Translations:Arch Wall/3/zh-tw: Difference between revisions

From FreeCAD Documentation
(Created page with "本工具自草圖或任何 物件mesh 生成牆體。一面牆無須以任何物件為生成基礎,這時牆為一立方體,以長寬...")
 
(relink module to workbench)
 
Line 1: Line 1:
本工具自草圖或任何 [[Part Module|物件]] 或 [[Mesh Module|mesh]] 生成牆體。一面牆無須以任何物件為生成基礎,這時牆為一立方體,以長寬高為其屬性。牆由其他形狀生成時,可基於:
本工具自草圖或任何 [[Part Workbench|物件]] 或 [[Mesh Workbench|mesh]] 生成牆體。一面牆無須以任何物件為生成基礎,這時牆為一立方體,以長寬高為其屬性。牆由其他形狀生成時,可基於:

Latest revision as of 12:59, 22 August 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Arch Wall)
This tool builds a Wall object from scratch or on top of any other [[Part Workbench|shape]]-based or [[Mesh Workbench|mesh]]-based object. A wall can be built without any base object, in which case it behaves as a cubic volume, using length, width and height properties. When built on top of an existing shape, a wall can be based on:

本工具自草圖或任何 物件mesh 生成牆體。一面牆無須以任何物件為生成基礎,這時牆為一立方體,以長寬高為其屬性。牆由其他形狀生成時,可基於: