4))) elif self.RB_Direction_D.isChecked(): xD = str(round(myObject.Placement.Base[0],4)) yD = str(round(myObject.Placement.Base[1],4)) zD = str(round(myObject.Placement.Base[2],4)) self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")") except Exception: self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold self.label_00.setText("Error Position_0 or Bad selection") ## FreeCAD.Console.PrintError("Error Position_0" + "\n" + "or Bad selection" + "\n") else: self.DS_Value_Angle_Dimension.setMinimum(-360.0) self.DS_Value_Angle_Dimension.setMaximum(360.0) self.DS_Value_Angle_Dimension.setSuffix(" Degrees") self.RB_Rotation_Z.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_X_Icon))) # icone dans une variable self.RB_Rotation_X.setIcon(QtGui.QIcon(QtGui.QPixmap(axis_Z_Icon))) # icone dans une variable self.CB_Position.setIcon(QtGui.QIcon(QtGui.QPixmap(translate_Icon))) #icone dans une variable self.CB_Position.setText(u"Translation") self.CB_Position.setToolTip(u"Check for move the object to axis choice X, Y, Z or D") self.groupBox_Rotation.setEnabled(True) # self.SC_Slider_Bar.setMinimum(0.0) # self.SC_Slider_Bar.setMaximum(359.0) # self.DS_Value_Angle_Dimension.setMinimum(0.0) # self.DS_Value_Angle_Dimension.setMaximum(359.0) self.groupBox_Axis.setTitle("Axis Rotation") self.RB_Rotation_Z.setText("Rotation(X) Roll") # rotation self.RB_Rotation_Y.setText("Rotation(Y) Pitch") self.RB_Rotation_X.setText("Rotation(Z) Yaw") self.RB_Direction_D.setText("Rotation(D)") try: self.label_00.setText("[Rot=(" + str(round(myObject.Placement.Rotation.toEuler()[0],2)) + " , " + str(round(myObject.Placement.Rotation.toEuler()[1],2)) + " , " + str(round(myObject.Placement.Rotation.toEuler()[2],2)) + ")] " + "[Axis=("+str(round(axisX,2))+" , "+ str(round(axisY,2))+" , "+ str(round(axisZ,2))+")]") if self.RB_Rotation_X.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4))) elif self.RB_Rotation_Y.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4))) elif self.RB_Rotation_Z.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4))) elif self.RB_Direction_D.isChecked(): xD = str(round(myObject.Placement.Rotation.toEuler()[0],4)) yD = str(round(myObject.Placement.Rotation.toEuler()[1],4)) zD = str(round(myObject.Placement.Rotation.toEuler()[2],4)) self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")") except Exception: self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold self.label_00.setText("Error Position_1 or Bad selection") # FreeCAD.Console.PrintError("Error Position_0" + "\n" + "or Bad selection" + "\n") self.DS_Value_Angle_Dimension.setValue(0.0) # print("on_CB_Position") def on_CB_Point(self): global ui global myObject global selM global myObjectName global positionMouse if hasattr(selM, "Shape"): sel = selM.Shape elif hasattr(selM, "Mesh"): # upgrade with wmayer thanks #http://forum.freecadweb.org/viewtopic.php?f=13&t=22331 sel = selM.Mesh elif hasattr(selM, "Points"): sel = selM.Points myObject = sel if self.RB_Bond_Box_Center.isChecked(): # axis point = Draft.makePoint(myObject.BoundBox.Center.x, myObject.BoundBox.Center.y, myObject.BoundBox.Center.z) point.ViewObject.PointColor = (1.0,0.0,0.0) point.Label = "Point_BoundBox_Center" self.RB_Center_Mass.setStyleSheet("Base") elif self.RB_Center_Mass.isChecked(): try: point = Draft.makePoint(myObject.CenterOfMass.x, myObject.CenterOfMass.y, myObject.CenterOfMass.z) point.ViewObject.PointColor = (0.0,1.0,0.0) point.Label = "Point_CenterOfMass" except Exception: # case Mesh.MeshObject self.RB_Bond_Box_Center.setChecked(True) self.RB_Center_Mass.setStyleSheet("background-color: rgb(250, 88, 88)") elif self.RB_Point_Clicked.isChecked(): point = Draft.makePoint(positionMouse[0], positionMouse[1], positionMouse[2]) point.ViewObject.PointColor = (0.0,0.0,1.0) point.Label = "Point_positionMouse" Gui.Selection.addSelection(App.ActiveDocument.getObject(myObjectName)) FreeCAD.ActiveDocument.recompute() # ui.on_RB_CenterRot() # print("on_CB_Point") def on_PB_Zero_clicked(self): global myObject global selM # if (myObject != ""): # try: myObject = selM pl = App.Placement(App.Vector(0.0,0.0,0.0), App.Rotation(0.0, 0.0, 0.0), App.Vector(0.0, 0.0, 0.0)) myObject.Placement = pl if self.RB_Rotation_X.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4))) elif self.RB_Rotation_Y.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4))) elif self.RB_Rotation_Z.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4))) elif self.RB_Direction_D.isChecked(): xD = str(round(myObject.Placement.Rotation.toEuler()[0],4)) yD = str(round(myObject.Placement.Rotation.toEuler()[1],4)) zD = str(round(myObject.Placement.Rotation.toEuler()[2],4)) self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")") self.label_00.setText("[Rot=(" +str(round(myObject.Placement.Rotation.toEuler()[0],2))+" , "+str(round(myObject.Placement.Rotation.toEuler()[1],2))+" , "+ str(round(myObject.Placement.Rotation.toEuler()[2],2))+")] "+ "[Axis=("+str(round(myObject.Placement.Base.x,2))+" , "+ str(round(myObject.Placement.Base.y,2))+" , "+ str(round(myObject.Placement.Base.z,2))+")]") self.DS_Value_Angle_Dimension.setValue(0.0) self.LE_Increment.setText(str(0.0)) #FreeCAD.ActiveDocument.recompute() Gui.activeDocument().activeView().viewTop() Gui.SendMsgToActiveView("ViewFit") # except Exception: # self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold # self.label_00.setText("Error Zero_0 or Bad selection") ## FreeCAD.Console.PrintError("Error Zero_0" + "\n" + "or Bad selection" + "\n") # else: # self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold # self.label_00.setText(" Select one Object or give one value Angle/Dimension") ## FreeCAD.Console.PrintError("Select one Object or give one value Angle/Dimension" + "\n") ## print("on_PB_Zero_clicked") def on_PB_Original_clicked(self): global ui global myObject global selM global originalPlacement global axisX, axisY, axisZ global rotAngleX, rotAngleY, rotAngleZ # if (myObject != ""): # try: rotAngleX = rotAngleY = rotAngleZ = 0.0 selM.Placement = originalPlacement if hasattr(selM, "Shape"): sel = selM.Shape elif hasattr(selM, "Mesh"): # upgrade with wmayer thanks #http://forum.freecadweb.org/viewtopic.php?f=13&t=22331 sel = selM.Mesh elif hasattr(selM, "Points"): sel = selM.Points myObject = sel self.DS_Value_Angle_Dimension.setValue(0.0) if self.RB_Rotation_X.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4))) # yaw Z elif self.RB_Rotation_Y.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4))) # pitch Y elif self.RB_Rotation_Z.isChecked(): self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4))) # roll Z elif self.RB_Direction_D.isChecked(): xD = str(round(myObject.Placement.Rotation.toEuler()[0],4)) yD = str(round(myObject.Placement.Rotation.toEuler()[1],4)) zD = str(round(myObject.Placement.Rotation.toEuler()[2],4)) self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")") ui.on_RB_CenterRot() self.label_00.setText("[Rot=(" +str(round(myObject.Placement.Rotation.toEuler()[0],2))+" , "+str(round(myObject.Placement.Rotation.toEuler()[1],2))+" , "+ str(round(myObject.Placement.Rotation.toEuler()[2],2))+")] "+ "[Axis=("+str(round(axisX,2))+" , "+ str(round(axisY,2))+" , "+ str(round(axisZ,2))+")]") #FreeCAD.ActiveDocument.recompute() # except Exception: # self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold # self.label_00.setText("Error Original_0 or Bad selection") ## FreeCAD.Console.PrintError("Error Original_0" + "\n" + "or Bad selection" + "\n") # else: # self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold # self.label_00.setText(" Select one Object or give one value Angle/Dimension") ## FreeCAD.Console.PrintError("Select one Object or give one value Angle/Dimension" + "\n") ## print("on_PB_Original_clicked") def on_PB_Reset_clicked(self): global ui global originalObject global myObject global myObjectName global duplicate_Memory global duplicate_View global valeur global posX, posY, posZ global rotAngleX, rotAngleY, rotAngleZ global axisX, axisY, axisZ global countMemory try: for obj in FreeCAD.ActiveDocument.Objects: # deslectionne FreeCADGui.Selection.removeSelection(obj) except Exception: None if countMemory == 0: ui.on_PB_ClearMemo originalObject = myObject = myObjectName = "" posX = posY = posZ = rotAngleX = rotAngleY = rotAngleZ = 0.0 axisX = axisY = axisZ = 0.0 valeur = 0.0 self.DS_Value_Angle_Dimension.setStyleSheet("Base") self.DS_Value_Angle_Dimension.setValue(valeur) self.DS_Value_Angle_Dimension.setSuffix(" Degrees") self.LE_Increment.setText(str(0.0)) self.groupBox_Axis.setTitle("Axis Rotation") self.RB_Rotation_Z.setText("Rotation(X) Roll") self.RB_Rotation_Y.setText("Rotation(Y) Pitch") self.RB_Rotation_X.setText("Rotation(Z) Yaw") self.RB_Direction_D.setText("Rotation(D) Direction") self.groupBox_Rotation.setEnabled(False) self.groupBox_Axis.setEnabled(False) self.groupBox_Pos_Mouse.setEnabled(False) self.groupBox_Work.setEnabled(False) self.groupBox_Data.setEnabled(False) self.DS_Pos_Mouse_X.setValue(0.0) self.DS_Pos_Mouse_Y.setValue(0.0) self.DS_Pos_Mouse_Z.setValue(0.0) # duplicate_View = [] # self.CBox_View.blockSignals(True) # self.CBox_View.clear() # # duplicate_Memory = [] # self.CBox_Memory.blockSignals(True) # self.CBox_Memory.clear() # self.CB_Position.setEnabled(False) # self.CB_Position.setChecked(False) self.CB_Position.setText(u"Translation") self.CB_Position.setToolTip(u"Move the object to axis choice X, Y or Z") #self.PB_Point.setEnabled(False) self.PB_PointCenter.setStyleSheet("Base") # self.CB_Free.setEnabled(False) # self.CB_Free.setChecked(False) self.PB_Memorize.setStyleSheet("Base") self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold self.label_00.setText(" Select one Object or give one value Angle/Dimension") # FreeCAD.Console.PrintError("Select one Object or give one value Angle/Dimension" + "\n") # FreeCAD.Console.PrintMessage("Reset" + "\n") # print("on_PB_Reset_clicked") def on_PB_Quit_clicked(self): global s global switchZoomOnCilck FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macros/FCMmacros/" + __title__).SetBool("switchZoomOnCilck", switchZoomOnCilck) try: self.vueActive.removeEventCallback("SoMouseButtonEvent",self.click) # desinstalle la fonction souris except Exception: None try: FreeCADGui.Selection.removeObserver(s) # Uninstalls resident function (desactivated for read after LeftDock RightDock) self.window.setAttribute(QtCore.Qt.WA_DeleteOnClose, True) # destroy self.window.deleteLater() # destroy self.window.destroy() # destroy except Exception: self.window.hide() # hide the window and close the macro FreeCAD.Console.PrintMessage("Quit Rotate_To_Point" + "\n") ################################################################################################### class SelObserver: def addSelection(self, document, object, element, position): # Selection global ui global sourisPass global switchZoomOnCilck global valeur global positionMouse global originalObject global myObject global myObjectName global originalPlacement global selM global posX, posY, posZ global rotAngleX, rotAngleY, rotAngleZ global axisX, axisY, axisZ if sourisPass == 0: # pour un seul passage sourisPass == 1 selM = FreeCADGui.Selection.getSelection()[0] # select object with getSelection() myObjectName = selM.Name if hasattr(selM, "Shape"): sel = selM.Shape elif hasattr(selM, "Mesh"): # upgrade with wmayer thanks #http://forum.freecadweb.org/viewtopic.php?f=13&t=22331 sel = selM.Mesh elif hasattr(selM, "Points"): sel = selM.Points if switchZoomOnCilck == 1: ui.on_CBox_View(myObjectName) # return on zoom on click object selected positionMouse = position originalObject = myObject = sel originalPlacement = sel.Placement #longueur = (myObject.BoundBox.XLength * 0.5) # pour Axis positionBase = originalObject.Placement.Base # Placement Vector XYZ posX = positionBase.x posY = positionBase.y posZ = positionBase.z Yaw = originalObject.Placement.Rotation.toEuler()[0] # decode angle Euler Yaw Pitch = originalObject.Placement.Rotation.toEuler()[1] # decode angle Euler Pitch Roll = originalObject.Placement.Rotation.toEuler()[2] # decode angle Euler Roll rotAngleX = Yaw rotAngleY = Pitch rotAngleZ = Roll axisX = axisY = axisZ = 0.0 valeur = 0.0 ui.DS_Value_Angle_Dimension.setValue(valeur) ui.DS_Value_Angle_Dimension.setStyleSheet("background-color: rgb(250, 88, 88)") ui.DS_Pos_Mouse_X.setValue(positionMouse[0]) ui.DS_Pos_Mouse_Y.setValue(positionMouse[1]) ui.DS_Pos_Mouse_Z.setValue(positionMouse[2]) ui.on_RB_CenterRot() if ui.CB_Position.isChecked(): ui.groupBox_Rotation.setEnabled(False) else: ui.groupBox_Rotation.setEnabled(True) ui.groupBox_Axis.setEnabled(True) ui.groupBox_Work.setEnabled(True) ui.groupBox_Data.setEnabled(True) ui.PB_Memorize.setIcon(QtGui.QIcon(QtGui.QPixmap(memo_Allume_Icon))) # icone dans une variable #ui.groupBox_Pos_Mouse.setEnabled(True) ui.label_00.setStyleSheet("Base") # origin system ui.label_00.setText("[Rot =(" + str(round(rotAngleX,2))+ " , " + str(round(rotAngleY,2)) + " , " + str(round(rotAngleZ,2)) + ")] " + "[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]") ui.PB_Memorize.setStyleSheet("Base") ui.PB_PointCenter.setStyleSheet("Base") def clearSelection(self,doc): # Si clic sur l'ecran, effacer la selection global ui ui.on_PB_Reset_clicked() ################################################################################################### doc = FreeCAD.ActiveDocument if doc == None: doc = FreeCAD.newDocument() try: for obj in FreeCAD.ActiveDocument.Objects: # deselectionne FreeCADGui.Selection.removeSelection(obj) except Exception: None s=SelObserver() FreeCADGui.Selection.addObserver(s) # installe la fonction en mode resident if __name__ == "__main__": MainWindow = QtWidgets.QMainWindow() MainWindow.setObjectName("__title__") # macro internal Name ui = Ui_MainWindow() ui.setupUi(MainWindow) MainWindow.show()
Example:
Links
The forum feature req: placement - rotate part around its midpoint My macro to Gist mario52a
Version
2021/03/08 version 00.010 : addin zoom on object clicked, memory value, imposted values
2021/02/25 Version=00.09 : correct the macro : cause multi object possible
App.ActiveDocument.getObject(p[0]).Placement
instead
myObject.Placement
2021/02/22 Version=00.08c : correct the center facePoint (19h26 Paris)
2021/02/22 Version=00.08b : correct the center facePoint (17h23 Paris)
2021/02/22 Version=00.08 : adding save macro with multi objects moved
2021/01/24 Version=00.07 : adding option R: reverse
2021/01/12 ver 00.06 : adding the Data section and more options
2020/03/07 ver 00.05.2 : correct the bug translation delete "direction = myObject.Placement.Rotation.multVec(direction)"
2020/03/01 ver 00.05.1 : correct the position of the test "FreeCAD version"
2020/02/29 ver 00.05 : convert to Hdpi (Layout) and add Direction
06/04/2019 ver 00.04 : Python 3
29/03/2018 ver 00.03 : comment the "FreeCAD.ActiveDocument.recompute()" the change value are too slow with complex element in FreeCAD 0.17.... see FC0.17 recompute strange behaviour (regression)
27/03/2017 ver 00.02 : modify the spinbox "Pos" now accept the negative values
05/03/2017 ver 00.01 : add 3 spinbox for displayed the coordinates X Y Z on click mouse
04/03/2017 ver 00.00