Translations:Manual:Preparing models for 3D printing/39/en

From FreeCAD Documentation
Revision as of 09:25, 18 March 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  • Once again, make an array. Select the Pocket object, and press the Array button. Set the Copies number to 1 and the offset to -2mm in the Z direction. Move the placement of the array by 2mm in the Z direction. Our two operations are now done: