Translations:Manual:Modeling for product design/28/zh-cn: Difference between revisions

From FreeCAD Documentation
(Created page with "* 注意,当你锁定草图中所有物体的位置和尺寸时,它就会变得完全约束。这总是让你呆在安全的一面。你现在可以改变第一个草图,我们之后做的所有事情都会保持严密。 * 退出编辑模式,选择这个新的草图,创建一个厚度为 2.7 毫米的 16px :")
 
(No difference)

Latest revision as of 07:16, 14 November 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manual:Modeling for product design)
* Notice how, once again, when you lock the position and dimension of everything in your sketch, it becomes fully constrained. This always keeps you on the safe side. You could change the first sketch now, everything we did afterwards would keep tight.
* Leave edit mode, select this new sketch, and create a [[Image:PartDesign_Pad.svg|16px]] [[PartDesign_Pad|Pad]] of 2.7mm:
  • 注意,当你锁定草图中所有物体的位置和尺寸时,它就会变得完全约束。这总是让你呆在安全的一面。你现在可以改变第一个草图,我们之后做的所有事情都会保持严密。
  • 退出编辑模式,选择这个新的草图,创建一个厚度为 2.7 毫米的