Translations:SheetMetal Workbench/9/en

From FreeCAD Documentation
  • Bend: extends a wall from a side face of the metal sheet. Properties can be edited in the Data tab:
    • Dataangle: Bend angle.
    • Dataextend1: Extends the wall on the left side.
    • Dataextend2: Extends the wall on the right side.
    • Datagap1: Gap from the left side.
    • Datagap2: Gap from the right side.
    • Datainvert: Invert bend direction.
    • Datalength: Length of the wall.
    • Datamiterangle1: Bend miter angle on the left side.
    • Datamiterangle2: Bend miter angle on the right side.
    • Dataradius: Bend radius.
    • Datarelief Type: Rectangle or Round. Enabled only when a gap value is set.
    • Datareliefd: Relief depth. Enabled only when a gap value is set.
    • Datareliefw: Relief width. Enabled only when a gap value is set.
    • Datakfactor: K factor (also known as neutral factor) for the bend. Used to calculate bend allowance when unfolding.
    • Dataunfold: False (default) or True. If true, unfolds the bend.
  • Extrude: extends a face along normal. Properties can be edited in the Data tab:
    • Datagap1: Gap from the left side.
    • Datagap2: Gap from the right side.
    • Datalength: Length of the wall.
  • Unfold: flattens folded sheet metal object and generates a solid and a sketch. The Unfold objects are not parametrically linked to the model; if edits are made to the model, the Unfold operation needs to be redone.