Sketcher UnterbestimmteElementeAuswählen
|
Menüeintrag |
---|
Sketch → Skizzier Werkzeuge → Wähle Freiheitsgrade des Lösers |
Arbeitsbereich |
Sketcher |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
0.18 |
Siehe auch |
Keiner |
Beschreibung
This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).
How to use
- In the Solver messages box located at the top of the Tasks tab, the following message should be displayed:
where "X" is the number of degrees of freedom remaining in the sketch; click on the blue link, or use the menu.Under-constrained sketch with X degrees of freedom
- The elements which have degrees of freedom are highlighted in green.
- Click anywhere in the sketch to clear the highlight color.