Jump to content

Editing Translations:Manual:All workbenches at a glance/12/zh-cn

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manual:All workbenches at a glance)
{| class="wikitable" style="width:100%"
! Tool
! Description
! Tool
! Description
|-
| [[Image:Sketcher_CreatePoint.svg|32px]] [[Sketcher_CreatePoint|Point]]
| Draws a point
| [[Image:Sketcher_CreatePolyline.svg|32px]] [[Sketcher_CreatePolyline|Polyline]]
| Draws a line made of multiple line segments
|-
| [[Image:Sketcher_Line.svg|32px]] [[Sketcher_CreateLine|Line]]
| Draws a line segment from 2 points
| [[Image:Sketcher_Arc.svg|32px]] [[Sketcher_CreateArc|Arc]]
| Draws an arc segment from the center, radius, start angle and end angle
|-
| [[Image:Sketcher Create3PointArc.svg|32px]] [[Sketcher_Create3PointArc|Arc 3 points]]
| Draws an arc segment from two endpoints and another point on the circumference
| [[Image:Sketcher_CreateArcOfEllipse.svg|32px]] [[Sketcher_CreateArcOfEllipse|Arc of ellipse]]
| Creates an arc of ellipse
|-
| [[Image:Sketcher_CreateArcOfHyperbola.svg|32px]] [[Sketcher_CreateArcOfHyperbola|Arc of hyperbola]]
| Creates an arc of hyperbola
| [[Image:Sketcher_CreateArcOfParabola.svg|32px]] [[Sketcher_CreateArcOfParabola|Arc of parabola]]
| Creates an arc of parabola
|-
| [[Image:Sketcher_Circle.svg|32px]] [[Sketcher_CreateCircle|Circle]]
| Draws a circle from the center and radius
| [[Image:Sketcher Create3PointCircle.svg|32px]] [[Sketcher_Create3PointCircle|Circle 3 points]]
| Draws a circle from three points on the circumference
|-
| [[Image:Sketcher_CreateEllipseByCenter.svg|32px]] [[Sketcher_CreateEllipseByCenter|Ellipse]]
| Draws an ellipse by a center point, major radius point and minor radius point
| [[Image:Sketcher_CreateEllipseBy3Points.svg|32px]] [[Sketcher_CreateEllipseBy3Points|Ellipse 3 points]]
| Draws an ellipse by major diameter (2 points) and minor radius point
|-
| [[Image:Sketcher_CreateRectangle.svg|32px]] [[Sketcher_CreateRectangle|Rectangle]]
| Draws a rectangle from 2 opposite points
| [[Image:Sketcher_CreateRectangle_Center.svg|32px]] [[Sketcher_CreateRectangle_Center|Centered rectangle]]
| Creates a centered rectangle
|-
| [[Image:Sketcher_CreateOblong.svg|32px]] [[Sketcher_CreateOblong|Rounded rectangle]]
| Creates a rounded rectangle
| [[Image:Sketcher_CreateTriangle.svg|32px]] [[Sketcher_CreateTriangle|Triangle]]
| Draws a regular triangle inscribed in a construction geometry circle
|-
| [[Image:Sketcher_CreateSquare.svg|32px]] [[Sketcher_CreateSquare|Square]]
| Draws a regular square inscribed in a construction geometry circle
| [[Image:Sketcher_CreatePentagon.svg|32px]] [[Sketcher_CreatePentagon|Pentagon]]
| Draws a regular pentagon inscribed in a construction geometry circle
|-
| [[Image:Sketcher_CreateHexagon.svg|32px]] [[Sketcher_CreateHexagon|Hexagon]]
| Draws a regular hexagon inscribed in a construction geometry circle
| [[Image:Sketcher_CreateHeptagon.svg|32px]] [[Sketcher_CreateHeptagon|Heptagon]]
| Draws a regular heptagon inscribed in a construction geometry circle
|-
| [[Image:Sketcher_CreateOctagon.svg|32px]] [[Sketcher_CreateOctagon|Octagon]]
| Draws a regular octagon inscribed in a construction geometry circle
| [[Image:Sketcher_CreateRegularPolygon.svg|32px]] [[Sketcher_CreateRegularPolygon|Regular polygon]]
| Creates a regular polygon. The number of sides can be specified
|-
| [[Image:Sketcher_CreateSlot.svg|32px]] [[Sketcher_CreateSlot|Slot]]
| Creates a slot
| [[Image:Sketcher_CreateArcSlot.svg|32px]] [[Sketcher_CreateArcSlot|Arc slot]]
| Creates an arc slot
|-
| [[Image:Sketcher_CreateBSpline.svg|32px]] [[Sketcher_CreateBSpline|B-spline by control points]]
| Creates a B-spline curve by control points
| [[Image:Sketcher_CreatePeriodicBSpline.svg|32px]] [[Sketcher_CreatePeriodicBSpline|Periodic B-spline by control points]]
| Creates a periodic (closed) B-spline curve by control points.
|-
| [[Image:Sketcher_CreateBSplineByInterpolation.svg|32px]] [[Sketcher_CreateBSplineByInterpolation|B-spline by knots]]
| Creates a B-spline curve by knot points
| [[Image:Sketcher_CreatePeriodicBSplineByInterpolation.svg|32px]] [[Sketcher_CreatePeriodicBSplineByInterpolation|Periodic B-spline by knots]]
| Creates a periodic (closed) B-spline curve by knot points
|-
| [[Image:Sketcher_ToggleConstruction.svg|32px]] [[Sketcher_ToggleConstruction|Construction mode]]
| Toggles an element to/from construction mode
| [[Image:Sketcher_Dimension.svg|32px]] [[Sketcher_Dimension|Dimension]]
| Based on the current selection, it offers appropriate dimensional/geometric constraints
|-
| [[Image:Sketcher_ConstrainDistanceX.svg|32px]] [[Sketcher_ConstrainDistanceX|Horizontal distance]]
| Fixes the horizontal distance between two points or the endpoints of a line
| [[Image:Sketcher_ConstrainDistanceY.svg|32px]] [[Sketcher_ConstrainDistanceY|Vertical distance]]
| Fixes the vertical distance between two points or the endpoints of a line
|-
| [[Image:Sketcher_ConstrainDistance.svg|32px]] [[Sketcher_ConstrainDistance|Distance]]
| Fixes the length of a line, the distance between two points, the perpendicular distance from a point to a line, the distance between edges of two circles/arcs or between a circle/arc and a line, or the length of an arc
| [[Image:Sketcher_ConstrainRadiam.svg|32px]] [[Sketcher_ConstrainRadiam|Auto radius/diameter]]
| Fixes the radius of arcs and B-spline weight circles, and the diameter of circles
|-
| [[Image:Sketcher_ConstrainRadius.svg|32px]] [[Sketcher_ConstrainRadius|Radius]]
| Fixes the radius of circles, arcs and B-spline weight circles
| [[Image:Sketcher_ConstrainDiameter.svg|32px]] [[Sketcher_ConstrainDiameter|Diameter]]
| Fixes the diameter of circles and arcs.
|-
| [[Image:Sketcher_ConstrainAngle.svg|32px]] [[Sketcher_ConstrainAngle|Angle]]
| Fixes the angle between two edges, the angle of a line with the horizontal axis of the sketch, or the aperture angle of a circular arc
| [[Image:Sketcher_ConstrainLock.svg|32px]] [[Sketcher ConstrainLock|Lock]]
| Constrains the selected item by setting vertical and horizontal distances relative to the origin, thereby locking the location of that item
|-
| [[Image:Sketcher_ConstrainCoincidentUnified.svg|32px]] [[Sketcher_ConstrainCoincidentUnified|Coincident (unified)]]
| Creates a coincident constraint between points, fixes points on edges or axes or creates a concentric constraint
| [[Image:Sketcher_ConstrainHorVer.svg|32px]] [[Sketcher_ConstrainHorVer|Horizontal/vertical]]
| Constrains lines or pairs of points to be horizontal or vertical, whichever is closest to the current alignment
|-
| [[Image:Sketcher_ConstrainHorizontal.svg|32px]] [[Sketcher_ConstrainHorizontal|Horizontal]]
| Constrains the selected lines or polyline elements to a true horizontal orientation. More than one object can be selected before applying this constraint
| [[Image:Sketcher_ConstrainVertical.svg|32px]] [[Sketcher_ConstrainVertical|Vertical]]
| Constrains the selected lines or polyline elements to a true vertical orientation. More than one object can be selected before applying this constraint.
|-
| [[Image:Sketcher_ConstrainParallel.svg|32px]] [[Sketcher_ConstrainParallel|Parallel]]
| Constrains lines to be parallel.
| [[Image:Sketcher_ConstrainPerpendicular.svg|32px]] [[Sketcher_ConstrainPerpendicular|Perpendicular]]
| Constrains two lines to be perpendicular
|-
| [[Image:Sketcher_ConstrainTangent.svg|32px]] [[Sketcher_ConstrainTangent|Tangent or collinear]]
| Creates a tangent constraint between two selected entities or a co-linear constraint between two line segments
| [[Image:Sketcher ConstrainEqual.svg|32px]] [[Sketcher ConstrainEqual|Equal length]]
| Constrains two selected entities equal to one another. If used on circles or arcs their radii will be set equal
|-
| [[Image:Sketcher_ConstrainSymmetric.svg|32px]] [[Sketcher_ConstrainSymmetric|Symmetric]]
| Constrains two points to be symmetrical around a line or axis, or around a third point
| [[Image:Sketcher_ConstrainBlock.svg|32px]] [[Sketcher_ConstrainBlock|Block]]
| Blocks edges in place with a single constraint. It is mainly intended for B-splines
|-
| [[Image:Sketcher_CreateFillet.svg|32px]] [[Sketcher_CreateFillet|Fillet]]
| Creates a fillet between two non-parallel edges
| [[Image:Sketcher_CreateChamfer.svg|32px]] [[Sketcher_CreateChamfer|Chamfer]]
| Creates a chamfer between two non-parallel edges
|-
| [[Image:Sketcher_Trimming.svg|32px]] [[Sketcher_Trimming|Trim]]
| Trims an edge at the nearest intersections with other edges
| [[Image:Sketcher_Split.svg|32px]] [[Sketcher_Split|Split]]
| Splits an edge while transferring most constraints
|-
| [[Image:Sketcher_Extend.svg|32px]] [[Sketcher_Extend|Extend]]
| Extends or shortens a line or an arc to an arbitrary location, or to a target edge or point
| [[Image:Sketcher_External.svg|32px]] [[Sketcher_External|External geometry]]
| Projects edges and/or vertices belonging to objects outside the sketch onto the sketch plane
|-
| [[Image:Sketcher_Projection.svg|32px]] [[Sketcher_Projection|Projection]]
| Projects edges and/or vertices belonging to objects outside the sketch onto the sketch plane.
| [[Image:Sketcher_Intersection.svg|32px]] [[Sketcher_Intersection|Intersection]]
| Intersects faces and/or edges belonging to objects outside the sketch with the sketch plane.
|-
| [[Image:Sketcher_CarbonCopy.svg|32px]] [[Sketcher_CarbonCopy|Carbon copy]]
| Copies all geometry and constraints from another sketch into the active sketch
| [[Image:Sketcher_SelectOrigin.svg|32px]] [[Sketcher_SelectOrigin|Select origin]]
| Selects the origin of the sketch
|-
| [[Image:Sketcher_SelectHorizontalAxis.svg|32px]] [[Sketcher_SelectHorizontalAxis|Select horizontal axis]]
| Selects the horizontal axis of the sketch
| [[Image:Sketcher_SelectVerticalAxis.svg|32px]] [[Sketcher_SelectVerticalAxis|Select vertical axis]]
| Selects the vertical axis of the sketch
|-
| [[Image:Sketcher_Translate.svg|32px]] [[Sketcher_Translate|Array transform]]
| Moves or optionally creates copies of selected elements
| [[Image:Sketcher_Rotate.svg|32px]] [[Sketcher_Rotate|Polar transform]]
| Rotates or optionally creates rotated copies of selected elements
|-
| [[Image:Sketcher_Scale.svg|32px]] [[Sketcher_Scale|Scale transform]]
| Scales or optionally creates scaled copies of selected elements
| [[Image:Sketcher_Offset.svg|32px]] [[Sketcher_Offset|Offset geometry]]
| Creates equidistant edges around selected edges
|-
| [[Image:Sketcher_Symmetry.svg|32px]] [[Sketcher_Symmetry|Symmetry]]
| Creates mirrored copies of selected elements
| [[Image:Sketcher_RemoveAxesAlignment.svg|32px]] [[Sketcher_RemoveAxesAlignment|Remove axes alignment]]
| Removes the axes alignment of selected edges by replacing [[Sketcher_ConstrainHorizontal|Horizontal]] and [[Sketcher_ConstrainVertical|Vertical]] constraints with [[Sketcher_ConstrainParallel|Parallel]] and [[Sketcher_ConstrainPerpendicular|Perpendicular]] constraints
|}
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

Please note that all contributions to FreeCAD Documentation are considered to be released under the Creative Commons Attribution (see FreeCAD:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

Formatting help

Cancel Editing help (opens in new window)