Translations:TechDraw HoleShaftFit/7/en

From FreeCAD Documentation
Revision as of 17:20, 5 March 2023 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Select a single linear dimension (length, horizontal or vertical) or a single diameter dimension.
  2. Press the Add hole or shaft fit button.
  3. A task panel will open.
  4. Specify shaft fit or hole fit as applicable.
  5. Select the desired ISO 286 fit option from the combo box. The partner field and the fit type (loose fit, snug fit or press fit) are updated.
  6. Press the OK button.
  7. The selected option and the calculated tolerance values are added to the dimension.