Translations:Manual:Modeling for product design/16/zh-cn: Difference between revisions

From FreeCAD Documentation
(Created page with "'''Pad''' 的行为很像我们在上一章中使用的 Extrude 工具。然而,它们之间还是有一些差异的,主要的差异在于,Pad 不能被移动。它永远附着在它的草图上。如果你想改变 Pad 的位置,你必须移动基础草图。在当前的上下文中,我们希望确保没有任何东西会移出位置,这是一种额外的安全保障。")
 
(No difference)

Latest revision as of 06:57, 14 November 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manual:Modeling for product design)
The '''Pad''' behaves very much like the [[Part Extrude|Extrude]] tool that we used in the previous chapter. There are a couple of differences, though, the main one being that a pad cannot be moved. It is attached forever to its sketch. If you want to change the position of the pad, you must move the base sketch. In the current context, where we want to be sure nothing will move out of position, this is an additional security.

Pad 的行为很像我们在上一章中使用的 Extrude 工具。然而,它们之间还是有一些差异的,主要的差异在于,Pad 不能被移动。它永远附着在它的草图上。如果你想改变 Pad 的位置,你必须移动基础草图。在当前的上下文中,我们希望确保没有任何东西会移出位置,这是一种额外的安全保障。