Sketcher Segmente de Legătură
Sketcher ConnectLines |
poziția meniului |
---|
Sketch → Sketcher tools → Connect Edges |
Ateliere |
Sketcher |
scurtătură |
Ctrl+Shift+K |
Prezentat în versiune |
0.15 |
A se vedea, de asemenea, |
nici unul |
Descriere
Applies Coincident constraints to endpoints with the same coordinates of the selected elements.
Utilizare
Selectați elementele din vizualizarea 3D sau din caseta de listă din partea stângă a ecranului și faceți clic pe pictograma.
Select the elements in the 3D-view or in the listbox on the left side of the screen and click on the icon.
Note
Înainte de a utiliza această comandă, asigurați-vă că deja sunt aplicate elemente de constrângere (orizontală, verticală, tangențială). Selectarea elementelor într-o ordine anti orară pare să producă rezultate mai bune.
Before using this command make sure that obvious constraints (horizontal, vertical, tangential) are already applied to the elements. Selecting the elements in a counter-clock-wise order seems to produce better results.