Translations:Sketcher RectangularArray/6/ru

From FreeCAD Documentation
Revision as of 12:44, 23 June 2022 by Hnkmaxim (talk | contribs)
  1. Выберите элементы эскиза на панели задач или в 3D-виде.
  2. Существует несколько способов вызова команды:
    • Нажмите кнопку Rectangular array.
    • Выберите в менюпункт Sketch → Инструменты для эскиза → Прямоугольный массив.
  3. Задайте параметры массива в открывшемся диалоговом окне.
  4. Нажмите кнопку OK.
  5. Move the mouse in the 3D view towards the desired reference point.
    By keeping Ctrl pressed, the angle to the reference point can be fixed in steps of 5°. introduced in version 0.20
  6. Left-click in the 3D view to create the array.
  7. To set the distances between the array elements, edit the dimensional constraints of the array.