Translations:Assembly3 Workbench/67/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "* Переименуйте файл * # Используя файловый менеджер скопируйте файл, который хотите переименова...")
(No difference)

Revision as of 04:22, 21 January 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Assembly3 Workbench)
* Rename a file
*# Use a file manager and copy the file you want renamed. Then give the new name to the copy. 
*# Open the copy in FreeCAD. The assembly and the old file should also be open
*# Select the old object in the tree and click to change the propery "Linked object" (it does contain the old filename)
*# A list dialog will open containing all open parts. It shows the filenames and objects of each part. The old part and object is selected. Locate the renamed part in the tree and select the same object in the new part. Then confim the selection.
*# Delete the old part in the tree. Also the file can be deleted now.
*# Constraints and elements of te old part became invalid. Open the constraint or Elements list in the tree. Then sequentially 
*#* select each element surface on the new part. An item in the tree will be highliged. 
*#* Take that item and drag&drop it over the old element (either in the element list or in one of the constraints where it was used). That element should become valid. 
*#* Repeat the procedure for the remaining elements. Often a single element is enough to allow Assembly3 to identify the remaining elements of the part automatically. 
*#* If an element was assigned to the wrong surface by accident, just repeat with the correct surface. 
*# Change the object name in FreeCAD, if desired
  • Переименуйте файл
  • # Используя файловый менеджер скопируйте файл, который хотите переименовать. Затем дайте копии новое имя.
  • # Откройте копию в FreeCAD. Сборка и старый файл тоже должны быть открыты
  • # Выберите старый объект в дереве и нажмите на поле для изменения свойства "Linked object" («Связанный объект») (оно должно содержать старое имя файла)
  • # Откроется диалоговое окно со списком всех открытых деталей. Он показывает имена файлов и объекты каждой детали. Выберите старую деталь и объект. Найдите переименованную деталь в дереве и выберите тот же объект в новой детали. Затем подтвердите выбор.
  • # Удалить старую деталь в дереве. Также можно удалить и файл.
  • # Ограничения и элементы старой детали стали недействительными. Откройте ограничения или список элементов в дереве. Затем последовательно
  • # * выберите грани каждого элемента на новой детали. Элемент в дереве будет выделен.
  • # * Возьмите этот элемент и перетащите его на старый элемент (либо в списке элементов, либо в одном из ограничений, где он использовался). Этот элемент должен стать действительным.
  • # * Повторите процедуру для остальных элементов. Часто одного элемента достаточно, чтобы Assembly3 могла автоматически идентифицировать остальные элементы детали.
  • # * Если элемент был случайно назначен не той поверхности, просто повторите с правильной гранью.
  • # При желании измените имя объекта в FreeCAD