Translations:TechDraw FaceCenterLine/24/en

From FreeCAD Documentation
  • Orientation:
    • Vertical: Forces the centerline vertical. Ignored for 2PointCenterLines.
    • Horizontal: Forces the centerline horizontal. Ignored for 2PointCenterLines.
    • Aligned: Not available for FaceCenterLines. Forces the centerline to follow the general direction of the selected edges for 2LineCenterLines. Ignored for 2PointCenterLines.
  • Shift Horizontal: Moves the centerline left or right of its normal position.
  • Shift Vertical: Moves the centerline up or down from its normal position.
  • Rotate: Rotates the centerline around its midpoint (degrees. + counterclockwise, - clockwise).
  • Extend By: Makes the centerline longer by this amount.
  • Color: The color of the centerline.
  • Weight: The width of the centerline.
  • Style: The linestyle of the centerline. The options are:
    • Continuous
    • Dash
    • Dot
    • DashDot
    • DashDotDot