Translations:Draft Move/5/tr: Difference between revisions

From FreeCAD Documentation
(Created page with "# Taşımak veya kopyalamak istediğiniz nesneleri seçin # {{KEY | 16px Taşı}} düğmesine basın veya {{KEY | M}} ve ardında...")
 
No edit summary
Line 1: Line 1:
# Taşımak veya kopyalamak istediğiniz nesneleri seçin
# Taşımak veya kopyalamak istediğiniz nesneleri seçin.
# {{KEY | [[Image: Draft Move.png | 16px]] [[Draft Move/tr|Taşı]]}} düğmesine basın veya {{KEY | M}} ve ardından {{KEY | V}} tuşlarına basın
# {{Button | [[Image: Draft Move.svg | 16px]] [[Draft Move/tr|Taşı]]}} düğmesine basın veya {{KEY | M}} ardından {{KEY | V}} tuşlarına basın. Hiçbir nesne seçilmezse, birini seçmeye davet edilirsiniz.
# 3D görünümünde bir ilk noktaya tıklayın veya bir [[Draft_Coordinates/tr| koordinat]] yazın
# 3B görünümde bir ilk noktaya tıklayın veya bir [[Draft_Coordinates/tr | koordinat]] yazın ve {{Button | [[Image: Draft_AddPoint.svg | 16px]] [[Draft_AddPoint/tr | Nokta ekle]]}} düğmesine basın. Bu işlemin temel noktası olarak görev yapar.
# 3D görünümünde başka bir noktaya tıklayın veya bir [[Draft_Coordinates/tr | koordinat]] yazın
# 3B görünümünde başka bir noktaya tıklayın veya bir [[Draft_Coordinates/tr| koordinat]] yazın ve {{Button | [[Image: Draft_AddPoint.svg | 16px]] [[Draft_AddPoint | Nokta]]}} düğmesine basın. Bu, temel noktadaki yeni konumdur.

Revision as of 19:43, 10 January 2019

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Draft Move)
# Optionally select one or more objects, or one or more subelements of [[Draft_Line|Draft Lines]] or [[Draft_Wire|Draft Wires]].
# There are several ways to invoke the command:
#* Press the {{Button|[[Image:Draft_Move.svg|16px]] [[Draft_Move|Move]]}} button.
#* Select the {{MenuCommand|Modification → [[Image:Draft_Move.svg|16px]] Move}} option from the menu.
#* Use the keyboard shortcut: {{KEY|M}} then {{KEY|V}}.
# If you have not yet selected an object: select an object in the [[3D_view|3D view]].
# The {{MenuCommand|Move}} task panel opens. See [[#Options|Options]] for more information.
# If subelements have been selected: check the {{MenuCommand|Modify subelements}} checkbox to switch on subelement mode.
# Pick the first point, the base point, in the [[3D_view|3D view]], or type coordinates and press the {{Button|[[Image:Draft_AddPoint.svg|16px]] Enter point}} button.
# Pick the second point, the target point, in the [[3D_view|3D view]], or type coordinates and press the {{Button|[[Image:Draft_AddPoint.svg|16px]] Enter point}} button.
  1. Taşımak veya kopyalamak istediğiniz nesneleri seçin.
  2. Taşı düğmesine basın veya M ardından V tuşlarına basın. Hiçbir nesne seçilmezse, birini seçmeye davet edilirsiniz.
  3. 3B görünümde bir ilk noktaya tıklayın veya bir koordinat yazın ve Nokta ekle düğmesine basın. Bu işlemin temel noktası olarak görev yapar.
  4. 3B görünümünde başka bir noktaya tıklayın veya bir koordinat yazın ve Nokta düğmesine basın. Bu, temel noktadaki yeni konumdur.