Macro Rotate To Point
Description |
---|
Updated version of macro modified the GUI to improve HiDPI support (QGridLayout). Run only FC v0.18 or higher (supporting Qt5 and PySide2) Macro for rotatating an object on itself with the axis of rotation the: boundbox center, center of mass, direction of wire, or last point clicked. For the previous version (Qt4) see Macro_Rotate_To_Point and install it manually. Macro version: 00.05.2 Last modified: 2020/03/07 FreeCAD version: 0.18+ Download: ToolBar Icon Author: Mario52 |
Author |
Mario52 |
Download |
ToolBar Icon |
Links |
Macros recipes How to install macros How to customize toolbars |
Macro Version |
00.05.2 |
Date last modified |
2020/03/07 |
FreeCAD Version(s) |
0.18+ |
Default shortcut |
None |
See also |
None |
Description
Macro to rotate an object on itself with the axis of rotation being either the:
- boundbox center
- center of mass
- direction of wire
- last point clicked
Usage
- Download the macro from the Addon Manager
- Execute the macro
- Select one object
- Choose one of the following orientations:
- Point Rotation
- Boundbox Center: Select the BoundBox center to axis rotation
- Center of Mass: Select the Center of Mass to axis rotation
- Point Clicked: Select the last mouse click as the point for axis rotation
- 1: select the object
- 2: use the CTRL key to choose an extra object
- Axis Rotation
- Rotation(Z) Yaw: Yaw axis
- Rotation(Y) Pitch: Pitch axis
- Rotation(X) Roll: Roll axis
- Coordinates Point clicked
- DoubleSpinBox: Coordinate X on mouse click (modifiable only with the mode "Point Clicked")
- DoubleSpinBox: Coordinate Y on mouse click (modifiable only with the mode "Point Clicked")
- DoubleSpinBox: Coordinate Z on mouse click (modifiable only with the mode "Point Clicked")
- Position: If this checkBox is checked the rotation is disabled, the object placement is done on the axis selected.
- Point: If this checkBox is checked one point is created for visualise the point rotation axis: red X, green Y, blue Z
- Line Edit: The line edit displays the original coordinate to axis selected + the input data given in the spinBox
- Free: If this checkBox is checked the Apply is switched and the rotation or translation is executed in real time
- DoubleSpinBox: Enter the modification
- Apply: Apply the modification to the object
- Quit: Quit the macro
- Original: After modifying the data of the object you can return to the original placement, If you have not deselected the current object.
- 0,0,0 : This option places the object in base coordinate
0, 0, 0
- Reset: Reset the data in the macro and deselect the current object (same mouse click in the 3D view)
Script
Macro_Rotate_To_Point.FCMacro
# -*- coding: utf-8 -*-
from __future__ import unicode_literals
"""
***************************************************************************
* Copyright (c) 2017 2018 2019 2020 <mario52> *
* *
* This file is a supplement to the FreeCAD CAx development system. *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU Lesser General Public License (LGPL) *
* as published by the Free Software Foundation; either version 2 of *
* the License, or (at your option) any later version. *
* for detail see the LICENCE text file. *
** **
* Use at your own risk. The author assumes no liability for data loss. *
* It is advised to backup your data frequently. *
* If you do not trust the software do not use it. *
** **
* *
* This software is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU Library General Public License for more details. *
* *
* You should have received a copy of the GNU Library General Public *
* License along with this macro; if not, write to the Free Software *
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 *
* USA *
***************************************************************************
* WARNING! All changes in this file will be lost and *
* may cause malfunction of the program *
***************************************************************************
"""
#
#
#OS: Windows 10 (10.0)
#Word size of OS: 64-bit
#Word size of FreeCAD: 64-bit
#Version: 0.19.19697 (Git)
#Build type: Release
#Branch: master
#Hash: 8832356802011bf5d70e9d6f0efa89c47bc70a91
#Python version: 3.6.8
#Qt version: 5.12.1
#Coin version: 4.0.0a
#OCC version: 7.3.0
#
#
__title__ = "Macro_Rotate_To_Point"
__author__ = "Mario52"
__url__ = "http://www.freecadweb.org/index-fr.html"
__Wiki__ = "https://www.freecadweb.org/wiki/Macro_Rotate_To_Point"
__version__ = "00.05.2"
__date__ = "2020/03/07" #YYYY/MM/DD
#
#### Test FreeCAD.Version above 0.17 BEGIN ##########################################################################################################
import WebGui
#WebGui.openBrowser("http://www.freecadweb.org/")
try:
import PySide
from PySide import QtGui
import sys, os
def errorDialog(msg):
diag = QtGui.QMessageBox(QtGui.QMessageBox.Critical,u"Error FreeCAD Version",msg )
diag.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint) # PySide #cette fonction met la fenetre en avant
diag.setStyleSheet("QLabel {color : #ffffff; background-color : #FF3300; font: bold}")
FreeCAD.Console.PrintMessage("If you have not redirect to the FreeCAD Web page (with header):" + "\n\n")
FreeCAD.Console.PrintError("* Copyright (c) 2017 2018 2019 <mario52> *" + "\n\n")
FreeCAD.Console.PrintMessage("Copy and paste this link in your Browser:" + "\n\n")
FreeCAD.Console.PrintMessage("https://gist.githubusercontent.com/mario52a/2fc48333deca5a31e6232c29a9db5e4c/raw/9231d5b1d218357305cc0404e46bf6c107509a0e/Macro%2520Rotate%2520To%2520Point.FCMacro" + "\n\n")
#WebGui.openBrowser("https://www.freecadweb.org/wiki/How_to_install_macros")
WebGui.openBrowser("https://gist.githubusercontent.com/mario52a/2fc48333deca5a31e6232c29a9db5e4c/raw/9231d5b1d218357305cc0404e46bf6c107509a0e/Macro%2520Rotate%2520To%2520Point.FCMacro" + "\n\n")
diag.exec_()
diag.setStyleSheet("Base")
Gui.runCommand('Std_DlgMacroExecute',0)
quit("None")
if int(FreeCAD.Version()[1]) < 18: # Version de FreeCAD
memo = PySide.QtGui.QClipboard()
memo.setText(__title__)
errorDialog("This version " + __title__ + " rmu work with the FreeCAD 0.18 or higher. " + "\n"
"PySide2 Qt version: 5" + "\n\n"
"This title name " + __title__ + " is copied in memory" + "\n"
"Quit this window, the macro editor is open automatically." + "\n\n"
"Click the Create button and paste the title name memorized in the dialog window." + "\n\n"
"Copy the code of the page in your FreeCAD browser open and paste it in the macro page." + "\n\n"
"or see the page:" + "\n\n"
"[https://gist.githubusercontent.com/mario52a/2fc48333deca5a31e6232c29a9db5e4c/raw/9231d5b1d218357305cc0404e46bf6c107509a0e/Macro%2520Rotate%2520To%2520Point.FCMacro]" + "\n")
except Exception:
None
#### Test FreeCAD.Version above 0.17 END ############################################################################################################
import PySide2
from PySide2 import (QtWidgets, QtCore, QtGui)
from PySide2.QtWidgets import (QWidget, QApplication, QSlider, QGraphicsView, QGraphicsScene, QVBoxLayout, QStyle)
from PySide2.QtGui import (QPainter, QColor, QIcon)
from PySide2.QtSvg import *
import Draft, Part, PartGui, FreeCADGui, FreeCAD
from FreeCAD import Base
import DraftVecUtils
import time
Gui = FreeCADGui
App = FreeCAD
global ui ; ui = ""
global sourisPass ; sourisPass = 0
global positionMouse ; positionMouse = ""
global originalObject; originalObject = ""
global myObject ; myObject = ""
global originalPlacement; originalPlacement = ""
global valeur ; valeur = 0.0
global axisX ; axisX = 0.0
global axisY ; axisY = 0.0
global axisZ ; axisZ = 0.0
global posX ; posX = 0.0
global posY ; posY = 0.0
global posZ ; posZ = 0.0
global rotAngleX ; rotAngleX = 0.0
global rotAngleY ; rotAngleY = 0.0
global rotAngleZ ; rotAngleZ = 0.0
try:
_fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
def _fromUtf8(s):
return s
class Ui_MainWindow(object):
def __init__(self ):
self.window = MainWindow
################################################
#self.path = FreeCAD.ConfigGet("AppHomePath")
#self.path = FreeCAD.ConfigGet("UserAppData")
#self.path = "your path"
param = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macro")# macro path
self.path = param.GetString("MacroPath","") + "/" # macro path
self.path = self.path.replace("\\","/")
#print("Path for the icons : " , self.path)
################################################
self.vueActive = FreeCADGui.ActiveDocument.ActiveView
self.click = self.vueActive.addEventCallback("SoMouseButtonEvent",self.souris)
def souris(self,info):
global sourisPass
if (info["Button"] == "BUTTON1") and (info["State"] == "DOWN"):
time.sleep(0.02)
sourisPass = 0
#print("ok")
def setupUi(self, MainWindow):
self.window = MainWindow
MainWindow.setObjectName(_fromUtf8("MainWindow"))
MainWindow.resize(360, 300)
# MainWindow.setMinimumSize(QtCore.QSize(330, 10))
# MainWindow.setMaximumSize(QtCore.QSize(330, 330))
self.centralwidget = QtWidgets.QWidget(MainWindow)
self.centralwidget.setObjectName(_fromUtf8("centralwidget"))
####
self.groupBox_Rotation = QtWidgets.QGroupBox(self.centralwidget)
self.groupBox_Rotation.setEnabled(False)
self.RB_Bond_Box_Center = QtWidgets.QRadioButton()
self.RB_Bond_Box_Center.setChecked(True)
self.RB_Bond_Box_Center.clicked.connect(self.on_RB_CenterRot)
self.RB_Center_Mass = QtWidgets.QRadioButton()
self.RB_Center_Mass.clicked.connect(self.on_RB_CenterRot)
self.RB_Point_Clicked = QtWidgets.QRadioButton()
self.RB_Point_Clicked.clicked.connect(self.on_RB_CenterRot)
####
self.groupBox_Axis = QtWidgets.QGroupBox()
self.groupBox_Axis.setEnabled(False)
self.RB_Rotation_0 = QtWidgets.QRadioButton()
self.RB_Rotation_0.setVisible(False)
# self.RB_Rotation_0.clicked.connect(self.on_RB_Rotation_0)
self.RB_Rotation_X = QtWidgets.QRadioButton()
self.RB_Rotation_X.setChecked(True)
self.RB_Rotation_X.clicked.connect(self.on_RB_Rotation_X)
self.RB_Rotation_Y = QtWidgets.QRadioButton()
self.RB_Rotation_Y.clicked.connect(self.on_RB_Rotation_Y)
self.RB_Rotation_Z = QtWidgets.QRadioButton()
self.RB_Rotation_Z.clicked.connect(self.on_RB_Rotation_Z)
self.RB_Direction_D = QtWidgets.QRadioButton()
self.RB_Direction_D.clicked.connect(self.on_RB_Direction_D)
####
self.groupBox_Pos_Mouse = QtWidgets.QGroupBox()
self.groupBox_Pos_Mouse.setEnabled(False)
self.DS_Pos_Mouse_X = QtWidgets.QDoubleSpinBox()
self.DS_Pos_Mouse_X.setDecimals(6)
self.DS_Pos_Mouse_X.setSuffix(" X")
self.DS_Pos_Mouse_X.valueChanged.connect(self.on_DS_Pos_Mouse_X)
self.DS_Pos_Mouse_Y = QtWidgets.QDoubleSpinBox()
self.DS_Pos_Mouse_Y.setDecimals(6)
self.DS_Pos_Mouse_Y.setSuffix(" Y")
self.DS_Pos_Mouse_Y.valueChanged.connect(self.on_DS_Pos_Mouse_Y)
self.DS_Pos_Mouse_Z = QtWidgets.QDoubleSpinBox()
self.DS_Pos_Mouse_Z.setDecimals(6)
self.DS_Pos_Mouse_Z.setSuffix(" Z")
self.DS_Pos_Mouse_Z.valueChanged.connect(self.on_DS_Pos_Mouse_Z)
####
self.SC_Slider_Bar = QtWidgets.QSlider()
self.SC_Slider_Bar.setMinimum(-360.0)
self.SC_Slider_Bar.setMaximum(360.0)
self.SC_Slider_Bar.setValue(0.0)
self.SC_Slider_Bar.setSliderPosition(0)
self.SC_Slider_Bar.setOrientation(QtCore.Qt.Horizontal)
self.SC_Slider_Bar.valueChanged.connect(self.on_SC_Slider_Bar)
self.LE_Increment = QtWidgets.QLineEdit()
self.LE_Increment.setReadOnly(True)
self.LE_Increment.setText(str(0.0))
#self.LE_Increment.returnPressed.connect(self.on_LE_Increment_Pressed)
self.LE_Increment.textChanged.connect(self.on_LE_Increment_Pressed)
self.DS_Scroll_Bar = QtWidgets.QDoubleSpinBox()
self.DS_Scroll_Bar.setMinimum(-360.0)
self.DS_Scroll_Bar.setMaximum(360.0)
self.DS_Scroll_Bar.setDecimals(4)
self.DS_Scroll_Bar.valueChanged.connect(self.on_DS_Scroll_Bar)
self.PB_Apply = QtWidgets.QPushButton()
self.PB_Apply.clicked.connect(self.on_PB_Apply_clicked)
self.CB_Position = QtWidgets.QCheckBox()
self.CB_Position.setEnabled(False)
self.CB_Position.clicked.connect(self.on_CB_Position)
# self.CB_Point = QtWidgets.QCheckBox()
# self.CB_Point.setEnabled(False)
# self.CB_Point.clicked.connect(self.on_CB_Point)
self.PB_Point = QtWidgets.QPushButton()
self.PB_Point.setEnabled(False)
self.PB_Point.clicked.connect(self.on_CB_Point)
self.CB_Free = QtWidgets.QCheckBox()
self.CB_Free.setEnabled(False)
# self.CB_Free.clicked.connect(self.on_CB_Free)
self.label_00 = QtWidgets.QLabel()
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
#self.label_00.setToolTip("Display the modification Axis and Rotation or Position")
self.PB_Quit = QtWidgets.QPushButton()
self.PB_Quit.clicked.connect(self.on_PB_Quit_clicked)
self.PB_Original = QtWidgets.QPushButton()
self.PB_Original.clicked.connect(self.on_PB_Original_clicked)
self.PB_Zero = QtWidgets.QPushButton()
self.PB_Zero.clicked.connect(self.on_PB_Zero_clicked)
self.PB_Reset = QtWidgets.QPushButton()
self.PB_Reset.clicked.connect(self.on_PB_Reset_clicked)
#### Gridlayout Header
self.gridLayoutWidget = QtWidgets.QWidget(self.centralwidget)
self.gridLayout_00_00 = QtWidgets.QGridLayout(self.centralwidget)
self.gridLayout_00_00.setContentsMargins(10, 10, 10, 10)#Gauche Haut Droit Bas
#### Gridlayout Header
#### Gridlayout BEGIN
self.grid_00_01 = QtWidgets.QGridLayout()
# self.gridLayoutWidget_3 = QtWidgets.QWidget(self.groupBox_Rotation)
self.grid_00_01.addWidget(self.groupBox_Rotation, 0, 0, 1, 1)
self.grid_00_01.setContentsMargins(0, 0, 0, 0) #Gauche Haut Droite Bas
self.grid_00_01_00 = QtWidgets.QGridLayout(self.groupBox_Rotation)
self.grid_00_01_00.setContentsMargins(10, 10, 0, 10)
self.grid_00_01_00.addWidget(self.RB_Bond_Box_Center, 0, 0, 1, 1)
self.grid_00_01_00.addWidget(self.RB_Center_Mass, 1, 0, 1, 1)
self.grid_00_01_00.addWidget(self.RB_Point_Clicked, 2, 0, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_01, 0, 0, 1, 1)
####
self.grid_00_02 = QtWidgets.QGridLayout()
self.grid_00_02.addWidget(self.groupBox_Axis, 0, 0, 1, 1)
self.grid_00_02.setContentsMargins(0, 0, 0, 0)
self.grid_00_02_00 = QtWidgets.QGridLayout(self.groupBox_Axis)
self.grid_00_02_00.setContentsMargins(10, 10, 0, 10)
self.grid_00_02_00.addWidget(self.RB_Rotation_X, 0, 0, 1, 1)
self.grid_00_02_00.addWidget(self.RB_Rotation_Y, 1, 0, 1, 1)
self.grid_00_02_00.addWidget(self.RB_Rotation_Z, 2, 0, 1, 1)
self.grid_00_02_00.addWidget(self.RB_Direction_D, 3, 0, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_02, 0, 1, 1, 1)
####
self.grid_00_03 = QtWidgets.QGridLayout()
self.grid_00_03.addWidget(self.groupBox_Pos_Mouse, 2, 0, 1, 1)
self.grid_00_03.setContentsMargins(0, 0, 0, 0)
self.grid_00_03_00 = QtWidgets.QGridLayout(self.groupBox_Pos_Mouse)
self.grid_00_03_00.setContentsMargins(10, 10, 10, 10)
self.grid_00_03_00.addWidget(self.DS_Pos_Mouse_X, 0, 0, 1, 1)
self.grid_00_03_00.addWidget(self.DS_Pos_Mouse_Y, 0, 1, 1, 1)
self.grid_00_03_00.addWidget(self.DS_Pos_Mouse_Z, 0, 2, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_03, 1, 0, 1, 2)
####
self.grid_00_04 = QtWidgets.QGridLayout()
self.grid_00_04.setContentsMargins(0, 10, 0, 0)
self.grid_00_04.addWidget(self.CB_Position, 0, 0, 1, 1)
# self.grid_00_04.addWidget(self.CB_Point, 0, 1, 1, 1)
self.grid_00_04.addWidget(self.PB_Point, 0, 1, 1, 1)
self.grid_00_04.addWidget(self.CB_Free, 0, 2, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_04, 2, 0, 1, 2)
####
self.grid_00_05 = QtWidgets.QGridLayout()
self.grid_00_05.setContentsMargins(0, 10, 0, 0)
self.grid_00_05.addWidget(self.LE_Increment, 0, 0, 1, 1)
self.grid_00_05.addWidget(self.DS_Scroll_Bar, 0, 1, 1, 1)
self.grid_00_05.addWidget(self.PB_Apply, 0, 2, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_05, 3, 0, 1, 2)
####
self.grid_00_06 = QtWidgets.QGridLayout()
self.grid_00_06.setContentsMargins(0, 0, 0, 0)
self.grid_00_06.addWidget(self.SC_Slider_Bar, 0, 0, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_06, 4, 0, 1, 2)
####
self.grid_00_07 = QtWidgets.QGridLayout()
self.grid_00_07.setContentsMargins(0, 0, 0, 0)
self.grid_00_07.addWidget(self.label_00, 0, 0, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_07, 5, 0, 1, 2)
####
self.grid_00_08 = QtWidgets.QGridLayout()
self.grid_00_08.setContentsMargins(0, 0, 0, 0)
self.grid_00_08.addWidget(self.PB_Quit, 0, 0, 1, 1)
self.grid_00_08.addWidget(self.PB_Original, 0, 1, 1, 1)
self.grid_00_08.addWidget(self.PB_Zero, 0, 2, 1, 1)
self.grid_00_08.addWidget(self.PB_Reset, 0, 3, 1, 1)
self.gridLayout_00_00.addLayout(self.grid_00_08, 6, 0, 1, 2)
#### Gridlayout END
MainWindow.setCentralWidget(self.centralwidget)
self.retranslateUi(MainWindow)
QtCore.QMetaObject.connectSlotsByName(MainWindow)
def retranslateUi(self, MainWindow):
MainWindow.setWindowFlags(PySide2.QtCore.Qt.WindowStaysOnTopHint) # this function turns the front window (stay to hint)
MainWindow.setWindowTitle(__title__ + " rmu (" + __version__ + ")")
_translate = QtCore.QCoreApplication.translate
self.groupBox_Rotation.setTitle(_translate("MainWindow", "Point Rotation"))
self.RB_Bond_Box_Center.setText(_translate("MainWindow", "Boundbox Center"))
self.RB_Bond_Box_Center.setToolTip(_translate("MainWindow", "Point rotation on BoundBox Center"))
self.RB_Center_Mass.setText(_translate("MainWindow", "Center of Mass"))
self.RB_Center_Mass.setToolTip(_translate("MainWindow", "Point rotation on Center Mass"))
self.RB_Point_Clicked.setText(_translate("MainWindow", "Point clicked"))
self.RB_Point_Clicked.setToolTip(_translate("MainWindow", "Point rotation on Point Mouse clicked on the object"+"\n"
"If twoo points are clicked, the second point is used for axis rotation"+"\n"
"The point axis rotation Can be changed during the work as long as the object is selected"+"\n"
"For this press the CTRL KEY and click the new point rotation"))
self.groupBox_Axis.setTitle(_translate("MainWindow", "Axis Rotation"))
self.RB_Rotation_X.setText(_translate("MainWindow", "Rotation(Z) Yaw"))
self.RB_Rotation_X.setToolTip(_translate("MainWindow", "Rotation on Axis Yaw (Z)"))
self.RB_Rotation_Y.setText(_translate("MainWindow", "Rotation(Y) Pitch"))
self.RB_Rotation_Y.setToolTip(_translate("MainWindow", "Rotation on Axis Pitch (Y)"))
self.RB_Rotation_Z.setText(_translate("MainWindow", "Rotation(X) Roll"))
self.RB_Rotation_Z.setToolTip(_translate("MainWindow", "Rotation on Axis Roll (X)"))
self.RB_Direction_D.setText(_translate("MainWindow", "Direction"))
self.RB_Direction_D.setToolTip(_translate("MainWindow", "Rotation or Translation on Direction" + "\n"
"For use the Direction option:" + "\n"
"Select First: the object to Rotate/Translate" + "\n"
"Second: the path: Line, Wire or Edge"))
self.groupBox_Pos_Mouse.setTitle(_translate("MainWindow", "Coordinates Point clicked"))
self.groupBox_Pos_Mouse.setToolTip(_translate("MainWindow", "Position click mouse modification possible only with mode Point clicked"))
self.DS_Pos_Mouse_X.setToolTip(_translate("MainWindow", "Position click mouse X" + "\n" +
"modification only with mode Point clicked"))
self.DS_Pos_Mouse_Y.setToolTip(_translate("MainWindow", "Position click mouse Y" + "\n" +
"modification only with mode Point clicked"))
self.DS_Pos_Mouse_Z.setToolTip(_translate("MainWindow", "Position click mouse Z" + "\n" +
"modification only with mode Point clicked"))
self.CB_Position.setText(_translate("MainWindow", "Translation"))
self.CB_Position.setToolTip(_translate("MainWindow", "Move the object to axis choice X, Y or Z"))
# self.CB_Point.setText(_translate("MainWindow", "Point"))
# self.CB_Point.setToolTip(_translate("MainWindow", "If checked, create one point to visualise the point rotation"))
self.PB_Point.setText(_translate("MainWindow", "Point"))
self.PB_Point.setToolTip(_translate("MainWindow", "Create one point to visualise the point rotation"))
self.CB_Free.setText(_translate("MainWindow", "Free"))
self.CB_Free.setToolTip(_translate("MainWindow", "This checkBox switch the Application button"))
self.LE_Increment.setToolTip(_translate("MainWindow", "Display the original Data + the modification"))
self.DS_Scroll_Bar.setToolTip(_translate("MainWindow", "Enter the modification"))
self.PB_Apply.setToolTip(_translate("MainWindow", "Apply the modification"))
self.PB_Apply.setText(_translate("MainWindow", "Apply"))
self.label_00.setText(_translate("MainWindow", " Select one Object"))
self.PB_Quit.setText(_translate("MainWindow", "Quit"))
self.PB_Quit.setToolTip(_translate("MainWindow", "Quite the macro"))
self.PB_Original.setText(_translate("MainWindow", "Original"))
self.PB_Original.setToolTip(_translate("MainWindow", "Move the object to the original position"))
self.PB_Reset.setText(_translate("MainWindow", "Reset"))
self.PB_Reset.setToolTip(_translate("MainWindow", "Reset the complete data macro"))
self.PB_Zero.setText(_translate("MainWindow", "0,0,0"))
self.PB_Zero.setToolTip(_translate("MainWindow", "Move the object to the base coordinates 0, 0, 0"))
def on_DS_Pos_Mouse_X(self,val):
global positionMouse
global axisX
positionMouse = [val, positionMouse[1], positionMouse[2]]
axisX = positionMouse[0]
# print("on_DS_Pos_Mouse_X ", val)
def on_DS_Pos_Mouse_Y(self,val):
global positionMouse
global axisY
positionMouse = [positionMouse[0], val, positionMouse[2]]
axisY = positionMouse[1]
# print("on_DS_Pos_Mouse_Y ", val)
def on_DS_Pos_Mouse_Z(self,val):
global positionMouse
global axisZ
positionMouse = [positionMouse[0], positionMouse[1], val]
axisZ = positionMouse[2]
# print("on_DS_Pos_Mouse_Z ", val)
def on_SC_Slider_Bar(self,val):
global ui
global valeur
global myObject
if myObject != "":
valeur = val
self.DS_Scroll_Bar.setValue(valeur)
self.SC_Slider_Bar.setValue(valeur)
if self.CB_Free.isChecked():
ff = ui
ff.on_PB_Apply_clicked()
else:
self.DS_Scroll_Bar.setValue(0.0)
self.SC_Slider_Bar.setValue(0.0)
# print("on_SC_Scroll_Bar ", valeur)
def on_DS_Scroll_Bar(self,val):
global valeur
global myObject
global axisX, axisY, axisZ
global posX, posY, posZ
global rotAngleX, rotAngleY, rotAngleZ
if myObject == "":
self.DS_Scroll_Bar.setValue(0.0)
self.SC_Slider_Bar.setValue(0.0)
None
else:
valeur = val
self.SC_Slider_Bar.setValue(valeur)
if self.CB_Position.isChecked(): # translate
if self.RB_Rotation_X.isChecked():
posX = valeur
posY = posZ = 0.0
self.LE_Increment.setText(str(round(myObject.Placement.Base[0],4) + valeur))
elif self.RB_Rotation_Y.isChecked():
posY = valeur
posX = posZ = 0.0
self.LE_Increment.setText(str(round(myObject.Placement.Base[1],4) + valeur))
elif self.RB_Rotation_Z.isChecked():
posZ = valeur
posX = posY = 0.0
self.LE_Increment.setText(str(round(myObject.Placement.Base[2],4) + valeur))
elif self.RB_Direction_D.isChecked():
posZ = valeur
posX = posY = 0.0
xD = str(round(myObject.Placement.Base[0],4))
yD = str(round(myObject.Placement.Base[1],4))
zD = str(round(myObject.Placement.Base[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
self.label_00.setText("[Pos=(" + str(round(myObject.Placement.Base[0],2))+" , " +
str(round(myObject.Placement.Base[1],2))+" , " +
str(round(myObject.Placement.Base[2],2))+")] " +
"[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]")
else: # rotation
if self.RB_Rotation_X.isChecked():
rotAngleX = valeur
rotAngleY = rotAngleZ = 0.0
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4) + valeur))
elif self.RB_Rotation_Y.isChecked():
rotAngleY = valeur
rotAngleZ = rotAngleX = 0.0
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4) + valeur))
elif self.RB_Rotation_Z.isChecked():
rotAngleZ = valeur
rotAngleX = rotAngleY = 0.0
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4) + valeur))
elif self.RB_Direction_D.isChecked():
rotAngleZ = valeur
rotAngleX = rotAngleY = 0.0
xD = str(round(myObject.Placement.Rotation.toEuler()[0],4))
yD = str(round(myObject.Placement.Rotation.toEuler()[1],4))
zD = str(round(myObject.Placement.Rotation.toEuler()[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
self.label_00.setText("[Rot=(" + str(round(rotAngleX,2)) + " , " + str(round(rotAngleY,2)) + " , " + str(round(rotAngleZ,2)) + ")] " +
"[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]")
# print("on_DS_Scroll_Bar ", valeur)
def on_LE_Increment_Pressed(self,text):
None
# print("on_lineEdit_1_Pressed")
def on_PB_Apply_clicked(self):
global valeur
global myObject
global positionMouse
global originalPlacement
global originalObject
global axisX, axisY, axisZ
global posX, posY, posZ
global rotAngleX, rotAngleY, rotAngleZ
if (myObject == "") :
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
self.label_00.setText(" Select one Object")
FreeCAD.Console.PrintError("Select one Object" + "\n")
else:
if self.CB_Position.isChecked(): # translate
if self.RB_Direction_D.isChecked(): # direction
try:
selectedEdge = FreeCADGui.Selection.getSelectionEx()[1].SubObjects[0] # select one element and axis second object (2 selections)
except Exception:
try:
selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[1] # select one element and axis same object (2 selections)
except Exception:
try:
selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0] # select one element and axis same object (1 selection)
except Exception:
None
pointsTrajet = []
try:
pointsTrajet = selectedEdge.discretize(Distance = 1.0) # discretize the element
except Exception:
direction = myObject.Shape.Vertexes[0].Point
pointsTrajet = direction
None
try:
direction = pointsTrajet[1].sub(pointsTrajet[0]) # search the direction line or sub
except Exception:
try:
direction = myObject.Shape.Vertexes[0].Point # direction point
except Exception:
direction = App.Vector(0.0,0.0,0.0)
myObject.Placement.Base = myObject.Placement.Base + App.Vector(direction).scale(valeur, valeur, valeur)
else:
myObject.Placement = App.Placement(App.Vector(posX, posY, posZ), App.Rotation(0.0,0.0,0.0), App.Vector(0.0,0.0,0.0)).multiply(App.ActiveDocument.getObject(myObject.Name).Placement)
if self.RB_Rotation_X.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[0],4)))
elif self.RB_Rotation_Y.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[1],4)))
elif self.RB_Rotation_Z.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[2],4)))
elif self.RB_Direction_D.isChecked():
xD = str(round(myObject.Placement.Base[0],4))
yD = str(round(myObject.Placement.Base[1],4))
zD = str(round(myObject.Placement.Base[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
self.label_00.setText("[Pos=(" + str(round(myObject.Placement.Base[0],2))+" , " +
str(round(myObject.Placement.Base[1],2))+" , " +
str(round(myObject.Placement.Base[2],2))+")] " +
"[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]")
else: # rotation
if self.RB_Direction_D.isChecked(): # direction
try:
selectedEdge = FreeCADGui.Selection.getSelectionEx()[1].SubObjects[0] # select one element and axis second object (2 selections)
except Exception:
try:
selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[1] # select one element and axis same object (2 selections)
except Exception:
try:
selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0] # select one element and axis same object (1 selection)
except Exception:
None
try:
direction = selectedEdge.Vertexes[1].Point.sub(selectedEdge.Vertexes[0].Point)# search the direction line or sub
except Exception:
try:
direction = objectRotation.Vertexes[0].Point
except Exception:
direction = App.Vector(0.0,0.0,0.0)
myObject.Placement = App.Placement(App.Vector(0.0,0.0,0.0), App.Rotation(App.Vector(direction), valeur), App.Vector(axisX, axisY, axisZ)).multiply(App.ActiveDocument.getObject(myObject.Name).Placement)
else:
myObject.Placement = App.Placement(App.Vector(0.0,0.0,0.0), App.Rotation(rotAngleX, rotAngleY, rotAngleZ), App.Vector(axisX, axisY, axisZ)).multiply(App.ActiveDocument.getObject(myObject.Name).Placement) # other method
if self.RB_Rotation_X.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4)))
elif self.RB_Rotation_Y.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4)))
elif self.RB_Rotation_Z.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4)))
elif self.RB_Direction_D.isChecked():
xD = str(round(myObject.Placement.Rotation.toEuler()[0],4))
yD = str(round(myObject.Placement.Rotation.toEuler()[1],4))
zD = str(round(myObject.Placement.Rotation.toEuler()[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
self.label_00.setText("[Rot=(" + str(round(myObject.Placement.Rotation.toEuler()[0],2)) + " , " +
str(round(myObject.Placement.Rotation.toEuler()[1],2)) + " , " +
str(round(myObject.Placement.Rotation.toEuler()[2],2)) + ")] " +
"[Axis=("+ str(round(axisX,2))+" , "+ str(round(axisY,2))+" , "+ str(round(axisZ,2))+")]")
# FreeCAD.ActiveDocument.recompute()
# print("on_PB_Apply_clicked")
def on_RB_Rotation_0(self):
None
# print("on_RB_Rotation_0")
def on_RB_Rotation_X(self):
global myObject
if self.CB_Position.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[0],4))) # pos X
else:
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4))) # yaw = Z
self.DS_Scroll_Bar.setValue(0.0)
# print("on_RB_Rotation_X")
def on_RB_Rotation_Y(self):
global myObject
if self.CB_Position.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[1],4))) # pos Y
else:
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4))) # pitch= Y
self.DS_Scroll_Bar.setValue(0.0)
# print("on_RB_Rotation_Y")
def on_RB_Rotation_Z(self):
global myObject
if self.CB_Position.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[2],4))) # pos Z
else:
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4))) # roll = X
self.DS_Scroll_Bar.setValue(0.0)
# print("on_RB_Rotation_Z")
def on_RB_Direction_D(self):
global myObject
if self.CB_Position.isChecked():
xD = str(round(myObject.Placement.Base[0],4))
yD = str(round(myObject.Placement.Base[1],4))
zD = str(round(myObject.Placement.Base[2],4))
else:
xD = str(round(myObject.Placement.Rotation.toEuler()[0],4))
yD = str(round(myObject.Placement.Rotation.toEuler()[1],4))
zD = str(round(myObject.Placement.Rotation.toEuler()[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
self.DS_Scroll_Bar.setValue(0.0)
# print("on_RB_Direction_D")
def on_RB_CenterRot(self): # zero
global myObject
global positionMouse
global axisX, axisY, axisZ
try:
self.groupBox_Pos_Mouse.setEnabled(False)
if self.RB_Bond_Box_Center.isChecked(): # axis
axisX = myObject.Shape.BoundBox.Center.x
axisY = myObject.Shape.BoundBox.Center.y
axisZ = myObject.Shape.BoundBox.Center.z
self.label_00.setToolTip("Axis BoundBox.Center")
elif self.RB_Center_Mass.isChecked():
axisX = myObject.Shape.CenterOfMass.x
axisY = myObject.Shape.CenterOfMass.y
axisZ = myObject.Shape.CenterOfMass.z
self.label_00.setToolTip("Axis Center Of Mass")
elif self.RB_Point_Clicked.isChecked():
axisX = positionMouse[0]
axisY = positionMouse[1]
axisZ = positionMouse[2]
self.groupBox_Pos_Mouse.setEnabled(True)
self.label_00.setToolTip("Point Mouse")
except Exception:
self.label_00.setText("Error CenterRot_0")
FreeCAD.Console.PrintError("Error CenterRot_0" + "\n" + "or Bad selection" + "\n")
# print("on_RB_CenterRot")
def on_CB_Position(self):
global myObject
global posX, posY, posZ
global axisX, axisY, axisZ
if self.CB_Position.isChecked():
self.groupBox_Rotation.setEnabled(False)
self.RB_Bond_Box_Center.setChecked(True)
self.SC_Slider_Bar.setMinimum(-1000)
self.SC_Slider_Bar.setMaximum(1000)
self.DS_Scroll_Bar.setMinimum(-1000)
self.DS_Scroll_Bar.setMaximum(1000)
self.groupBox_Axis.setTitle("Axis Translation")
self.RB_Rotation_Z.setText("Translation Z ") # translate
self.RB_Rotation_Y.setText("Translation Y ")
self.RB_Rotation_X.setText("Translation X ")
self.RB_Direction_D.setText("Translation D ")
try:
self.label_00.setText("[Pl.Base=(" + str(round(myObject.Placement.Base[0],2)) + " , " +
str(round(myObject.Placement.Base[1],2)) + " , " +
str(round(myObject.Placement.Base[2],2)) + ")] " +
"[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]")
if self.RB_Rotation_X.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[0],4)))
elif self.RB_Rotation_Y.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[1],4)))
elif self.RB_Rotation_Z.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Base[2],4)))
elif self.RB_Direction_D.isChecked():
xD = str(round(myObject.Placement.Base[0],4))
yD = str(round(myObject.Placement.Base[1],4))
zD = str(round(myObject.Placement.Base[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
except Exception:
self.label_00.setText("Error Position_0")
FreeCAD.Console.PrintError("Error Position_0" + "\n" + "or Bad selection" + "\n")
else:
self.groupBox_Rotation.setEnabled(True)
self.SC_Slider_Bar.setMinimum(-360)
self.SC_Slider_Bar.setMaximum(360)
self.DS_Scroll_Bar.setMinimum(-360)
self.DS_Scroll_Bar.setMaximum(360)
self.groupBox_Axis.setTitle("Axis Rotation")
self.RB_Rotation_Z.setText("Rotation(X) Roll") # rotation
self.RB_Rotation_Y.setText("Rotation(Y) Pitch")
self.RB_Rotation_X.setText("Rotation(Z) Yaw")
self.RB_Direction_D.setText("Rotation(D)")
try:
self.label_00.setText("[Rot=(" + str(round(myObject.Placement.Rotation.toEuler()[0],2)) + " , " +
str(round(myObject.Placement.Rotation.toEuler()[1],2)) + " , " +
str(round(myObject.Placement.Rotation.toEuler()[2],2)) + ")] " +
"[Axis=("+str(round(axisX,2))+" , "+ str(round(axisY,2))+" , "+ str(round(axisZ,2))+")]")
if self.RB_Rotation_X.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4)))
elif self.RB_Rotation_Y.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4)))
elif self.RB_Rotation_Z.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4)))
elif self.RB_Direction_D.isChecked():
xD = str(round(myObject.Placement.Rotation.toEuler()[0],4))
yD = str(round(myObject.Placement.Rotation.toEuler()[1],4))
zD = str(round(myObject.Placement.Rotation.toEuler()[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
except Exception:
self.label_00.setText("Error Position_1")
FreeCAD.Console.PrintError("Error Position_0" + "\n" + "or Bad selection" + "\n")
self.DS_Scroll_Bar.setValue(0.0)
# print("on_CB_Position")
def on_CB_Point(self):
global ui
global myObject
global positionMouse
if self.RB_Bond_Box_Center.isChecked(): # axis
# if self.CB_Point.isChecked():
point = Draft.makePoint(myObject.Shape.BoundBox.Center.x, myObject.Shape.BoundBox.Center.y, myObject.Shape.BoundBox.Center.z)
point.ViewObject.PointColor = (1.0,0.0,0.0)
point.Label = "Point_BoundBox_Center"
elif self.RB_Center_Mass.isChecked():
# if self.CB_Point.isChecked():
point = Draft.makePoint(myObject.Shape.CenterOfMass.x, myObject.Shape.CenterOfMass.y, myObject.Shape.CenterOfMass.z)
point.ViewObject.PointColor = (0.0,1.0,0.0)
point.Label = "Point_CenterOfMass"
elif self.RB_Point_Clicked.isChecked():
# if self.CB_Point.isChecked():
point = Draft.makePoint(positionMouse[0], positionMouse[1], positionMouse[2])
point.ViewObject.PointColor = (0.0,0.0,1.0)
point.Label = "Point_positionMouse"
Gui.Selection.addSelection(App.ActiveDocument.getObject(myObject.Name))
FreeCAD.ActiveDocument.recompute()
# ff = ui
# ff.on_RB_CenterRot()
# print("on_CB_Point")
def on_PB_Zero_clicked(self):
global myObject
if (myObject != ""):
try:
pl = App.Placement(App.Vector(0.0,0.0,0.0), App.Rotation(0.0, 0.0, 0.0), App.Vector(0.0, 0.0, 0.0))
myObject.Placement = pl
#FreeCAD.ActiveDocument.recompute()
if self.RB_Rotation_X.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4)))
elif self.RB_Rotation_Y.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4)))
elif self.RB_Rotation_Z.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4)))
elif self.RB_Direction_D.isChecked():
xD = str(round(myObject.Placement.Rotation.toEuler()[0],4))
yD = str(round(myObject.Placement.Rotation.toEuler()[1],4))
zD = str(round(myObject.Placement.Rotation.toEuler()[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
self.label_00.setText("[Rot=(" +str(round(myObject.Placement.Rotation.toEuler()[0],2))+" , "+str(round(myObject.Placement.Rotation.toEuler()[1],2))+" , "+ str(round(myObject.Placement.Rotation.toEuler()[2],2))+")] "+
"[Axis=("+str(round(myObject.Placement.Base.x,2))+" , "+ str(round(myObject.Placement.Base.y,2))+" , "+ str(round(myObject.Placement.Base.z,2))+")]")
self.DS_Scroll_Bar.setValue(0.0)
self.LE_Increment.setText(str(0.0))
#FreeCAD.ActiveDocument.recompute()
Gui.activeDocument().activeView().viewTop()
Gui.SendMsgToActiveView("ViewFit")
except Exception:
self.label_00.setText("Error Zero_0")
FreeCAD.Console.PrintError("Error Zero_0" + "\n" + "or Bad selection" + "\n")
else:
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
self.label_00.setText(" Select one Object")
FreeCAD.Console.PrintError("Select one Object" + "\n")
# print("on_PB_Zero_clicked")
def on_PB_Original_clicked(self):
global ui
global myObject
global originalPlacement
global axisX, axisY, axisZ
global rotAngleX, rotAngleY, rotAngleZ
if (myObject != ""):
try:
rotAngleX = rotAngleY = rotAngleZ = 0.0
myObject.Placement = originalPlacement
self.DS_Scroll_Bar.setValue(0.0)
if self.RB_Rotation_X.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[0],4))) # yaw Z
elif self.RB_Rotation_Y.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[1],4))) # pitch Y
elif self.RB_Rotation_Z.isChecked():
self.LE_Increment.setText(str(round(myObject.Placement.Rotation.toEuler()[2],4))) # roll Z
elif self.RB_Direction_D.isChecked():
xD = str(round(myObject.Placement.Rotation.toEuler()[0],4))
yD = str(round(myObject.Placement.Rotation.toEuler()[1],4))
zD = str(round(myObject.Placement.Rotation.toEuler()[2],4))
self.LE_Increment.setText("(" + xD + ", " + yD + ", " + zD + ")")
ff = ui
ff.on_RB_CenterRot()
self.label_00.setText("[Rot=(" +str(round(myObject.Placement.Rotation.toEuler()[0],2))+" , "+str(round(myObject.Placement.Rotation.toEuler()[1],2))+" , "+ str(round(myObject.Placement.Rotation.toEuler()[2],2))+")] "+
"[Axis=("+str(round(axisX,2))+" , "+ str(round(axisY,2))+" , "+ str(round(axisZ,2))+")]")
#FreeCAD.ActiveDocument.recompute()
except Exception:
self.label_00.setText("Error Original_0")
FreeCAD.Console.PrintError("Error Original_0" + "\n" + "or Bad selection" + "\n")
else:
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
self.label_00.setText(" Select one Object")
FreeCAD.Console.PrintError("Select one Object" + "\n")
# print("on_PB_Original_clicked")
def on_PB_Reset_clicked(self):
global originalObject
global myObject
global valeur
global posX, posY, posZ
global rotAngleX, rotAngleY, rotAngleZ
global axisX, axisY, axisZ
try:
for obj in FreeCAD.ActiveDocument.Objects: # deslectionne
FreeCADGui.Selection.removeSelection(obj)
except Exception:
None
originalObject = myObject = ""
posX = posY = posZ = rotAngleX = rotAngleY = rotAngleZ = 0.0
axisX = axisY = axisZ = 0.0
valeur = 0.0
self.DS_Scroll_Bar.setValue(0.0)
self.LE_Increment.setText(str(0.0))
self.groupBox_Axis.setTitle("Axis Rotation")
self.RB_Rotation_Z.setText("Rotation(X) Roll")
self.RB_Rotation_Y.setText("Rotation(Y) Pitch")
self.RB_Rotation_X.setText("Rotation(Z) Yaw")
self.RB_Direction_D.setText("Rotation(D) Direction")
self.groupBox_Rotation.setEnabled(False)
self.groupBox_Axis.setEnabled(False)
self.groupBox_Pos_Mouse.setEnabled(False)
self.DS_Pos_Mouse_X.setValue(0.0)
self.DS_Pos_Mouse_Y.setValue(0.0)
self.DS_Pos_Mouse_Z.setValue(0.0)
self.CB_Position.setEnabled(False)
self.CB_Position.setChecked(False)
# self.CB_Point.setEnabled(False)
# self.CB_Point.setChecked(False)
self.PB_Point.setEnabled(False)
self.CB_Free.setEnabled(False)
self.CB_Free.setChecked(False)
self.label_00.setStyleSheet("color : #ffffff; background-color: red; font: bold 10px;") # white red bold
self.label_00.setText(" Select one Object")
FreeCAD.Console.PrintError("Select one Object" + "\n")
FreeCAD.Console.PrintMessage("Reset" + "\n")
def on_PB_Quit_clicked(self):
self.vueActive.removeEventCallback("SoMouseButtonEvent",self.click) # desinstalle la fonction souris
FreeCADGui.Selection.removeObserver(s) # desinstalle la fonction residente
self.window.hide() # hide the window and close the macro
FreeCAD.Console.PrintMessage("Quit Rotate_To_Point" + "\n")
###################################################################################################
class SelObserver:
def addSelection(self, document, object, element, position): # Selection
global ui
global sourisPass
global positionMouse
global originalObject
global myObject
global originalPlacement
global posX, posY, posZ
global rotAngleX, rotAngleY, rotAngleZ
global axisX, axisY, axisZ
if sourisPass == 0: # pour un seul passage
sourisPass == 1
sel = FreeCADGui.Selection.getSelection()[0] # select object with getSelection()
positionMouse = position
originalObject = myObject = sel
originalPlacement = sel.Shape.Placement
#longueur = (myObject.Shape.BoundBox.XLength * 0.5) # pour Axis
positionBase = originalObject.Shape.Placement.Base # Placement Vector XYZ
posX = positionBase.x
posY = positionBase.y
posZ = positionBase.z
Yaw = originalObject.Shape.Placement.Rotation.toEuler()[0] # decode angle Euler Yaw
Pitch = originalObject.Shape.Placement.Rotation.toEuler()[1] # decode angle Euler Pitch
Roll = originalObject.Shape.Placement.Rotation.toEuler()[2] # decode angle Euler Roll
rotAngleX = Yaw
rotAngleY = Pitch
rotAngleZ = Roll
axisX = axisY = axisZ = 0.0
ff = ui
ff.DS_Pos_Mouse_X.setValue(positionMouse[0])
ff.DS_Pos_Mouse_Y.setValue(positionMouse[1])
ff.DS_Pos_Mouse_Z.setValue(positionMouse[2])
ff.on_RB_CenterRot()
if ff.CB_Position.isChecked():
ff.groupBox_Rotation.setEnabled(False)
else:
ff.groupBox_Rotation.setEnabled(True)
ff.groupBox_Axis.setEnabled(True)
#ff.groupBox_Pos_Mouse.setEnabled(True)
ff.CB_Position.setEnabled(True)
# ff.CB_Point.setEnabled(True)
ff.PB_Point.setEnabled(True)
ff.CB_Free.setEnabled(True)
ff.label_00.setStyleSheet("Base") # origin system
ff.label_00.setText("[Rot =(" + str(round(rotAngleX,2))+ " , " + str(round(rotAngleY,2)) + " , " + str(round(rotAngleZ,2)) + ")] " +
"[Axis=("+ str(round(axisX,2)) + " , " + str(round(axisY,2)) + " , " + str(round(axisZ,2)) + ")]")
def clearSelection(self,doc): # Si clic sur l'ecran, effacer la selection
global ui
ff = ui
ff.on_PB_Reset_clicked()
###################################################################################################
doc = FreeCAD.ActiveDocument
if doc == None:
doc = FreeCAD.newDocument()
try:
for obj in FreeCAD.ActiveDocument.Objects: # deselectionne
FreeCADGui.Selection.removeSelection(obj)
except Exception:
None
s=SelObserver()
FreeCADGui.Selection.addObserver(s) # installe la fonction en mode resident
if __name__ == "__main__":
MainWindow = QtWidgets.QMainWindow()
MainWindow.setObjectName("__title__") # macro internal Name
ui = Ui_MainWindow()
ui.setupUi(MainWindow)
MainWindow.show()
Example:
Links
The forum feature req: placement - rotate part around its midpoint My macro to Gist mario52a
Version
2020/03/07 ver 00.05.2 : correct the bug translation delete "direction = myObject.Placement.Rotation.multVec(direction)"
2020/03/01 ver 00.05.1 : correct the position of the test "FreeCAD version"
2020/02/29 ver 00.05 : convert to Hdpi (Layout) and add Direction
06/04/2019 ver 00.04 : Python 3
29/03/2018 ver 00.03 : comment the "FreeCAD.ActiveDocument.recompute()" the change value are too slow with complex element in FreeCAD 0.17.... see FC0.17 recompute strange behaviour (regression)
27/03/2017 ver 00.02 : modify the spinbox "Pos" now accept the negative values
05/03/2017 ver 00.01 : add 3 spinbox for displayed the coordinates X Y Z on click mouse
04/03/2017 ver 00.00