FEM: Vincolo temperatura

From FreeCAD Documentation
Revision as of 18:53, 6 April 2017 by Renatorivo (talk | contribs) (Created page with "==Descrizione== Crea un vincolo FEM per una condizione limite di temperatura.")

Vincolo temperatura

Posizione nel menu
FEM → Vincolo temperatura
Ambiente
FEM
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Tutorial FEM

Descrizione

Crea un vincolo FEM per una condizione limite di temperatura.

Use

  1. Click on or choose FEM Constraint temperature from the top menu.
  2. Select in the 3D-view the object(s) the constraint should be applied to, which can be:
    1. vertices (corners)
    2. edges
    3. faces
  3. Enter a temperature to apply to the object.

Limitations

Notes

  1. The temperature constraint uses the *BOUNDARY card in CalculiX. the temperature constraint is explained at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node163.html