Translations:Arch tutorial/66/it: Difference between revisions

From FreeCAD Documentation
(Created page with "Ora deve essere risolta un'ultima cosa, c'è una piccola soletta in bagno, che interseca alcuni muri. Risolviamo questo creando un nuovo volume sottrazione e sottraendolo poi ...")
 
(No difference)

Latest revision as of 21:27, 18 March 2014

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Arch tutorial)
Now one last thing must be fixed, there is a small slab in the bathroom, that intersects some walls. Let's fix that by creating a new subtraction volume, and subtract it from those walls. Another feature of the [[Draft Trimex|Draft Trimex]] tool, that we use to extrude stuff, is that it can also extrude one single face of an existing object. This creates a new, separate object, so there is no risk to "harm" the other object. So we can select the base face of the small slab (look at it from beneath the model, you'll see it), then press the [[Draft Trimex|Draft Trimex]] button, and extrude it up to well above the roofs. Then, subtract it from the two inner bathroom walls with the [[Arch Remove|Arch Remove]] tool:

Ora deve essere risolta un'ultima cosa, c'è una piccola soletta in bagno, che interseca alcuni muri. Risolviamo questo creando un nuovo volume sottrazione e sottraendolo poi a tali muri. Un'altra caratteristica dello strumento Estendi che usiamo per estrudere delle cose, è che si può anche estrudere una sola faccia di un oggetto esistente. Questo crea un nuovo oggetto separato, quindi non c'è rischio di "danneggiare" l'altro oggetto. Quindi possiamo selezionare la faccia di base della soletta piccola (si vede guardando il modello dal basso), poi premere il pulsante Estendi, ed estruderla ben oltre i tetti. Dopo, sottrarre il volume dalle due pareti interne del bagno con lo strumento Rimuovi: