Makro Snip
Beschreibung |
---|
Verwende dieses Makro, um Bildschirmfotos im FreeCAD Forum zu veröffentlichen. Am besten füge dieses Makro zu deiner globalen benutzerdefinierten Makro Werkzeugleiste hinzu, damit du schnell und einfach darauf zugreifen kannst. Wenn du im FreeCAD Forum veröffentlichst, ist es oft nützlich, Bildschirmfotos einbinden zu können. Das Problem ist, dass dies eine etwas mühsame Aufgabe ist. Dieses Makro soll diese Aufgabe etwas erleichtern. Das Makro kann Bildschirmfotos machen oder es kann vorhandene Bildschirmfotos verwenden, die bereits in die Zwischenablage des Systems kopiert wurden. Um das bereits in der Zwischenablage befindliche Bild zu umgehen, drücke die Umschalttaste, während du das Makro aufrufst. Um das Makro zur Aufnahme des Bildschirmfotos zu verwenden, passe die Größe und Platzierung des eingeblendeten Dialogfelds an, und klicke dann auf OK. Wenn du auf OK klickst, versucht das Makro, ein Bildschirmfoto des vom Dialogfeld abgedeckten Bildschirmbereichs zu erstellen. Das Dialogfeld selbst ist halbtransparent, so dass du den Inhalt darunter sehen kannst. Versionsmakro : 1.07 Datum der letzten Änderung : 05.08.2019 FreeCAD version : Alle Herunterladen : ToolBar Icon Autor: TheMarkster |
Autor |
TheMarkster |
Herunterladen |
ToolBar Icon |
Links |
Makros Rezepte Wie installiere ich Makros So passen Sie Symbolleisten an |
Macro-Version |
1.07 |
Datum der letzten Änderung |
05.08.2019 |
FreeCAD-Version(s) |
Alle |
Standardverknüpfung |
Unter Windows: Windows Key + Shift + S Unter Mac: Command + Shift + 4 |
Siehe auch |
Macro Copy3DViewToClipboard Macro Screen Wiki |
Beschreibung
Verwende dieses Makro, um Bildschirmfotos auf einfache Weise im FreeCAD Forum zu veröffentlichen.
Am besten füge dieses Makro zu deiner globalen benutzerdefinierten Makro Werkzeugleiste hinzu, damit du schnell und einfach darauf zugreifen kannst.
Beim Veröffentlichen im FreeCAD Forum ist es oft nützlich, Bildschirmfotos beifügen zu können. Das Problem ist, dass dies eine etwas mühsame Aufgabe ist. Dieses Makro soll diese Aufgabe daher etwas erleichtern.
Anwendung
The macro can take screenshots or it can use existing screenshots that have already been copied to the system clipboard. To bypass the image already in clipboard press the Shift key while invoking the macro. To use the macro to take the screenshot adjust the size and placement of the dialog that pops up, then click OK. Upon clicking OK the macro will attempt to take a screenshot of the area of the screen covered by the dialog. The dialog itself is semi-transparent, so you can see the contents beneath.
Schnitt screenshot1, Beachte, wie der Dialog halbtransparent ist. Es wird nur der Bildschirminhalt unterhalb des Dialogs erfasst.
After clicking OK, the macro then takes the screenshot and saves it to a temporary file. A file open dialog is then opened at the file's location. You can drag and drop the file from there to the forum into the textarea where you type in your text for your forum post. Upon canceling the dialog the temporary screenshot file is deleted automatically. You may also open the screenshot file in your default application installed for opening .png files (on Windows this is typically Paint). This can be useful if you wish to add some annotations to the screenshot or perhaps additional editing, such as cropping.
Snip screenshot2, This is the open file dialog that pops up automatically after taking the screenshot. The image can be dragged and dropped to the forum or it can be opened for further processing in your system default application for opening png files. Alternatively, you can right-click on the image and Open with.. another application of your choice.
If the macro doesn't work on your system to capture screenshots it can still be useful for screenshots you have captured using other tools. Simply copy the screenshot to the clipboard, then run the macro. It will create the temporary file and open the file's directory in an open file dialog for you. Some other tools for taking screenshots:
- Windows: Windows Key + Shift + S
- MacOS: Command + Shift + 4
- Linux: gnone-screenshot utility
Parameter
Das Makro unterstützt Benutzerparameter, die mit Werkzeuge → Parameter bearbeiten... → Zusatzmodule → Schnitt_Makro
LastX
,LastY
,LastWidth
,LastHeight
: location and size of snip box last useWindowOpacity
(0.85): a value between 0.0 (less opaque) and 1.0 (more opaque)SnipDelay
(0.5): time (in seconds) delay between snip box close and snip
The Last
parameters are reset by the macro each time it is run. This is how
it keeps track of where to place the snip box, which is the last place it
was when the user took a screenshot.
Der FensterDurchsichtigkeit
Parameter ist die Durchsichtigkeit des Schnittkastens.
The SnipDelay
parameter can be adjusted to speed things up a bit, but if the value is too small the screenshot taken might include the snip box itself because there needs to be duration of time to close the dialog before taking the screenshot.
Skript
Macro_Snip.FCMacro
# -*- coding: utf-8 -*- """ *************************************************************************** * Copyright (c) 2019 <TheMarkster> * * * * This file is a supplement to the FreeCAD CAx development system. * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU Lesser General Public License (LGPL) * * as published by the Free Software Foundation; either version 2 of * * the License, or (at your option) any later version. * * * * This software is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU Library General Public License at http://www.gnu.org/licenses * * for more details. * * * * For more information about the GNU Library General Public License * * write to the Free Software Foundation, Inc., 59 Temple Place, * * Suite 330, Boston, MA 02111-1307 USA * * * *************************************************************************** """ """ Snip Macro This is a macro to make it easier to post screenshots to the FreeCAD forum. The forum supports a drag and drop interface -- just drag and drop an image to the textarea where you type in your post. But it still requires many tedious steps. This macro is to reduce some of those steps. You should add the macro to your custom macro toolbar to save as many clicks as possible. The first thing the macro does is to check if there is an image already saved to the system clipboard, and if so, it uses that one. To bypass the clipboard, press Shift while invoking the macro. """ __title__ = "Snip" __author__ = "TheMarkster" __url__ = "" __Wiki__ = "" __date__ = "2019.08.06" __version__ = 1.07 import FreeCAD from PySide import QtGui,QtCore import uuid import time import tempfile, os, shutil class SnipBox(QtGui.QDialog): def __init__(self): QtGui.QDialog.__init__(self) self.detailsTextEdit = QtGui.QTextEdit("Details") self.Details = QtGui.QPushButton("Details") self.Details.clicked.connect(self.onDetailsClicked) layout = QtGui.QVBoxLayout() layout.addWidget(self.detailsTextEdit) layout.addStretch() buttons = QtGui.QDialogButtonBox( QtGui.QDialogButtonBox.Ok, QtCore.Qt.Horizontal, self) buttons.accepted.connect(self.accept) buttons.rejected.connect(self.reject) buttons.addButton(self.Details, QtGui.QDialogButtonBox.ActionRole) buttons.setCenterButtons(True) layout.addWidget(buttons) self.setLayout(layout) self.detailsTextEdit.setVisible(False) def setDetailedText(self, txt): self.detailsTextEdit.setText(txt) def onDetailsClicked(self): self.detailsTextEdit.setVisible(not self.detailsTextEdit.isVisible()) def event(self, e): #credit serge_gubenko of stackoverflow for this result = QtGui.QDialog.event(self, e) self.setMinimumHeight(0) self.setMaximumHeight(16777215) self.setMinimumWidth(0) self.setMaximumWidth(16777215) self.setSizePolicy(QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Expanding) textEdit = self.findChild(QtGui.QTextEdit) if textEdit != None : textEdit.setMinimumHeight(0) textEdit.setMaximumHeight(16777215) textEdit.setMinimumWidth(0) textEdit.setMaximumWidth(16777215) textEdit.setSizePolicy(QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Expanding) return result pg = FreeCAD.ParamGet("User parameter:Plugins/Snip_Macro") #parameters were originally in BaseApp, but should be in Plugins, so relocate if necessary if FreeCAD.ParamGet("User parameter:BaseApp/Preferences").HasGroup("Snip_Macro"): deprecated = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Snip_Macro") pg.SetInt("LastX",deprecated.GetInt("LastX",0)) pg.SetInt("LastY",deprecated.GetInt("LastY",0)) pg.SetInt("LastWidth",deprecated.GetInt("LastWidth",0)) pg.SetInt("LastHeight",deprecated.GetInt("LastHeight",0)) pg.SetFloat("WindowOpacity",deprecated.GetFloat("WindowOpacity",0.85)) pg.SetFloat("SnipDelay",deprecated.GetFloat("SnipDelay",0.5)) FreeCAD.ParamGet("User parameter:BaseApp/Preferences").RemGroup("Snip_Macro") skipClipboard = False modifiers = QtGui.QApplication.keyboardModifiers() if modifiers == QtCore.Qt.ShiftModifier: skipClipboard = True userCanceled = False fname = "Snip macro screenshot-"+str(uuid.uuid4())[:6]+".png" image = None if not skipClipboard: clip = QtGui.QClipboard() image = clip.image(QtGui.QClipboard.Clipboard) if not image: #use our own screen grabber mb = SnipBox() details = """ Move and resize this box to cover the part of the screen you wish to grab. If it succeeds an open file dialog will appear. Drag and drop the file from the open file dialog to the forum. The file will be deleted after you close the dialog. If this fails you can still use this macro to handle screenshots you copied to the clipboard using other tools: Windows snip tool: Window Key + Shift + S Mac snip tool: Command + Shift + 4 Linux: gnome-screenshot utility If the macro finds there is already an image copied to the clipboard it uses that image instead of bringing up this dialog. Press Shift while invoking this macro to bypass the clipboard. Alternatively, you can clear the image from the clipboard by copying some text to it. The Open button will open the file in the system default application for handling png files, e.g. Paint in windows. This can be useful if you wish to annotate the screenshot. But most of the time you will simply want to drag and drop the file to the forum, then Cancel to close the open file dialog afterwards. If you wish to open the screenshot file with another application, right-click the file and select open with... option or drag/drop to that other application. User Parameters: These can be accessed via Tools menu -> Edit Parameters in Plugins -> Snip_Macro: LastX, LastY, LastWidth, LastHeight -- location and size of snip box last use WindowOpacity (0.85) -- value between 0.0 (less opaque) and 1.0 (more opaque) SnipDelay (0.5) -- time (in seconds) delay between snip box close and snip The SnipDelay parameter can be adjusted to speed things up a bit, but if it is too small the screenshot taken might include the snip box itself because we need to wait for it to close before taking the screenshot. """ mb.setWindowTitle("Snip macro v"+str(__version__)) mb.setDetailedText(details) if pg.GetFloat("WindowOpacity",0.85) == 0.85: pg.SetFloat("WindowOpacity",0.85) mb.setWindowOpacity(pg.GetFloat("WindowOpacity",0.85)) lastX = pg.GetInt("LastX",0) lastY = pg.GetInt("LastY",0) lastWidth = pg.GetInt("LastWidth",100) lastHeight = pg.GetInt("LastHeight",100) mb.setGeometry(lastX, lastY, lastWidth, lastHeight) mb.resize(lastWidth, lastHeight) mb.setWindowFlags(QtCore.Qt.Tool) result = mb.exec_() if not result: userCanceled = True if not userCanceled: clientRect = mb.geometry() rect = mb.frameGeometry() diff = rect.height()-clientRect.height() pg.SetInt("LastX", rect.x()) pg.SetInt("LastY", rect.y()) pg.SetInt("LastWidth", rect.width()) pg.SetInt("LastHeight", rect.height()-diff) QtGui.QApplication.processEvents() snipDelay = pg.GetFloat("SnipDelay", 0.5) if snipDelay == 0.5: pg.SetFloat("SnipDelay", 0.5) time.sleep(snipDelay) #give time for dialog to close before taking screenshot QtGui.QApplication.processEvents() if hasattr(QtGui.QApplication,"primaryScreen"): screen = QtGui.QApplication.primaryScreen() image = screen.grabWindow(0,rect.x(),rect.y(),rect.width(),rect.height()).toImage() else: long_qdesktop_id = QtGui.QApplication.desktop().winId() image = QtGui.QPixmap.grabWindow(long_qdesktop_id, rect.x(), rect.y(), rect.width(), rect.height()).toImage() if not image: raise Exception("Snip Macro Error: Unable to grab screen image\n") if not userCanceled: dirPath = tempfile.mkdtemp() filePath = dirPath + os.path.sep + fname image.save(filePath) fileName = QtGui.QFileDialog.getOpenFileName(QtGui.QApplication.activeWindow(), "Drag the image to the forum, then Cancel will delete the temporary file", dirPath, "PNG (*.png)") if fileName[0]: #user selected Open or double-clicked file import subprocess, os, platform if platform.system() == 'Darwin': # macOS subprocess.call(('open', fileName[0])) elif platform.system() == 'Windows': # Windows os.startfile(fileName[0]) else: # linux variants subprocess.call(('xdg-open', fileName[0])) QtGui.QApplication.processEvents() #allow some time for file to open before deleting temp folder and contents time.sleep(1) QtGui.QApplication.processEvents() shutil.rmtree(dirPath)
Verknüpfung
Die Forumsdiskussion Schnitt Makro