Translations:Manual:Modeling for product design/17/zh-cn: Difference between revisions

From FreeCAD Documentation
(Created page with "* 现在,我们将使用 16px Pocket 工具来挖掘块的内部,这是 PartDesign 版本的 Part Cut。为了创建一个口袋,我们将在块的底部面创建一个草图,这将用于移除块的一部分。 * 在选中底部面的情况下,按下 16px 新建草图 按钮。 * 在面上画一个矩形。")
 
(No difference)

Latest revision as of 07:03, 14 November 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manual:Modeling for product design)
* We will now carve the inside of the block, using the [[Image:PartDesign_Pocket.svg|16px]] [[PartDesign_Pocket|Pocket]] tool, which is the PartDesign version of [[Part Cut]]. To make a pocket, we will create a sketch on the bottom face of our block, which will be used to remove a part of the block.
* With the bottom face selected, press the [[Image:Sketcher_NewSketch.svg|16px]] [[Sketcher_NewSketch|New sketch]] button.
* Draw a rectangle on the face.
  • 现在,我们将使用 Pocket 工具来挖掘块的内部,这是 PartDesign 版本的 Part Cut。为了创建一个口袋,我们将在块的底部面创建一个草图,这将用于移除块的一部分。
  • 在选中底部面的情况下,按下 新建草图 按钮。
  • 在面上画一个矩形。