Sketcher ConstrainSymmetric/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 9: Line 9:


==Descriere==
==Descriere==
Constrângerea de simetrie obligă două puncte selectate pentru a deveni simetrice cu o anumită linie de simetrie, adică două puncte selectate sunt constrânse să stea pe o linie normală care trece prin cele două puncte și sunt constrânse să fie echidistan0te față de linia de simetrie. Alternativ, poate forța două puncte să fie simetrice față de al treilea.
The symmetrical constraint constrains two selected points to be symmetrical around a given line, i.e., both selected points are constrained to lie on a normal to the line through both points and are constrained to be equidistant from the line. Alternatively it can constrain two points to be symmetric with respect to a third one.


==Utilizare==
==Utilizare==

Revision as of 07:34, 7 October 2018

Sketcher ConstrainSymmetric

Menu location
Sketch → Sketcher constraints → Constrain symmetrical
Workbenches
Sketcher
Default shortcut
S
Introduced in version
-
See also
Constraint Parallel

Descriere

Constrângerea de simetrie obligă două puncte selectate pentru a deveni simetrice cu o anumită linie de simetrie, adică două puncte selectate sunt constrânse să stea pe o linie normală care trece prin cele două puncte și sunt constrânse să fie echidistan0te față de linia de simetrie. Alternativ, poate forța două puncte să fie simetrice față de al treilea.

Utilizare



Select two points (vertexes) in the sketch and a line in the sketch. The selected points and the line will be dark green.



Click on the SymmetricalConstraint icon in the Sketcher toolbar or select the Constrain Symmetrical menu item from the Sketcher Constraints sub menu of the Sketcher (or Part Design) menu item. This will apply the constraint to the selected items.



This is a geometric constraint and has no editable parameters.