Sketcher Contraintes redondantes

From FreeCAD Documentation
Revision as of 13:55, 16 December 2018 by Renatorivo (talk | contribs) (Replaced content with "==Utilisation==")

Sketcher SelectRedondanteContrainte

Emplacement du menu
Sketch → Sketcher tools → Select Redundant Constraints
Ateliers
Sketcher
Raccourci par défaut
Maiusc+Ctrl+R
Introduit dans la version
0.15
Voir aussi
Aucun

Description

Sélectionne les contraintes redondantes d'une esquisse.

Utilisation

  1. Enter edit mode of sketch.
  2. Choose Sketch Sketcher tools Select Redundant Constraints from the top menu.
  3. The redundant constraints of the sketch will be selected.