Translations:Manual:Modeling for product design/19/zh-cn: Difference between revisions

From FreeCAD Documentation
(Created page with "* 我们现在将根据底面约束矩形。为了做到这一点,我们需要使用 16px 外部几何 工具 "导入" 面的一些边缘。在底面的两条垂直线上使用此工具:")
 
(No difference)

Latest revision as of 07:03, 14 November 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manual:Modeling for product design)
* We will now constrain the rectangle in relation to the bottom face. To do this, we need to "import" some edges of the face with the [[Image:Sketcher_External.svg|16px]] [[Sketcher_External|External geometry]] tool. Use this tool on the two vertical lines of the bottom face:
  • 我们现在将根据底面约束矩形。为了做到这一点,我们需要使用 外部几何 工具 "导入" 面的一些边缘。在底面的两条垂直线上使用此工具: