Translations:CAM ToolShape/7/pl: Difference between revisions

From FreeCAD Documentation
m (FuzzyBot moved page Translations:Path ToolShape/7/pl to Translations:CAM ToolShape/7/pl without leaving a redirect: Part of translatable page "Path ToolShape")
No edit summary
 
Line 10: Line 10:
: {{FileName|v-bit.fcstd}}
: {{FileName|v-bit.fcstd}}
Można je znaleźć w podkatalogu {{FileName|/Mod/Path/Tools/Shape/}}, w którym został zainstalowany program FreeCAD.
Można je znaleźć w podkatalogu {{FileName|/Mod/CAM/Tools/Shape/}}, w którym został zainstalowany program FreeCAD.

Latest revision as of 15:15, 28 March 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (CAM ToolShape)
They are:
: {{FileName|ballend.fcstd}}
: {{FileName|bullnose.fcstd}}
: {{FileName|chamfer.fcstd}}
: {{FileName|drill.fcstd}}
: {{FileName|endmill.fcstd}}
: {{FileName|probe.fcstd}}
: {{FileName|slittingsaw.fcstd}}
: {{FileName|thread-mill.fcstd}}  
: {{FileName|v-bit.fcstd}}
      
These can be found in the {{FileName|Mod/CAM/Tools/Shape/}} subdirectory where FreeCAD was installed.

Są to:

ballend.fcstd
bullnose.fcstd
chamfer.fcstd
drill.fcstd
endmill.fcstd : endmill.fcstd
probe.fcstd
slittingsaw.fcstd
thread-mill.fcstd : thread-mill.fcstd
v-bit.fcstd

Można je znaleźć w podkatalogu /Mod/CAM/Tools/Shape/, w którym został zainstalowany program FreeCAD.