FCGear: Cremagliera cicloidale
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
Cremagliera cicloidale |
Posizione nel menu |
---|
Gear → Cycloid Rack |
Ambiente |
FCGear |
Avvio veloce |
None |
Introdotto nella versione |
1.0 |
Vedere anche |
FCGear: Ingranaggio cicloidale |
Descrizione
Cremagliere cicloidali da sinistra a destra: ingranaggio dritto, ingranaggio elicoidale, ingranaggio elicoidale doppio
Utilizzo
- Switch to the FCGear Workbench.
- There are several ways to invoke the command:
- Press the Cycloid Rack button in the toolbar.
- Select the Gear → Cycloid Rack option from the menu.
- Change the gear parameter to the required conditions (see Properties).
Proprietà
Un oggetto FCGear CycloidRack deriva da un oggetto Part Feature e ne eredita tutte le proprietà. Ha inoltre le seguenti proprietà aggiuntive:
accuracy
- Datinumpoints (
Integer
): Default is15
. Number of points for spline.
base
- Datiadd_endings (
bool
): Iftrue
(default), then the total length of the rack is teeth * pitch. Iffalse
, then the rack starts with a tooth-flank. - Datiheight (
Length
): Default is5 mm
. Value of the gear width. - Datiteeth (
Integer
): Default is15
. Number of teeth. - Datithickness (
Length
): Default is5 mm
. Thickness of the uncut part of the rack.
computed
- Datitransverse_pitch (
Length
): (read-only) Pitch in the transverse plane.
cycloid
- Datiinner_diameter (
Float
): Default is7.5
. Diameter of the rolling circle of hypocycloid, normalized by the Datimodule (see Notes). - Datiouter_diameter (
Float
): Default is7.5
. Diameter of the rolling circle of epicycloid, normalized by the Datimodule (see Notes).
fillets
- Datihead_fillet (
Float
): Default is0
. - Datiroot_fillet (
Float
): Default is0
.
helical
- Datibeta (
Angle
): Default is0 °
. With the helix angle β a helical gear is created (positive value → rotation direction right, negative value → rotation direction left). - Datidouble_helix (
Bool
): Default isfalse
,true
creates a double helix gear (see Notes).
involute
- Datimodule (
Length
): Default is1 mm
. For racks the module equals the pitch and so is the distance between corresponding points on adjacent teeth (see Notes).
precision
- Datisimplified (
Bool
): Default isfalse
. Iftrue
the rack is drawn with a constant number of teeth to avoid topological renaming.
tolerance
- Daticlearance (
Float
): Default is0.25
(see Notes). - Datihead (
Float
): Default is0
. Additional length of the tip of the teeth, normalized by the Datimodule.
version
- Dativersion (
String
):
Note
Vedere Ingranaggio cicloidale.
Formule utili
Vedere Ingranaggio cicloidale.