Translations:PartDesign MultiTransform/56/en

From FreeCAD Documentation
  1. Create a Body and add a sketch on one of its base planes.
  2. In the sketch create geometry for one quadrant of the part (i.e. the upper right quadrant).
    • Note that the constraints must also only cover a quarter of the part, e.g. instead of the full dimension of 150mm enter 150/2mm or 75mm.
    • Make sure the sketch is closed by adding lines along the vertical and horizontal axes.
  3. Extrude the part with PartDesign Pad.
  4. Select PartDesign MultiTransform.
  5. The task dialog opens.
  6. The last feature of the Body is already selected. Since we want to mirror that feature we can ignore the Add feature and Remove feature buttons.
  7. Right-click in the Transformations field and select Add mirrored transformation from the context menu.
  8. For the Plane select Vertical sketch axis.
  9. If the Update view checkbox is checked, you should now see the part mirrored about one axis.
  10. Again select Add mirrored transformation from the context menu of the Transformations field.
  11. Now for the Plane select Horizontal sketch axis.
  12. Press the OK button to finish.
  13. To remove the edges along the axes of symmetry in the final result, set the DataRefine property of the new feature to true in the Property editor.