PartDesign Tor Subtractiv
|
Menu location |
---|
Part Design → Create a subtractive primitive → Subtractive Torus |
Workbenches |
PartDesign |
Default shortcut |
None |
Introduced in version |
- |
See also |
PartDesign CompPrimitiveSubtractive |
Descriere
Inserează un tor substractiv în Corpul activ. Forma sa este scăzută din solidul existent.
În partea stângă: corpul activ (A) afișat în gri și torul substractiv (B) afișat în roșu transparent; rezultatul în partea dreaptă.
Cum se folosește
- Apăsați butonul
Subtractive Torus. Notă: torul substractiv este partea a unei iconițe meniu etichetată Create an additive primitive. După lansarea FreeCAD, Caseta Substractiv este iconița vizibilă în bara de instrumente. Pentru a obține Torul, faceți clic pe săgeata în jos în afară de pictograma vizibilă și selectați Torus subtractiv din meniu.
- Setați parametrii Primitivei și Attachment.
- Click OK.
- O funcționalitate Torus apare sub corpul activ.
Opţiuni
The Torus can be edited after its creation in two ways:
- Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
- Via the Property editor.
Proprietăți
- DateAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
- DateLabel: Label given to the Torus object. Change to suit your needs.
- DateRadius1: Radius of the imaginary orbit around which the circular cross-section revolves. (The distance between the center of the torus and the center of the revolving cross section)
- DateRadius2: Radius of the circular cross-section defining the form of the torus.
- DateAngle1: (labelled V parameter in the Primitive parameters) lower truncation of the torus, parallel to the circular cross section (-180° in a full torus). A bug in the sources causes unexpected results at changing Angle1.
- DateAngle2: (unlabelled in the Primitive parameters) upper truncation of the ellipsoid, parallel to the circular cross section (180° in a full torus). A bug in the sources causes unexpected results at changing Angle2.
- DateAngle3: (labelled U parameter in the Primitive parameters) angle of rotation of the circular cross section (360° in a full torus).