Sketcher: Oggetto schizzo
Introduzione
Un Sketcher SketchObject, o formalmente un Sketcher::SketchObject
, è l'elemento base per creare oggetti 2D con l'ambiente Sketcher.
Sketcher::SketchObject
deriva da Part Part2DObject, il che significa che è un oggetto Part Feature specializzato per la geometria 2D. Come Part2DObject, anche SketchObject può essere collegato a piani e facce. Inoltre, SketchObject è in grado di gestire i vincoli geometrici delle linee e delle curve disegnate al suo interno.
Diagramma semplificato delle relazioni tra gli oggetti principali in FreeCAD. La classe Sketcher::SketchObject
è specializzata per le forme 2D e inoltre può gestire i vincoli.
Utilizzo
- Passare all'ambiente Sketcher.
- Premere Nuovo schizzo.
- Selezionare un orientamento: piano XY, piano XZ o piano YZ. Opzionalmente scegliere anche Direzione inversa, e assegnare un valore di Offset.
- Premere OK.
Sebbene SketchObject possa essere utilizzato da solo per disegnare su un piano, viene comunemente utilizzato insieme a PartDesign per creare solidi estrusi.
- Passare in PartDesign.
- Premere Crea un corpo.
- Premere Crea uno schizzo.
- Selezione della funzione: piano XY (piano base), piano XZ (piano base) o piano YZ (piano base).
- Premere OK.
Proprietà
Vedere Proprietà per tutti i tipi di proprietà che possono avere gli oggetti con script.
Un Sketcher SketchObject (classe Sketcher::SketchObject
) deriva da un Part Part2DObject (Part::Part2DObject
), quindi condivide tutte le proprietà di quest'ultimo.
Oltre alle proprietà descritte in Part Part2DObject, il corpo di PartDesign ha le seguenti proprietà nell'editor delle proprietà.
Dati
Sketch
- Dati (Hidden)Geometry (
GeometryList
): a list of Part geometries that exist inside the sketch. - DatiConstraints: named constraints, if they exist; otherwise it is an empty list
[]
. - DatiExternal Geometry (
LinkSubList
): a list of Part geometries outside this Sketch that are used for reference. - Dati (Hidden)Fully Constrained (
Bool
): (read-only) iftrue
the sketch is fully constrained.
Vista
Auto Constraints
- VistaAutoconstraints: se è
true
prova ad impostare i vincoli quando viene disegnata la geometria.
- VistaAutoconstraints (
Bool
): iftrue
constraints are automatically added when geometry is drawn. - VistaAvoid Redundant (
Bool
): iftrue
redundant auto-constraints are avoided.
Grid
- Vista (Hidden)Grid Auto Size (
Bool
): iftrue
the grid is resized based on the boundingbox of the geometry of the sketch. - VistaGrid Size (
Length
): the size of the spacing of the local grid lines in the 3D view; it defaults to10 mm
. - VistaGrid Snap (
Bool
): iftrue
the grid can be used to snap points. - VistaGrid Style (
Enumeration
): the style of the grid lines;Dashed
(default) orLight
. - VistaShow Grid (
Bool
): iftrue
a grid local to the object will be displayed in the 3D view. This grid is independent of the Draft Grid. - VistaShow Only In Edit Mode (
Bool
): iftrue
the grid is only displayed while the sketch is being edited. - VistaTight Grid (
Bool
): iftrue
the local grid will be localized around the origin of the shape, otherwise it will extend itself more. - Vistamax Number Of Lines (
Integer
): the maximum number of lines in the grid.
Visibility automation
Visibility automation
- VistaEditing Workbench: normalmente
SketcherWorkbench
, è il nome dell'ambiente da attivare durante la modifica dello schizzo. - VistaHide Dependent: se è
true
tutti gli oggetti che dipendono dallo schizzo vengono nascosti quando si apre lo schizzo. - VistaRestore Camera: se è
true
la posizione della telecamera viene salvata prima di aprire lo schizzo e viene ripristinata quando lo si chiude. - VistaShow Links: se è
true
tutti gli oggetti utilizzati nei collegamenti alla geometria esterna vengono visualizzati quando si apre lo schizzo. - VistaShow Support: se è
true
tutti gli oggetti a cui è associato questo schizzo vengono mostrati quando si apre lo schizzo.
Script
Vedere anche: Script di base per FreeCAD, e script di oggetti.
Vedere Part Feature per le informazioni generali.
Un oggetto Sketcher SketchObject viene creato con il metodo addObject()
del documento.
import FreeCAD as App
doc = App.newDocument()
obj = App.ActiveDocument.addObject("Sketcher::SketchObject", "Sketch")
obj.Label = "Custom label"
For Python subclassing you should create the Sketcher::SketchObjectPython
object.
import FreeCAD as App
doc = App.newDocument()
obj = App.ActiveDocument.addObject("Sketcher::SketchObjectPython", "CustomSketch")
obj.Label = "Custom label"
- General: Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry
- Sketcher constraints:
- Dimensional constraints: Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock
- Geometric constraints: Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block
- Other constraints: Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher visual: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
- Cuore: App DocumentObject
- Base: App FeaturePython, App GeoFeature, Part Feature, Mesh Feature, Fem FemMeshObject
- Forme interne: Part TopoShape, Mesh MeshObject, Fem FemMesh
- Struttura: App DocumentObjectGroup (Std Group), App Part (Std Part), App Link
- Derivate: Part Part2DObject, Sketcher SketchObject, PartDesign Body, PartDesign Feature
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub