Translations:CAM ToolShape/3/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "Profile narzędziowe są podstawową częścią systemu narzędzi. Profile narzędzi są szablonami, na podstawie których tworzone są końcówki narzędzi...")
 
m (FuzzyBot moved page Translations:Path ToolShape/3/pl to Translations:CAM ToolShape/3/pl without leaving a redirect: Part of translatable page "Path ToolShape")
(No difference)

Revision as of 19:34, 16 March 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (CAM ToolShape)
ToolShapes are a core part of the [[CAM_Tools|CAM Tools]] system. ToolShapes are the templates from which ToolBits are created. They represent the specific physical shape of a tool. A ToolShape does not completely describe the bit - for that some additional parameters are needed which will be added when an actual bit is parameterized from the template.

Profile narzędziowe są podstawową częścią systemu narzędzi. Profile narzędzi są szablonami, na podstawie których tworzone są końcówki narzędzi (ToolBits). Reprezentują one konkretny fizyczny kształt narzędzia. Kształt (ToolShape) nie opisuje w pełni końcówki - do tego potrzebne są dodatkowe parametry, które zostaną dodane, gdy rzeczywista końcówka zostanie określona parametrami na podstawie szablonu.