Translations:Workarounds/30/en

From FreeCAD Documentation

|- | 8 | Select which part of the sketch to pad |

  • Select edges from the sketch and create a SubLink or a SubShapeBinder and pad that new object
  • Pad a complete sketch located on the existing face of the model in the opposite direction (towards the existing shape) so that only new faces are created. Then it is possible to select these faces individually and pad them. This method should be used with caution since unnecessary 3D operations may lead to unexpected errors. Thus, it is recommended to use the previous workaround instead.
  • Link Branch - Export Single Geometry and Export Multiple Geometries tools or automatic SubShapeBinder created when edges forming a closed loop are selected from the sketch before padding