Translations:CAM Walkthrough for the Impatient/29/pl: Difference between revisions

From FreeCAD Documentation
No edit summary
 
Line 1: Line 1:
11. Dwie operacje zostaną dodane w celu wygenerowania ścieżek frezowania dla tego zadania ścieżki. Operacja [[Path_Profile/pl|Kontur]] tworzy ścieżkę wokół prostopadłościanu, a operacja [[Path_Pocket_Shape/pl|Kształt kieszeni]] tworzy ścieżkę dla wewnętrznej kieszeni.
11. Dwie operacje zostaną dodane w celu wygenerowania ścieżek frezowania dla tego zadania ścieżki. Operacja [[CAM_Profile/pl|Kontur]] tworzy ścieżkę wokół prostopadłościanu, a operacja [[CAM_Pocket_Shape/pl|Kształt kieszeni]] tworzy ścieżkę dla wewnętrznej kieszeni.

Latest revision as of 15:07, 28 March 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (CAM Walkthrough for the Impatient)
11. Two operations will be added to generate milling paths for this CAM Job. The [[CAM_Profile|Profile]] operation creates a path around the box and the [[CAM_Pocket_Shape|Pocket]] operation creates a path for the inner pocket.

11. Dwie operacje zostaną dodane w celu wygenerowania ścieżek frezowania dla tego zadania ścieżki. Operacja Kontur tworzy ścieżkę wokół prostopadłościanu, a operacja Kształt kieszeni tworzy ścieżkę dla wewnętrznej kieszeni.