Arch Barra de Refuerzo de Estribo
Arch Rebar Stirrup |
Menu location |
---|
Arch → Rebar tools |
Workbenches |
Arch |
Default shortcut |
None |
See also |
Helical Rebar |
This command is part of the Reinforcement AddOn, that you can install via menu Tools → Addons Manager |
Descripción
La herramienta Stirrup Rebar permite al usuario crear una barra de refuerzo de estribo en el elemento estructural.
Como utilizar
- Crear un elemento structure
- Seleccione cualquier cara de la estructura
- A continuación, seleccione Stirrup Rebar desde las herramientas de la barra de refuerzo
- Aparecerá un panel de tareas en el lado izquierdo de la pantalla, como se muestra a continuación 250px
- Seleccione la orientación deseada
- Proporcione las entradas como cubierta izquierda, cubierta derecha, cubierta superior, parte inferior, cubierta frontal, ángulo doblado, factor doblado, redondeo y diámetro de la barra de refuerzo
- Seleccione el modo de distribución, ya sea cantidad o espaciado
- Si se selecciona el espaciado, un usuario también puede optar por espaciado personalizado
- La selección de la cara seleccionada se usa para verificar o cambiar la cara de la distribución de barras de refuerzo
- Haga clic en OK o Apply para generar las barras de refuerzo
- Haga clic en Cancel para salir del panel de tareas
Properties
- DatosFront Cover: The distance between rebar and selected face.
- DatosRight Cover: The distance between the right end of the rebar to right face of the structure.
- DatosLeft Cover: The distance between the left end of the rebar to the left face of the structure.
- DatosBottom Cover: The distance between rebar from the bottom face of the structure.
- DatosTop Cover: The distance between rebar from the top face of the structure.
- DatosBent Angle: Bent angle defines the angle at the ends of a stirrup.
- DatosBent Factor: Bent Factor defines length of stirrup end.
- DatosAmount: The amount of rebars.
- DatosSpacing: The distance between the axes of each bar.
Scripting
The Stirrup Rebar tool can by used in macros and from the python console by using the following function:
makeStirrup(LeftCover, RightCover, TopCover, BottomCover, FrontCover, BentAngle, BentFactor, Diameter, Rounding, AmountSpacingCheck, AmountSpacingValue, Structure, Facename)
- Adds a Stirrup reinforcing bar object to the given structural object.
- If no Structure and Facename is given, it will take user selected face as input.
- Here CoverAlong argument is having type tuple.
- Returns the new Rebar object.
Example: Creating Stirrup rebar.
import Arch, Stirrup
structure = Arch.makeStructure(length=1000.0, width=400.0, height=400.0)
structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
rebar = Stirrup.makeStirrup(20, 20, 20, 20, 20, 135, 4, 8, 2, True, 10, structure, "Face6")
Changing properties of Stirrup rebar.
import Stirrup
Stirrup.editStirrup(rebar, 20, 20, 20, 20, 50, 90, 4, 8, 2, True, 6, structure, "Face6")