Sketcher CreateArcOfHyperbola/de: Difference between revisions
(Created page with "==Beschreibung==") |
(Created page with "==Anwendung==") |
||
Line 17: | Line 17: | ||
{{Version|0.17}} |
{{Version|0.17}} |
||
== |
==Anwendung== |
||
# Press the {{KEY|[[File:Sketcher Hyperbolic Arc.png|24px]] '''Create an arc of hyperbola'''}} button. |
# Press the {{KEY|[[File:Sketcher Hyperbolic Arc.png|24px]] '''Create an arc of hyperbola'''}} button. |
Revision as of 03:22, 5 November 2018
Sketcher Hyperbel erstellen |
Menüeintrag |
---|
Sketch → Skizzengeometrien → Bogen einer Hyperbel erstellen |
Arbeitsbereich |
Sketcher |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
0.17 |
Siehe auch |
Sketcher Ellipsen-Bogens, Sketcher Bogen der Parabel |
Beschreibung
This tool creates an arc of hyperbola by center, major radius and endpoints.
Anwendung
- Press the Create an arc of hyperbola button.
- Click in the 3D view to define the major radius center (labelled 1 in the picture above).
- Click in the 3D view to define the major radius length, which is also the tip of the arc of hyperbola (labelled 2 in the picture above).
- Move the mouse away from the two last selected points to see how the arc will look like. Click again when the approximate desired curvature is shown. This point will define the first end point (labelled 3 in the picture above).
- Click a fourth time in the 3D view to define the other end point (labelled 4 in the picture above).