Translations:PartDesign Fillet/30/ro

From FreeCAD Documentation
  • Select a single or multiple edges or a face on an object, then start the tool either by clicking its icon or going into the menu. In case you selected a face all its edges are respected for filleting.
  • In Fillet parameters in the TaskPanel, set the fillet radius either by entering the value, or by clicking on the up/down arrows. The applied fillet is shown in real time.
  • If you want to add more edges or faces click first the Add ref button and then select the edge or the face.
  • If you want to remove edges or faces click the Remove ref button. All edges and faces being previously selected are highlighted in purple. Select the edge or the face to be removed.
  • Click pe OK pentru validare.
  • Pentru un lanț de muchii tangențial una cu celălaltă, poate fi selectată o singură margine; rotunjirea se va propaga de-a lungul lanțului.
  • Pentru a edita rotunjirea după validarea funcției, fie faceți dublu clic pe eticheta Fillet din arborescența Project, fie faceți clic dreapta pe el și selectați Edit Fillet.