Sketcher: Seleziona gli elementi con gradi di libertà

From FreeCAD Documentation
This page is a translated version of the page Sketcher SelectElementsWithDoFs and the translation is 30% complete.
Outdated translations are marked like this.

Seleziona il Risolutore dei gradi di libertà

Posizione nel menu
Sketch → Strumenti → Seleziona gli elementi con gradi di libertà
Ambiente
Sketcher
Avvio veloce
Nessuno
Introdotto nella versione
0.18
Vedere anche
Nessuno

Descrizione

Questo strumento ha lo scopo di aiutare a vincolare completamente uno schizzo evidenziando in verde gli elementi dello schizzo con residui gradi di libertà (DoF).

If such elements exist in a sketch the Solver messages section of the Sketcher Dialog displays this message:

  • Under constrained: n DoF(s)

Where n is the remaining number of degrees of freedom. Clicking the underlined text will select the under-constrained elements.

Please note that a sketch can also have under-constrained elements if one of these messages is displayed:

  • Redundant constraints: (#, #, #)
  • Over-constrained: (#, #, #)

Utilizzo

  1. There are several ways to invoke the tool:
    • Click the underlined text in the Sketcher Dialog as described above.
    • Select the Sketch → Sketcher tools → Select unconstrained DoF option from the menu.
    • Use the keyboard shortcut: Z then F.
  2. The under-constrained sketch elements are selected.
  3. Optionally click in an empty area in the 3D view to clear the selection.