Translations:PartDesign Bearingholder Tutorial I/22/ro

From FreeCAD Documentation
Revision as of 08:29, 8 September 2018 by Luc (talk | contribs) (Created page with "thumb|400px|right|text-top|Sketch of the cut-away at the side of the pad Next we want to cut away some material where the sealing rings are, because...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Sketch of the cut-away at the side of the pad

Next we want to cut away some material where the sealing rings are, because their outer diameter is much less than the bearing's. The easiest way to create the sketches is to select the sketch of the pad and then choose "Duplicate selection" from the edit menu. You can then remap the sketch to the side of the pad, and modify it as shown in the picture.