Translations:Import from STL or OBJ/7/ro

From FreeCAD Documentation
Revision as of 11:49, 18 September 2018 by Luc (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Închiderea găurilor

sau poate închide, de asemenea, ochii în obiectul mesh de

  • Selectați obiectul dvs. tip plasă din vederea arborescentă
  • Choose Meshes Fill holes... from the top menu
  • Specify maximum number of edges to be filled (3 is default)
  • Since STL and OBJ are meshes consisting of triangles the default number of edges should be sufficient


Another method of manually closing holes in your mesh object would be

  • Selecting your mesh object in the tree view
  • Choose Meshes Close hole from the top menu
  • Select one of the edges of the hole in the mesh object in the 3D view
  • Faceți clic dreapta în vizualizarea 3D și alegeți Leave hole-filling mode pentru a ieși din comandă