Translations:Draft tutorial/104/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "Большинство объектов Draft являются плоскими фигурами, поэтому естественно, что они располагаютс...")
 
(No difference)

Latest revision as of 10:22, 16 March 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Draft tutorial)
Most Draft objects are planar shapes so they are naturally based on a {{Emphasis|working plane}}. A working plane can be one of the main XY, XZ, and YZ global coordinate planes, or it can be a plane that is parallel to them with a positive or negative offset, or it can be a plane defined by the face of a solid object.

Большинство объектов Draft являются плоскими фигурами, поэтому естественно, что они располагаются на рабочей плоскости. Рабочая плоскость может быть одна из основных XY, XZ или YZ глобальных координатных плоскостей или параллельна им с положительным или отрицательным смещением. Также это может быть плоскость заданная поверхностью твердого объекта.