Translations:Toothbrush Head Stand/40/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "* Utiliser la contrainte de longueur 32px '''Length''' pour les positionner à 20mm des angles.")
 
No edit summary
Line 1: Line 1:
* Utiliser la contrainte de longueur [[File:Constraint_Length.png|32px]] [[Constraint_Length|'''Length''']] pour les positionner à 20mm des angles.
* Utiliser la contrainte de longueur [[File:Constraint_Length.png|32px]] [[Sketcher ConstrainDistance/fr|'''Contrainte dimensionnelle ''']] pour les positionner à 20mm des angles.

Revision as of 07:58, 8 October 2018

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Toothbrush Head Stand)
* Click on [[File:Constraint_Length.png|32px]] [[Sketcher_ConstrainDistance|'''Distance''']].
* Click on a center of a circle.
* Click on a magenta line.
* Set distance (20mm from each side).