*Radius 1 - radius of the arc or circle defining the lower face
* '''Radius 1:''' radius of the arc or circle defining the lower face
*Radius 2 - radius of the arc or circle defining the upper face
* '''Radius 2:''' radius of the arc or circle defining the upper face
*Height- the height of the Part Cone
* '''Height:''' the height of the Part Cone
*Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
* '''Angle:''' the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
|}
|}
Revision as of 15:48, 7 February 2020
Options
Cone
Radius 1: radius of the arc or circle defining the lower face
Radius 2: radius of the arc or circle defining the upper face
Height: the height of the Part Cone
Angle: the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.