Translations:Draft Ellipse/14/zh-cn: Difference between revisions

From FreeCAD Documentation
(Created page with "此工具也可用于创建椭圆弧,此时还要指定弧的起始角度与结束角度。而要创建圆与圆弧则可采用底图圆形工具与Draft...")
 
(No difference)

Latest revision as of 10:14, 28 July 2019

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Draft Ellipse)
A Draft Ellipse can be turned into an elliptical arc by setting its {{PropertyData|First Angle}} and {{PropertyData|Last Angle}} properties to different values.

此工具也可用于创建椭圆弧,此时还要指定弧的起始角度与结束角度。而要创建圆与圆弧则可采用底图圆形工具与底图弧形工具。另外,您还可以通过底图B样条底图贝塞尔曲线工具来创建近似的椭圆弧与圆弧。